Re: [PATCH] dt-bindings: clock: vf610: Add definitions for MTIP L2 switch

["Łukasz Majewski" <lukma@nabladev.com>]

Hi Conor,

> On Thu, Jan 22, 2026 at 01:58:38PM +0100, Lukasz Majewski wrote:
> > This patch adds VF610_CLK_ESW and VF610_CLK_ESW_MAC_TAB{0123}
> > macros definitions for L2 switch.
> > 
> > Those definitions describe clocks for MoreThanIP switch IP block;
> > the switch itself and the MAC address lookup table clocks.
> > 
> > Signed-off-by: Lukasz Majewski <lukma@nabladev.com>
> > ---
> >  include/dt-bindings/clock/vf610-clock.h | 7 ++++++-
> >  1 file changed, 6 insertions(+), 1 deletion(-)
> > 
> > diff --git a/include/dt-bindings/clock/vf610-clock.h
> > b/include/dt-bindings/clock/vf610-clock.h index
> > 373644e46747..b6f7b1745cc2 100644 ---
> > a/include/dt-bindings/clock/vf610-clock.h +++
> > b/include/dt-bindings/clock/vf610-clock.h @@ -197,6 +197,11 @@
> >  #define VF610_CLK_TCON1			188
> >  #define VF610_CLK_CAAM			189
> >  #define VF610_CLK_CRC			190
> > -#define VF610_CLK_END			191  
> 
> If end is modifiable, it is removable. If you need the define for the
> driver, please move it there.

Could you be more specific regarding your comment?

The VF610_CLK_END has now value 191.

However, there are other clocks in this SoC - like CLK_ESW and
CLK_MAC_TAB{x} - which were not taken into account earlier.

What shall be done?

Shall I remove the VF610_CLK_END entirely?

Or move to the new "end" (as done with this patch)?

> 
> pw-bot: changes-requested
> 
> > +#define VF610_CLK_ESW			191
> > +#define VF610_CLK_ESW_MAC_TAB0		192
> > +#define VF610_CLK_ESW_MAC_TAB1		193
> > +#define VF610_CLK_ESW_MAC_TAB2		194
> > +#define VF610_CLK_ESW_MAC_TAB3		195
> > +#define VF610_CLK_END			196
> >  
> >  #endif /* __DT_BINDINGS_CLOCK_VF610_H */
> > -- 
> > 2.39.5
> >   


-- 
Best regards,

Lukasz Majewski

--
Nabla Software Engineering GmbH
HRB 40522 Augsburg
Phone: +49 821 45592596
E-Mail: office@nabladev.com
Managing Director : Stefano Babic