[PATCH v4 2/8] clk: loongson2: Allow specifying clock flags for gate clock

[Yao Zi <ziyao@disroot.org>]

Some gate clocks need to be supplied with flags, e.g., it may be
required to specify CLK_IS_CRTICAL for CPU clocks.

Add a field to loongson2_clk_board_info for representing clock flags,
and specify it when registering gate clocks. A new helper macro,
CLK_GATE_FLAGS, is added to simplify definitions.

Signed-off-by: Yao Zi <ziyao@disroot.org>
---
 drivers/clk/clk-loongson2.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/clk-loongson2.c b/drivers/clk/clk-loongson2.c
index 27e632edd484..cc3fb13e770f 100644
--- a/drivers/clk/clk-loongson2.c
+++ b/drivers/clk/clk-loongson2.c
@@ -50,6 +50,7 @@ struct loongson2_clk_board_info {
 	const char *name;
 	const char *parent_name;
 	unsigned long fixed_rate;
+	unsigned long flags;
 	u8 reg_offset;
 	u8 div_shift;
 	u8 div_width;
@@ -105,6 +106,18 @@ struct loongson2_clk_board_info {
 		.bit_idx	= _bidx,			\
 	}
 
+#define CLK_GATE_FLAGS(_id, _name, _pname, _offset, _bidx,	\
+		       _flags)					\
+	{							\
+		.id		= _id,				\
+		.type		= CLK_TYPE_GATE,		\
+		.name		= _name,			\
+		.parent_name	= _pname,			\
+		.reg_offset	= _offset,			\
+		.bit_idx	= _bidx,			\
+		.flags		= _flags			\
+	}
+
 #define CLK_FIXED(_id, _name, _pname, _rate)			\
 	{							\
 		.id		= _id,				\
@@ -332,7 +345,8 @@ static int loongson2_clk_probe(struct platform_device *pdev)
 							  &clp->clk_lock);
 			break;
 		case CLK_TYPE_GATE:
-			hw = devm_clk_hw_register_gate(dev, p->name, p->parent_name, 0,
+			hw = devm_clk_hw_register_gate(dev, p->name, p->parent_name,
+						       p->flags,
 						       clp->base + p->reg_offset,
 						       p->bit_idx, 0,
 						       &clp->clk_lock);
-- 
2.50.1