From: Jisheng Zhang <jszhang@kernel.org>
To: Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Stephen Boyd <sboyd@kernel.org>,
Brian Masney <bmasney+clk@redhat.com>,
Jerome Brunet <jbrunet+clk@baylibre.com>,
Linus Walleij <linusw@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org,
linux-gpio@vger.kernel.org
Subject: [PATCH v2 07/13] reset: add Synaptics SL2610 reset controller support
Date: Sun, 15 Nov 2026 18:23:46 +0800 [thread overview]
Message-ID: <20261115102401.3520-8-jszhang@kernel.org> (raw)
In-Reply-To: <20261115102401.3520-1-jszhang@kernel.org>
Support the SoC and MCU reset controls exposed by the SL2610 system
controllers. Match the MFD-created platform devices, use the parent
syscon regmap and register each reset provider against the parent DT node.
Handle both pulse resets and sticky resets with assert/deassert controls.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
---
MAINTAINERS | 1 +
drivers/reset/Kconfig | 13 ++
drivers/reset/Makefile | 1 +
drivers/reset/reset-sl2610.c | 224 +++++++++++++++++++++++++++++++++++
4 files changed, 239 insertions(+)
create mode 100644 drivers/reset/reset-sl2610.c
diff --git a/MAINTAINERS b/MAINTAINERS
index eae1493485ee..1bd3b2f39865 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3812,6 +3812,7 @@ F: Documentation/devicetree/bindings/soc/synaptics/
F: arch/arm/boot/dts/synaptics/
F: arch/arm/mach-berlin/
F: arch/arm64/boot/dts/synaptics/
+F: drivers/reset/reset-sl2610.c
F: drivers/soc/synaptics/
F: include/dt-bindings/clock/syna,sl2610.h
F: include/dt-bindings/reset/syna,sl2610-reset.h
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index eda9c698a95f..98e973a8798c 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -358,6 +358,19 @@ config RESET_SUNXI
help
This enables the reset driver for Allwinner SoCs.
+config RESET_SL2610
+ tristate "Synaptics SL2610 Reset Driver"
+ depends on ARCH_BERLIN || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ select SOC_SL2610_SYSCON
+ help
+ Support the reset controllers in the SoC and MCU system control
+ blocks of Synaptics SL2610 SoCs. Both pulse and sticky reset lines
+ are supported.
+
+ To compile this driver as a module, choose M here. The module will
+ be called reset-sl2610.
+
config RESET_TENSTORRENT_ATLANTIS
tristate "Tenstorrent atlantis reset driver"
depends on ARCH_TENSTORRENT || COMPILE_TEST
diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile
index 489fafd6bbe3..d28276a4f2ea 100644
--- a/drivers/reset/Makefile
+++ b/drivers/reset/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_RESET_SCMI) += reset-scmi.o
obj-$(CONFIG_RESET_SIMPLE) += reset-simple.o
obj-$(CONFIG_RESET_SKY1) += reset-sky1.o
obj-$(CONFIG_RESET_SKY1_AUDSS) += reset-sky1-audss.o
+obj-$(CONFIG_RESET_SL2610) += reset-sl2610.o
obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
obj-$(CONFIG_RESET_SUNPLUS) += reset-sunplus.o
obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
diff --git a/drivers/reset/reset-sl2610.c b/drivers/reset/reset-sl2610.c
new file mode 100644
index 000000000000..1ca58d5a3e71
--- /dev/null
+++ b/drivers/reset/reset-sl2610.c
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2026 Synaptics Incorporated
+ *
+ * Synaptics SL2610 reset driver
+ *
+ * Author: Jisheng Zhang <jszhang@kernel.org>
+ */
+
+#include <dt-bindings/reset/syna,sl2610-reset.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/* SL2610 ACPU subsystem */
+#define SL2610_GBL_PERIFRESET 0x350
+#define SL2610_GBL_PERIFSTICKYRESET 0x360
+#define SL2610_GBL_APBPERIFRESET 0x370
+#define SL2610_GBL_TOPSTICKYRESET 0x378
+#define SL2610_GBL_AVIOSTICKYRESET 0x37c
+
+/* SL2610 system subsystem */
+#define SL2610_SMGBL_STICKYRST0 0x400
+
+#define to_sl2610_reset_priv(p) container_of((p), struct sl2610_reset_priv, rcdev)
+
+#define SL2610_RESET(id, reg, bit, sticky)[id] = { reg, BIT(bit), sticky }
+
+struct sl2610_reset_cfg {
+ u32 reg;
+ u32 bit;
+ bool sticky;
+};
+
+struct sl2610_reset_data {
+ const struct sl2610_reset_cfg *cfgs;
+ size_t num;
+};
+
+struct sl2610_reset_priv {
+ struct regmap *regmap;
+ const struct sl2610_reset_cfg *cfgs;
+ struct reset_controller_dev rcdev;
+};
+
+static const struct sl2610_reset_cfg sl2610_reset_cfgs[] = {
+ SL2610_RESET(RST_SOC_SDIO0, SL2610_GBL_PERIFRESET, 2, false),
+ SL2610_RESET(RST_SOC_USB0, SL2610_GBL_PERIFRESET, 4, false),
+ SL2610_RESET(RST_SOC_EMMC, SL2610_GBL_PERIFRESET, 5, false),
+ SL2610_RESET(RST_SOC_GETH0, SL2610_GBL_PERIFRESET, 6, false),
+ SL2610_RESET(RST_SOC_SDIO1, SL2610_GBL_PERIFRESET, 7, false),
+ SL2610_RESET(RST_SOC_USB1, SL2610_GBL_PERIFRESET, 8, false),
+ SL2610_RESET(RST_SOC_GETH1, SL2610_GBL_PERIFRESET, 9, false),
+ SL2610_RESET(RST_SOC_USB0PHY, SL2610_GBL_PERIFSTICKYRESET, 0, true),
+ SL2610_RESET(RST_SOC_USB0CORE, SL2610_GBL_PERIFSTICKYRESET, 1, true),
+ SL2610_RESET(RST_SOC_USB0MAHB, SL2610_GBL_PERIFSTICKYRESET, 2, true),
+ SL2610_RESET(RST_SOC_USB1PHY, SL2610_GBL_PERIFSTICKYRESET, 3, true),
+ SL2610_RESET(RST_SOC_USB1CORE, SL2610_GBL_PERIFSTICKYRESET, 4, true),
+ SL2610_RESET(RST_SOC_USB1MAHB, SL2610_GBL_PERIFSTICKYRESET, 5, true),
+ SL2610_RESET(RST_SOC_UART0, SL2610_GBL_APBPERIFRESET, 0, false),
+ SL2610_RESET(RST_SOC_UART1, SL2610_GBL_APBPERIFRESET, 1, false),
+ SL2610_RESET(RST_SOC_UART2, SL2610_GBL_APBPERIFRESET, 2, false),
+ SL2610_RESET(RST_SOC_UART3, SL2610_GBL_APBPERIFRESET, 3, false),
+ SL2610_RESET(RST_SOC_I2C0, SL2610_GBL_APBPERIFRESET, 4, false),
+ SL2610_RESET(RST_SOC_I2C1, SL2610_GBL_APBPERIFRESET, 5, false),
+ SL2610_RESET(RST_SOC_SPI0, SL2610_GBL_APBPERIFRESET, 6, false),
+ SL2610_RESET(RST_SOC_SPI1, SL2610_GBL_APBPERIFRESET, 7, false),
+ SL2610_RESET(RST_SOC_SPI2, SL2610_GBL_APBPERIFRESET, 8, false),
+ SL2610_RESET(RST_SOC_SPI3, SL2610_GBL_APBPERIFRESET, 9, false),
+ SL2610_RESET(RST_SOC_APBTIMERS, SL2610_GBL_APBPERIFRESET, 10, false),
+ SL2610_RESET(RST_SOC_APBSYSCNT, SL2610_GBL_APBPERIFRESET, 11, false),
+ SL2610_RESET(RST_SOC_APBWDT, SL2610_GBL_APBPERIFRESET, 12, false),
+ SL2610_RESET(RST_SOC_APBGPIO, SL2610_GBL_APBPERIFRESET, 13, false),
+ SL2610_RESET(RST_SOC_APBDMA, SL2610_GBL_APBPERIFRESET, 14, false),
+ SL2610_RESET(RST_SOC_GPUCORE, SL2610_GBL_TOPSTICKYRESET, 0, true),
+ SL2610_RESET(RST_SOC_NPUCORE, SL2610_GBL_TOPSTICKYRESET, 1, true),
+ SL2610_RESET(RST_SOC_AVIOAIOG, SL2610_GBL_AVIOSTICKYRESET, 0, true),
+ SL2610_RESET(RST_SOC_AVIOVPPG, SL2610_GBL_AVIOSTICKYRESET, 1, true),
+ SL2610_RESET(RST_SOC_AVIOVIPG, SL2610_GBL_AVIOSTICKYRESET, 2, true),
+};
+
+static const struct sl2610_reset_cfg sl2610_system_reset_cfgs[] = {
+ SL2610_RESET(RST_SM_ADCCORE, SL2610_SMGBL_STICKYRST0, 0, true),
+ SL2610_RESET(RST_SM_ADCPRST, SL2610_SMGBL_STICKYRST0, 1, true),
+ SL2610_RESET(RST_SM_CAN0PRST, SL2610_SMGBL_STICKYRST0, 2, true),
+ SL2610_RESET(RST_SM_CAN0SRST, SL2610_SMGBL_STICKYRST0, 3, true),
+ SL2610_RESET(RST_SM_CAN1PRST, SL2610_SMGBL_STICKYRST0, 4, true),
+ SL2610_RESET(RST_SM_CAN1SRST, SL2610_SMGBL_STICKYRST0, 5, true),
+ SL2610_RESET(RST_SM_GPIOPRST, SL2610_SMGBL_STICKYRST0, 6, true),
+ SL2610_RESET(RST_SM_GPIOSRST, SL2610_SMGBL_STICKYRST0, 7, true),
+ SL2610_RESET(RST_SM_I2CM0PRST, SL2610_SMGBL_STICKYRST0, 8, true),
+ SL2610_RESET(RST_SM_I2CM0SRST, SL2610_SMGBL_STICKYRST0, 9, true),
+ SL2610_RESET(RST_SM_I2CM1PRST, SL2610_SMGBL_STICKYRST0, 10, true),
+ SL2610_RESET(RST_SM_I2CM1SRST, SL2610_SMGBL_STICKYRST0, 11, true),
+ SL2610_RESET(RST_SM_I3CPRST, SL2610_SMGBL_STICKYRST0, 12, true),
+ SL2610_RESET(RST_SM_I3CSRST, SL2610_SMGBL_STICKYRST0, 13, true),
+ SL2610_RESET(RST_SM_PDMPRST, SL2610_SMGBL_STICKYRST0, 14, true),
+ SL2610_RESET(RST_SM_PDMSRST, SL2610_SMGBL_STICKYRST0, 15, true),
+ SL2610_RESET(RST_SM_PVTHSRST, SL2610_SMGBL_STICKYRST0, 16, true),
+ SL2610_RESET(RST_SM_PVTPRST, SL2610_SMGBL_STICKYRST0, 17, true),
+ SL2610_RESET(RST_SM_PWMPERIRST, SL2610_SMGBL_STICKYRST0, 18, true),
+ SL2610_RESET(RST_SM_PWMPRST, SL2610_SMGBL_STICKYRST0, 19, true),
+ SL2610_RESET(RST_SM_SPIMPRST, SL2610_SMGBL_STICKYRST0, 20, true),
+ SL2610_RESET(RST_SM_SPIMSRST, SL2610_SMGBL_STICKYRST0, 21, true),
+ SL2610_RESET(RST_SM_SPISPRST, SL2610_SMGBL_STICKYRST0, 22, true),
+ SL2610_RESET(RST_SM_SPISSRST, SL2610_SMGBL_STICKYRST0, 23, true),
+ SL2610_RESET(RST_SM_UART0PRST, SL2610_SMGBL_STICKYRST0, 24, true),
+ SL2610_RESET(RST_SM_UART0SRST, SL2610_SMGBL_STICKYRST0, 25, true),
+ SL2610_RESET(RST_SM_UART1PRST, SL2610_SMGBL_STICKYRST0, 26, true),
+ SL2610_RESET(RST_SM_UART1SRST, SL2610_SMGBL_STICKYRST0, 27, true),
+ SL2610_RESET(RST_SM_UART2PRST, SL2610_SMGBL_STICKYRST0, 28, true),
+ SL2610_RESET(RST_SM_UART2SRST, SL2610_SMGBL_STICKYRST0, 29, true),
+ SL2610_RESET(RST_SM_UART3PRST, SL2610_SMGBL_STICKYRST0, 30, true),
+ SL2610_RESET(RST_SM_UART3SRST, SL2610_SMGBL_STICKYRST0, 31, true),
+};
+
+static const struct sl2610_reset_data sl2610_reset_data = {
+ .cfgs = sl2610_reset_cfgs,
+ .num = ARRAY_SIZE(sl2610_reset_cfgs),
+};
+
+static const struct sl2610_reset_data sl2610_system_reset_data = {
+ .cfgs = sl2610_system_reset_cfgs,
+ .num = ARRAY_SIZE(sl2610_system_reset_cfgs),
+};
+
+static int sl2610_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sl2610_reset_priv *priv = to_sl2610_reset_priv(rcdev);
+ const struct sl2610_reset_cfg *cfg = &priv->cfgs[id];
+
+ if (!cfg->sticky)
+ return -EINVAL;
+
+ return regmap_clear_bits(priv->regmap, cfg->reg, cfg->bit);
+}
+
+static int sl2610_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sl2610_reset_priv *priv = to_sl2610_reset_priv(rcdev);
+ const struct sl2610_reset_cfg *cfg = &priv->cfgs[id];
+
+ if (!cfg->sticky)
+ return -EINVAL;
+
+ return regmap_set_bits(priv->regmap, cfg->reg, cfg->bit);
+}
+
+static int sl2610_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct sl2610_reset_priv *priv = to_sl2610_reset_priv(rcdev);
+ const struct sl2610_reset_cfg *cfg = &priv->cfgs[id];
+
+ if (cfg->sticky) {
+ regmap_clear_bits(priv->regmap, cfg->reg, cfg->bit);
+ usleep_range(10, 15);
+ return regmap_set_bits(priv->regmap, cfg->reg, cfg->bit);
+ }
+
+ return regmap_set_bits(priv->regmap, cfg->reg, cfg->bit);
+}
+
+static const struct reset_control_ops sl2610_reset_ops = {
+ .reset = sl2610_reset_reset,
+ .assert = sl2610_reset_assert,
+ .deassert = sl2610_reset_deassert,
+};
+
+static int sl2610_reset_probe(struct platform_device *pdev)
+{
+ struct device_node *parent_np = pdev->dev.parent->of_node;
+ struct sl2610_reset_priv *priv;
+ const struct sl2610_reset_data *data =
+ (void *)platform_get_device_id(pdev)->driver_data;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->regmap = syscon_node_to_regmap(parent_np);
+ if (IS_ERR(priv->regmap))
+ return PTR_ERR(priv->regmap);
+
+ priv->rcdev.owner = THIS_MODULE;
+ priv->rcdev.ops = &sl2610_reset_ops;
+ priv->rcdev.dev = &pdev->dev;
+ priv->rcdev.of_node = parent_np;
+ priv->rcdev.of_reset_n_cells = 1;
+ priv->rcdev.nr_resets = data->num;
+ priv->cfgs = data->cfgs;
+
+ return devm_reset_controller_register(&pdev->dev, &priv->rcdev);
+}
+
+static const struct platform_device_id sl2610_reset_ids[] = {
+ { "sl2610-soc-reset", (kernel_ulong_t)&sl2610_reset_data },
+ { "sl2610-mcu-reset", (kernel_ulong_t)&sl2610_system_reset_data },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, sl2610_reset_ids);
+
+static struct platform_driver sl2610_reset_driver = {
+ .probe = sl2610_reset_probe,
+ .id_table = sl2610_reset_ids,
+ .driver = {
+ .name = "sl2610-reset",
+ },
+};
+module_platform_driver(sl2610_reset_driver);
+
+MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
+MODULE_DESCRIPTION("Synaptics SL2610 reset controller");
+MODULE_LICENSE("GPL");
--
2.55.0
next prev parent reply other threads:[~2026-11-15 10:44 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-15 10:23 [PATCH v2 00/13] arm64: add Synaptics SL2610 SoCs and RDK boards Jisheng Zhang
2026-11-15 10:23 ` [PATCH v2 01/13] arm64: kconfig: let ARCH_BERLIN cover Synaptics arm64 SoCs Jisheng Zhang
2026-11-15 10:23 ` [PATCH v2 02/13] pinctrl: berlin: use u16 instead of u8 for the offset Jisheng Zhang
2026-11-15 10:23 ` [PATCH v2 03/13] pinctrl: berlin: enable module build support Jisheng Zhang
2026-11-15 10:58 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 04/13] pinctrl: berlin: add optional pinconf support Jisheng Zhang
2026-11-15 11:01 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 05/13] dt-bindings: soc: synaptics: add SL2610 system controllers Jisheng Zhang
2026-11-15 10:58 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 06/13] soc: synaptics: add SL2610 system controller support Jisheng Zhang
2026-11-15 10:56 ` sashiko-bot
2026-11-15 10:23 ` Jisheng Zhang [this message]
2026-11-15 11:12 ` [PATCH v2 07/13] reset: add Synaptics SL2610 reset " sashiko-bot
2026-11-15 10:23 ` [PATCH v2 08/13] pinctrl: berlin: add Synaptics SL2610 pin " Jisheng Zhang
2026-11-15 10:57 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 09/13] clk: berlin: add Synaptics clock controller helpers Jisheng Zhang
2026-11-15 11:05 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 10/13] clk: berlin: add Synaptics SL2610 clocks and PLLs Jisheng Zhang
2026-11-15 11:04 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 11/13] dt-bindings: arm: berlin: add Synaptics SL2610 SoCs and RDK boards Jisheng Zhang
2026-11-15 10:23 ` [PATCH v2 12/13] arm64: dts: synaptics: add SL2610 family SoCs Jisheng Zhang
2026-11-15 11:13 ` sashiko-bot
2026-11-15 10:23 ` [PATCH v2 13/13] arm64: dts: synaptics: add SL2610 family RDK boards Jisheng Zhang
2026-11-15 11:05 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20261115102401.3520-8-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=bmasney+clk@redhat.com \
--cc=catalin.marinas@arm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet+clk@baylibre.com \
--cc=krzk+dt@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=sboyd@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
--cc=will@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox