From: Marek Vasut <marex@nabladev.com>
To: linux-clk@vger.kernel.org
Cc: Marek Vasut <marex@nabladev.com>,
Michael Walle <mwalle@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Michael Walle <michael@walle.cc>, Rob Herring <robh@kernel.org>,
Stephen Boyd <sboyd@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 4/4] clk: fsl-sai: Add MCLK generation support
Date: Sat, 4 Apr 2026 20:33:28 +0200 [thread overview]
Message-ID: <20260404183419.46455-4-marex@nabladev.com> (raw)
In-Reply-To: <20260404183419.46455-1-marex@nabladev.com>
The driver currently supports generating BCLK. There are systems which
require generation of MCLK instead. Register new MCLK clock and handle
clock-cells = <1> to differentiate between BCLK and MCLK. In case of a
legacy system with clock-cells = <0>, the driver behaves as before, i.e.
always returns BCLK.
Note that it is not possible re-use the current SAI audio driver to
generate MCLK and correctly enable and disable the MCLK.
If SAI (audio driver) is used to control the MCLK enablement, then MCLK
clock is not always enabled, and it is not necessarily enabled when the
codec may need the clock to be enabled. There is also no way for the
codec node to specify phandle to clock provider in DT, because the SAI
(audio driver) is not clock provider.
If SAI (clock driver) is used to control the MCLK enablement, then MCLK
clock is enabled when the codec needs the clock enabled, because the
codec is the clock consumer and the SAI (clock driver) is the clock
provider, and the codec driver can request the clock to be enabled when
needed. There is also the usual phandle to clock provider in DT, because
the SAI (clock driver) is clock provider.
Acked-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Marek Vasut <marex@nabladev.com>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzk+dt@kernel.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
V2: No change
V3: - Rebase on current next, update mail address
- Update commit message according to clarify the difference between
SAI audio and SAI clock driver
- Pick ancient AB from Michael, although this may be outdated
https://patchwork.kernel.org/project/alsa-devel/patch/20241226162234.40141-4-marex@denx.de/
---
drivers/clk/clk-fsl-sai.c | 74 ++++++++++++++++++++++++++++++++-------
1 file changed, 61 insertions(+), 13 deletions(-)
diff --git a/drivers/clk/clk-fsl-sai.c b/drivers/clk/clk-fsl-sai.c
index 336aa8477d0ea..f00b49edb2e9f 100644
--- a/drivers/clk/clk-fsl-sai.c
+++ b/drivers/clk/clk-fsl-sai.c
@@ -7,6 +7,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/of.h>
@@ -15,21 +16,37 @@
#define I2S_CSR 0x00
#define I2S_CR2 0x08
+#define I2S_MCR 0x100
#define CSR_BCE_BIT 28
+#define CSR_TE_BIT 31
#define CR2_BCD BIT(24)
#define CR2_DIV_SHIFT 0
#define CR2_DIV_WIDTH 8
+#define MCR_MOE BIT(30)
struct fsl_sai_clk {
- struct clk_divider div;
- struct clk_gate gate;
+ struct clk_divider bclk_div;
+ struct clk_divider mclk_div;
+ struct clk_gate bclk_gate;
+ struct clk_gate mclk_gate;
+ struct clk_hw *bclk_hw;
+ struct clk_hw *mclk_hw;
spinlock_t lock;
};
struct fsl_sai_data {
unsigned int offset; /* Register offset */
+ bool have_mclk; /* Have MCLK control */
};
+static struct clk_hw *
+fsl_sai_of_clk_get(struct of_phandle_args *clkspec, void *data)
+{
+ struct fsl_sai_clk *sai_clk = data;
+
+ return clkspec->args[0] ? sai_clk->mclk_hw : sai_clk->bclk_hw;
+}
+
static int fsl_sai_clk_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -54,37 +71,68 @@ static int fsl_sai_clk_probe(struct platform_device *pdev)
spin_lock_init(&sai_clk->lock);
- sai_clk->gate.reg = base + data->offset + I2S_CSR;
- sai_clk->gate.bit_idx = CSR_BCE_BIT;
- sai_clk->gate.lock = &sai_clk->lock;
+ sai_clk->bclk_gate.reg = base + data->offset + I2S_CSR;
+ sai_clk->bclk_gate.bit_idx = CSR_BCE_BIT;
+ sai_clk->bclk_gate.lock = &sai_clk->lock;
- sai_clk->div.reg = base + data->offset + I2S_CR2;
- sai_clk->div.shift = CR2_DIV_SHIFT;
- sai_clk->div.width = CR2_DIV_WIDTH;
- sai_clk->div.lock = &sai_clk->lock;
+ sai_clk->bclk_div.reg = base + data->offset + I2S_CR2;
+ sai_clk->bclk_div.shift = CR2_DIV_SHIFT;
+ sai_clk->bclk_div.width = CR2_DIV_WIDTH;
+ sai_clk->bclk_div.lock = &sai_clk->lock;
/* set clock direction, we are the BCLK master */
writel(CR2_BCD, base + data->offset + I2S_CR2);
- hw = devm_clk_hw_register_composite_pdata(dev, dev->of_node->name,
+ hw = devm_clk_hw_register_composite_pdata(dev, "BCLK",
&pdata, 1, NULL, NULL,
- &sai_clk->div.hw,
+ &sai_clk->bclk_div.hw,
&clk_divider_ops,
- &sai_clk->gate.hw,
+ &sai_clk->bclk_gate.hw,
&clk_gate_ops,
CLK_SET_RATE_GATE);
if (IS_ERR(hw))
return PTR_ERR(hw);
- return devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, hw);
+ sai_clk->bclk_hw = hw;
+
+ if (data->have_mclk) {
+ sai_clk->mclk_gate.reg = base + data->offset + I2S_CSR;
+ sai_clk->mclk_gate.bit_idx = CSR_TE_BIT;
+ sai_clk->mclk_gate.lock = &sai_clk->lock;
+
+ sai_clk->mclk_div.reg = base + I2S_MCR;
+ sai_clk->mclk_div.shift = CR2_DIV_SHIFT;
+ sai_clk->mclk_div.width = CR2_DIV_WIDTH;
+ sai_clk->mclk_div.lock = &sai_clk->lock;
+
+ pdata.index = 1; /* MCLK1 */
+ hw = devm_clk_hw_register_composite_pdata(dev, "MCLK",
+ &pdata, 1, NULL, NULL,
+ &sai_clk->mclk_div.hw,
+ &clk_divider_ops,
+ &sai_clk->mclk_gate.hw,
+ &clk_gate_ops,
+ CLK_SET_RATE_GATE);
+ if (IS_ERR(hw))
+ return PTR_ERR(hw);
+
+ sai_clk->mclk_hw = hw;
+
+ /* set clock direction, we are the MCLK output */
+ writel(MCR_MOE, base + I2S_MCR);
+ }
+
+ return devm_of_clk_add_hw_provider(dev, fsl_sai_of_clk_get, sai_clk);
}
static const struct fsl_sai_data fsl_sai_vf610_data = {
.offset = 0,
+ .have_mclk = false,
};
static const struct fsl_sai_data fsl_sai_imx8mq_data = {
.offset = 8,
+ .have_mclk = true,
};
static const struct of_device_id of_fsl_sai_clk_ids[] = {
--
2.53.0
next prev parent reply other threads:[~2026-04-04 18:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-04 18:33 [PATCH v3 1/4] dt-bindings: clock: fsl-sai: Document i.MX8M support Marek Vasut
2026-04-04 18:33 ` [PATCH v3 2/4] clk: fsl-sai: Add i.MX8M support with 8 byte register offset Marek Vasut
2026-04-06 16:42 ` Brian Masney
2026-04-04 18:33 ` [PATCH v3 3/4] dt-bindings: clock: fsl-sai: Document clock-cells = <1> support Marek Vasut
2026-04-04 18:33 ` Marek Vasut [this message]
2026-04-06 17:10 ` [PATCH v3 4/4] clk: fsl-sai: Add MCLK generation support Brian Masney
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260404183419.46455-4-marex@nabladev.com \
--to=marex@nabladev.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael@walle.cc \
--cc=mturquette@baylibre.com \
--cc=mwalle@kernel.org \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox