public inbox for linux-clk@vger.kernel.org
 help / color / mirror / Atom feed
From: "Benoît Monin" <benoit.monin@bootlin.com>
To: "Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
	"Gregory CLEMENT" <gregory.clement@bootlin.com>,
	"Théo Lebrun" <theo.lebrun@bootlin.com>,
	"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
	"Rob Herring" <robh@kernel.org>,
	"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Stephen Boyd" <sboyd@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Linus Walleij" <linusw@kernel.org>
Cc: "Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
	"Tawfik Bayouk" <tawfik.bayouk@mobileye.com>,
	linux-mips@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org,
	"Benoît Monin" <benoit.monin@bootlin.com>
Subject: [PATCH v4 11/13] MIPS: Add Mobileye EyeQ6Lplus evaluation board dts
Date: Mon, 16 Mar 2026 16:25:48 +0100	[thread overview]
Message-ID: <20260316-eyeq6lplus-v4-11-bf44dfc7a261@bootlin.com> (raw)
In-Reply-To: <20260316-eyeq6lplus-v4-0-bf44dfc7a261@bootlin.com>

Add the device tree of the evaluation board of the EyeQ6Lplus SoC.

The board comes with 2GB of RAM and an SPI NAND connected to the octoSPI
controller The UART of the SoC is used as the serial console.

Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
---
 arch/mips/boot/dts/mobileye/Makefile            |   1 +
 arch/mips/boot/dts/mobileye/eyeq6lplus-epm6.dts | 103 ++++++++++++++++++++++++
 2 files changed, 104 insertions(+)

diff --git a/arch/mips/boot/dts/mobileye/Makefile b/arch/mips/boot/dts/mobileye/Makefile
index 7cc89968aaac..9305dd01f4c8 100644
--- a/arch/mips/boot/dts/mobileye/Makefile
+++ b/arch/mips/boot/dts/mobileye/Makefile
@@ -3,3 +3,4 @@
 
 dtb-$(CONFIG_MACH_EYEQ5)		+= eyeq5-epm5.dtb
 dtb-$(CONFIG_MACH_EYEQ6H)		+= eyeq6h-epm6.dtb
+dtb-$(CONFIG_MACH_EYEQ6LPLUS)		+= eyeq6lplus-epm6.dtb
diff --git a/arch/mips/boot/dts/mobileye/eyeq6lplus-epm6.dts b/arch/mips/boot/dts/mobileye/eyeq6lplus-epm6.dts
new file mode 100644
index 000000000000..404d0ff09f5a
--- /dev/null
+++ b/arch/mips/boot/dts/mobileye/eyeq6lplus-epm6.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Copyright 2025 Mobileye Vision Technologies Ltd.
+ */
+
+/dts-v1/;
+
+#include "eyeq6lplus.dtsi"
+
+/ {
+	compatible = "mobileye,eyeq6lplus-epm6", "mobileye,eyeq6lplus";
+	model = "Mobileye EyeQ6Lplus Evaluation board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x1 0x00000000 0x0 0x80000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* These reserved memory regions are also defined in bootmanager
+		 * for configuring inbound translation for BARS, don't change
+		 * these without syncing with bootmanager
+		 */
+		mhm_reserved_0: the-mhm-reserved-0 {
+			reg = <0x1 0x00000000 0x0 0x0000800>;
+		};
+		bm_logs_reserved: bm-logs-reserved {
+			reg = <0x1 0x0000800 0x0 0x000f800>;
+		};
+		shmem0_reserved: shmem@804000000 {
+			reg = <0x1 0x04000000 0x0 0x1000000>;
+		};
+		shmem1_reserved: shmem@805000000 {
+			reg = <0x1 0x05000000 0x0 0x1000000>;
+		};
+		mini_coredump0_reserved: mini-coredump0@806200000 {
+			reg = <0x1 0x06200000 0x0 0x100000>;
+		};
+		mailbox_reserved: mailbox-reserved {
+			reg = <0x1 0x06300000 0x0 0x000300>;
+		};
+		sys_logs_reserved: sys-logs-reserved {
+			reg = <0x1 0x10000000 0x0 0x800000>;
+		};
+		csl_policy_logs_reserved: csl-policy-logs-reserved {
+			reg = <0x1 0x10800000 0x0 0x10000>;
+		};
+	};
+};
+
+&ospi {
+	status = "okay";
+	flash@0 {
+		compatible = "spi-nand";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+		cdns,read-delay = <0>;
+		cdns,tshsl-ns = <400>;
+		cdns,tsd2d-ns = <120>;
+		cdns,tchsh-ns = <40>;
+		cdns,tslch-ns = <20>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <8>;
+	};
+};
+
+&spi0 {
+	pinctrl-0 = <&spi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&spi1 {
+	pinctrl-0 = <&spi1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+};

-- 
2.53.0


  parent reply	other threads:[~2026-03-16 15:26 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-03-16 15:25 [PATCH v4 00/13] Introducing the Mobileye EyeQ6Lplus SoC Benoît Monin
2026-03-16 15:25 ` [PATCH v4 01/13] dt-bindings: mips: Add " Benoît Monin
2026-03-16 15:25 ` [PATCH v4 02/13] dt-bindings: soc: mobileye: Add EyeQ6Lplus OLB Benoît Monin
2026-03-23  9:03   ` Linus Walleij
2026-03-24  0:26   ` Stephen Boyd
2026-03-16 15:25 ` [PATCH v4 03/13] MIPS: Add Mobileye EyeQ6Lplus support Benoît Monin
2026-03-16 15:25 ` [PATCH v4 04/13] reset: eyeq: Add Mobileye EyeQ6Lplus OLB Benoît Monin
2026-03-16 15:25 ` [PATCH v4 05/13] pinctrl: eyeq5: Use match data Benoît Monin
2026-03-23  9:04   ` Linus Walleij
2026-03-16 15:25 ` [PATCH v4 06/13] pinctrl: eyeq5: Add Mobileye EyeQ6Lplus OLB Benoît Monin
2026-03-23  9:05   ` Linus Walleij
2026-03-24 14:04     ` Thomas Bogendoerfer
2026-03-25 12:50       ` Benoît Monin
2026-03-16 15:25 ` [PATCH v4 07/13] clk: eyeq: Skip post-divisor when computing PLL frequency Benoît Monin
2026-03-24  0:30   ` Stephen Boyd
2026-03-16 15:25 ` [PATCH v4 08/13] clk: eyeq: Adjust PLL accuracy computation Benoît Monin
2026-03-24  0:30   ` Stephen Boyd
2026-03-16 15:25 ` [PATCH v4 09/13] clk: eyeq: Add Mobileye EyeQ6Lplus OLB Benoît Monin
2026-03-24  0:30   ` Stephen Boyd
2026-03-16 15:25 ` [PATCH v4 10/13] MIPS: Add Mobileye EyeQ6Lplus SoC dtsi Benoît Monin
2026-03-16 15:25 ` Benoît Monin [this message]
2026-03-16 15:25 ` [PATCH v4 12/13] MIPS: config: add eyeq6lplus_defconfig Benoît Monin
2026-03-16 15:25 ` [PATCH v4 13/13] MAINTAINERS: Mobileye: Add EyeQ6Lplus files Benoît Monin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260316-eyeq6lplus-v4-11-bf44dfc7a261@bootlin.com \
    --to=benoit.monin@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregory.clement@bootlin.com \
    --cc=krzk+dt@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=tawfik.bayouk@mobileye.com \
    --cc=theo.lebrun@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=vladimir.kondratiev@mobileye.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox