From: Rob Herring <robh@kernel.org>
To: Bhargav Joshi <j.bhargav.u@gmail.com>
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney@redhat.com>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Peter Ujfalusi <peter.ujfalusi@ti.com>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, goledhruva@gmail.com,
m-chawdhry@ti.com, daniel.baluta@gmail.com, simona.toaca@nxp.com
Subject: Re: [PATCH 2/2] dt-bindings: clock: ti,dra7-atl: convert to dt-schema
Date: Fri, 14 Aug 2026 14:54:40 -0500 [thread overview]
Message-ID: <20260814195440.GA2792097-robh@kernel.org> (raw)
In-Reply-To: <20260813-ti-dra7-atl-v1-2-27b691f4cdcf@gmail.com>
On Thu, Aug 13, 2026 at 12:41:18AM +0530, Bhargav Joshi wrote:
> Convert the IP driver portion of the DRA7 ATL (Audio Tracking Logic)
> binding from the freeform text binding to dt-schema. Together with
> ti,dra7-atl-clock.yaml this fully replaces dra7-atl.txt.
>
> ti,hwmods is marked deprecated as modern DTS uses ti,sysc target-module
> wrappers and the property is absent from current dra7-l4.dtsi.
>
> bws/aws maximum set to 15 per the 16 mux sources in
> dt-bindings/clock/ti-dra7-atl.h.
>
> Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
> ---
> .../devicetree/bindings/clock/ti/dra7-atl.txt | 56 -------------
> .../devicetree/bindings/clock/ti/ti,dra7-atl.yaml | 98 ++++++++++++++++++++++
> 2 files changed, 98 insertions(+), 56 deletions(-)
> diff --git a/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml b/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml
> new file mode 100644
> index 000000000000..5460432219a5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/ti/ti,dra7-atl.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/ti/ti,dra7-atl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TI DRA7 ATL (Audio Tracking Logic) Clock Controller
> +
> +maintainers:
> + - Peter Ujfalusi <peter.ujfalusi@ti.com>
> +
> +description:
> + The ATL IP is used to generate clock to be used to synchronize baseband and
> + audio codec. A single ATL IP provides four ATL clock instances sharing the
> + same functional clock but can be configured to provide different clocks.
> + ATL can maintain a clock averages to some desired frequency based on the
> + bws/aws signals - can compensate the drift between the two ws signal.
> +
> + See also Documentation/devicetree/bindings/clock/ti/ti,dra7-atl-clock.yaml
> +
> +properties:
> + compatible:
> + const: ti,dra7-atl
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: fck
> +
> + ti,provided-clocks:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + minItems: 4
> + maxItems: 4
As the phandles have no arg cells:
items:
maxItems: 1
With that,
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
prev parent reply other threads:[~2026-08-14 19:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-12 19:11 [PATCH 0/2] dt-bindings: clock: ti,dra7-atl: convert to dt-schema Bhargav Joshi
2026-08-12 19:11 ` [PATCH 1/2] dt-bindings: clock: ti,dra7-atl-clock: convert to DT schema Bhargav Joshi
2026-08-14 19:50 ` Rob Herring (Arm)
2026-08-12 19:11 ` [PATCH 2/2] dt-bindings: clock: ti,dra7-atl: convert to dt-schema Bhargav Joshi
2026-08-14 19:54 ` Rob Herring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260814195440.GA2792097-robh@kernel.org \
--to=robh@kernel.org \
--cc=bmasney@redhat.com \
--cc=conor+dt@kernel.org \
--cc=daniel.baluta@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=goledhruva@gmail.com \
--cc=j.bhargav.u@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=m-chawdhry@ti.com \
--cc=mturquette@baylibre.com \
--cc=peter.ujfalusi@ti.com \
--cc=sboyd@kernel.org \
--cc=simona.toaca@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox