From: Christian Marangi <ansuelsmth@gmail.com>
To: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney@redhat.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: Christian Marangi <ansuelsmth@gmail.com>
Subject: [PATCH 2/2] clk: en7523: add support for dedicated PCIe PERSTOUT reset
Date: Thu, 23 Jul 2026 21:01:31 +0200 [thread overview]
Message-ID: <20260723190133.22577-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20260723190133.22577-1-ansuelsmth@gmail.com>
Add support for resetting the PCIe lines with the PERSTOUT reset. These
special reset are controlled by the PCIC register and are specific to each
of the 3 PCIe lines.
Contrary to the dedicated reset register where 0 deassert and 1 assert the
reset line for the related bit, for PCIe PERSTOUT reset in the PCIC
register, the deassert and assert value is swapped, with 1 for deassert and
0 for assert. (HW have these bit set as 1 by default after a cold boot)
This is internally handled in the reset function.
PCI enable/disable are updated to drop PERSTOUT bits in favor dedicated
reset handling.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
drivers/clk/clk-en7523.c | 36 ++++++++++++++++++++++++++----------
1 file changed, 26 insertions(+), 10 deletions(-)
diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
index 1ab0e2eca5d3..2f53e0b42ead 100644
--- a/drivers/clk/clk-en7523.c
+++ b/drivers/clk/clk-en7523.c
@@ -338,6 +338,7 @@ static const struct en_clk_desc en7581_base_clks[] = {
static const u16 en7581_rst_ofs[] = {
REG_RST_CTRL2,
REG_RST_CTRL1,
+ REG_NP_SCU_PCIC,
};
static const u16 en751221_rst_ofs[] = {
@@ -450,6 +451,11 @@ static const u16 en7581_rst_map[] = {
[EN7581_CPU_TIMER_RST] = RST_NR_PER_BANK + 28,
[EN7581_PCIE_HB_RST] = RST_NR_PER_BANK + 29,
[EN7581_XPON_MAC_RST] = RST_NR_PER_BANK + 31,
+
+ /* RST_PCIC */
+ [EN7581_PCIC_PERSTOUT0_RST] = 2 * RST_NR_PER_BANK + 29,
+ [EN7581_PCIC_PERSTOUT1_RST] = 2 * RST_NR_PER_BANK + 26,
+ [EN7581_PCIC_PERSTOUT2_RST] = 2 * RST_NR_PER_BANK + 16,
};
static const u16 en751221_rst_map[] = {
@@ -635,9 +641,7 @@ static int en7581_pci_enable(struct clk_hw *hw)
void __iomem *np_base = cg->base;
u32 val, mask;
- mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1 |
- REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT2 |
- REG_PCI_CONTROL_PERSTOUT;
+ mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
val = readl(np_base + REG_PCI_CONTROL);
writel(val | mask, np_base + REG_PCI_CONTROL);
@@ -650,9 +654,7 @@ static void en7581_pci_disable(struct clk_hw *hw)
void __iomem *np_base = cg->base;
u32 val, mask;
- mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1 |
- REG_PCI_CONTROL_PERSTOUT1 | REG_PCI_CONTROL_PERSTOUT2 |
- REG_PCI_CONTROL_PERSTOUT;
+ mask = REG_PCI_CONTROL_REFCLK_EN0 | REG_PCI_CONTROL_REFCLK_EN1;
val = readl(np_base + REG_PCI_CONTROL);
writel(val & ~mask, np_base + REG_PCI_CONTROL);
usleep_range(1000, 2000);
@@ -754,11 +756,17 @@ static int en7523_reset_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
struct en_rst_data *rst_data = container_of(rcdev, struct en_rst_data, rcdev);
- void __iomem *addr = rst_data->base + rst_data->bank_ofs[id / RST_NR_PER_BANK];
+ u32 offset = rst_data->bank_ofs[id / RST_NR_PER_BANK];
+ void __iomem *addr = rst_data->base + offset;
+ bool inverted = false;
u32 val;
+ /* For PCIC reset logic is inverted, 0:assert 1:deassert */
+ if (offset == REG_NP_SCU_PCIC)
+ inverted = true;
+
val = readl(addr);
- if (assert)
+ if (assert ^ inverted)
val |= BIT(id % RST_NR_PER_BANK);
else
val &= ~BIT(id % RST_NR_PER_BANK);
@@ -783,9 +791,17 @@ static int en7523_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
struct en_rst_data *rst_data = container_of(rcdev, struct en_rst_data, rcdev);
- void __iomem *addr = rst_data->base + rst_data->bank_ofs[id / RST_NR_PER_BANK];
+ u32 offset = rst_data->bank_ofs[id / RST_NR_PER_BANK];
+ void __iomem *addr = rst_data->base + offset;
+ bool inverted = false;
+ u32 val;
+
+ /* For PCIC reset logic is inverted, 0:assert 1:deassert */
+ if (offset == REG_NP_SCU_PCIC)
+ inverted = true;
- return !!(readl(addr) & BIT(id % RST_NR_PER_BANK));
+ val = readl(addr) & BIT(id % RST_NR_PER_BANK);
+ return inverted ? !val : !!val;
}
static int en7523_reset_xlate(struct reset_controller_dev *rcdev,
--
2.53.0
prev parent reply other threads:[~2026-07-23 19:01 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-23 19:01 [PATCH 1/2] dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT Christian Marangi
2026-07-23 19:01 ` Christian Marangi [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260723190133.22577-2-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=bmasney@redhat.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox