From: Pengyu Luo <mitltlatltl@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>
Cc: Pengyu Luo <mitltlatltl@gmail.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH] clk: qcom: rcg2: expand frac table for mdss_pixel_clk_src
Date: Sat, 21 Mar 2026 17:50:28 +0800 [thread overview]
Message-ID: <20260321095029.2259489-1-mitltlatltl@gmail.com> (raw)
Recently, when testing 10-bit dsi C-PHY panel, clks are different
from the usual. (dsi0_phy_pll_out_dsiclk's parent is dsi0_pll_bit_clk
now (dsiclk_sel = 0)) And we failed to set dsiclk's children.
dsi_link_clk_set_rate_6g: Set clk rates: pclk=172992000, byteclk=108120000
byteclk was set first to 108120000, so the vco rate was set to
108120000 * 7 * 1 * 1 = 756840000. When we was trying to set
172992000 on mdss_pixel_clk_src later.
Since there was no matched ratio, we failed to set it. And dsiclk
divider ratio was set to 15:1 (wrong cached register value 0xf and
didn't update), we finally got 50455997, apparently wrong.
dsi0vco_clk 1 1 0 756839941
dsi0_pll_out_div_clk 1 1 0 756839941
dsi0_pll_post_out_div_clk 0 0 0 216239983
dsi0_pll_bit_clk 2 2 0 756839941
dsi0_phy_pll_out_dsiclk 2 2 0 50455997
disp_cc_mdss_pclk1_clk_src 1 1 0 50455997
dsi0_pll_by_2_bit_clk 0 0 0 378419970
dsi0_phy_pll_out_byteclk 2 2 0 108119991
disp_cc_mdss_byte1_clk_src 2 2 0 108119991
Downstream clk_summary shows the mdss_pixel_clk_src support the
ratio(35:16)
dsi0_phy_pll_out_dsiclk 2 2 0 378420000
disp_cc_mdss_pclk1_clk_src 1 1 0 172992000
dsi0_phy_pll_out_byteclk 2 2 0 108120000
disp_cc_mdss_byte1_clk_src 2 2 0 108120000
After checking downstream source, 15:4 also seems to be supported,
add them two.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
---
drivers/clk/qcom/clk-rcg2.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c
index fc696b66cc..6064a0e17d 100644
--- a/drivers/clk/qcom/clk-rcg2.c
+++ b/drivers/clk/qcom/clk-rcg2.c
@@ -1117,6 +1117,8 @@ static const struct frac_entry frac_table_pixel[] = {
{ 4, 9 },
{ 1, 1 },
{ 2, 3 },
+ { 16, 35},
+ { 4, 15},
{ }
};
--
2.53.0
next reply other threads:[~2026-03-21 9:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-21 9:50 Pengyu Luo [this message]
2026-03-21 21:46 ` [PATCH] clk: qcom: rcg2: expand frac table for mdss_pixel_clk_src Dmitry Baryshkov
2026-03-23 4:24 ` Taniya Das
2026-03-23 4:26 ` Taniya Das
2026-03-23 12:54 ` Konrad Dybcio
2026-03-23 19:23 ` Dmitry Baryshkov
2026-03-24 9:22 ` Konrad Dybcio
2026-03-24 12:56 ` Pengyu Luo
2026-03-24 13:00 ` Konrad Dybcio
2026-03-24 3:05 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260321095029.2259489-1-mitltlatltl@gmail.com \
--to=mitltlatltl@gmail.com \
--cc=andersson@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox