From: Alexander Stein <alexander.stein@ew.tq-group.com>
To: Tony Lindgren <tony@atomide.com>, linux-arm-kernel@lists.infradead.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-clk@vger.kernel.org,
Dmitry Osipenko <dmitry.osipenko@collabora.com>,
'Linux Samsung SOC' <linux-samsung-soc@vger.kernel.org>,
linux-amlogic@lists.infradead.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Maxime Ripard <maxime@cerno.tech>
Subject: Re: (EXT) Re: [PATCH v2 3/3] clk: Drop the rate range on clk_put
Date: Fri, 01 Apr 2022 13:55:20 +0200 [thread overview]
Message-ID: <2236051.ElGaqSPkdT@steina-w> (raw)
In-Reply-To: <20220331153134.h3alp24hzquajkly@houat>
Hello,
Am Donnerstag, 31. März 2022, 17:31:34 CEST schrieb Maxime Ripard:
> * PGP Signed by an unknown key
>
> Hi Tony,
>
> On Thu, Mar 31, 2022 at 06:00:42PM +0300, Tony Lindgren wrote:
> > * Maxime Ripard <maxime@cerno.tech> [220331 09:52]:
> > > On Thu, Mar 31, 2022 at 12:42:10PM +0300, Tony Lindgren wrote:
> > > > It seems the dts assigned-clock-parents no longer works now?
> > >
> > > That would make some kind of sense, __set_clk_parents calls clk_put on
> > > both the assigned clock and its parent.
> > >
> > > Could you see what parent (and why?) it tries to enforce then?
> >
> > It picks the other option available for the mux clock that only has
> > two options. No idea why, but if you have some debug patch in mind I
> > can give it a try.
> >
> > > It looks like the gpt1_fck driver might favor another parent for that
> > > rate, which, if it's an invalid configuration, shouldn't really happen?
> >
> > Hmm there's a gate clock and a mux clock, there's not really a rate
> > selection available here for the sources.
>
> If I followed the OMAP driver properly, clk_mux_determine_rate_flags is
> doing the heavy lifting, could you run your test with
I'm affected by this patch as well on an imx8mp platform (see [1] for some
details)
In the failing case with with your patch applied I get the following error
---
[ 0.661064] clk_set_rate_range_nolock: core req rate 500000000
[ 0.664084] clk_set_rate_range_nolock: clamped rate 500000000
[ 0.669851] clk_core_set_rate_nolock: rate 500000000
[ 0.674843] clk_core_set_rate_nolock: rounded rate 500000000
[ 0.680536] clk_set_rate_range_nolock: core req rate 800000000
[ 0.686389] clk_set_rate_range_nolock: clamped rate 800000000
[ 0.692164] clk_core_set_rate_nolock: rate 800000000
[ 0.697153] clk_mux_determine_rate_flags: requested rate 800000000
[ 0.703363] clk_mux_determine_rate_flags: current parent sys_pll1
[ 0.709487] clk_mux_determine_rate_flags: current parent rate 800000000
[ 0.716147] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[ 0.724977] Mem abort info:
[ 0.727775] ESR = 0x96000004
[ 0.730835] EC = 0x25: DABT (current EL), IL = 32 bits
[ 0.736177] SET = 0, FnV = 0
[ 0.739239] EA = 0, S1PTW = 0
[ 0.742382] FSC = 0x04: level 0 translation fault
[ 0.747287] Data abort info:
[ 0.750172] ISV = 0, ISS = 0x00000004
[ 0.754027] CM = 0, WnR = 0
[ 0.757002] [0000000000000000] user address but active_mm is swapper
[ 0.763394] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 0.768985] Modules linked in:
[ 0.772049] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.17.0-next-20220331+
#48 8e9d24095c7f6b15f85bc2ad57a5609e219130b9
[ 0.782984] Hardware name: TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL (DT)
[ 0.789985] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 0.796985] pc : clk_mux_determine_rate_flags+0x280/0x2cc
[ 0.802407] lr : clk_mux_determine_rate_flags+0xf4/0x2cc
[ 0.807747] sp : ffff800009ceb590
[ 0.811072] x29: ffff800009ceb590 x28: ffff800009ceb6a0 x27:
ffff800008eaa038
[ 0.818245] x26: ffff8000092fe0b0 x25: ffff000000090000 x24:
ffff000000090000
[ 0.825420] x23: 0000000000000000 x22: ffff800008ea95d8 x21:
ffff0000028f4700
[ 0.832595] x20: 000000002faf0800 x19: 0000000000000000 x18:
0000000000004590
[ 0.839770] x17: 0000000000004570 x16: 0000000000004560 x15:
ffff8000092ff250
[ 0.846945] x14: 0000000000000000 x13: 3030303030303030 x12:
3820657461722074
[ 0.854120] x11: 6e6572617020746e x10: 6572727563203a73 x9 :
7563203a7367616c
[ 0.861295] x8 : 665f657461725f65 x7 : 205d373834393037 x6 :
ffff800009a947c8
[ 0.868472] x5 : ffff800008eafe68 x4 : 0000000000000009 x3 :
000000002faf0800
[ 0.875645] x2 : ffff800008eafef4 x1 : ffff800008eaa038 x0 :
ffff8000092fd5b8
[ 0.882822] Call trace:
[ 0.885273] clk_mux_determine_rate_flags+0x280/0x2cc
[ 0.890347] clk_mux_determine_rate+0x10/0x20
[ 0.894720] clk_core_determine_round_nolock+0x4c/0xb4
[ 0.899882] clk_core_round_rate_nolock+0x30/0x80
[ 0.904607] clk_core_round_rate_nolock+0x70/0x80
[ 0.909334] clk_hw_round_rate+0x44/0x74
[ 0.913270] clk_factor_round_rate+0x60/0x80
[ 0.917557] clk_core_determine_round_nolock+0x88/0xb4
[ 0.922720] clk_core_round_rate_nolock+0x30/0x80
[ 0.927445] clk_core_set_rate_nolock.part.0+0xa4/0x1d0
[ 0.932695] clk_set_rate_range_nolock+0x234/0x244
[ 0.937507] __clk_put+0x60/0x12c
[ 0.940834] clk_put+0xc/0x1c
[ 0.943809] __set_clk_parents+0x12c/0x244
[ 0.947920] of_clk_set_defaults+0x20/0x50
[ 0.952032] of_clk_add_hw_provider.part.0+0x94/0x120
[ 0.957107] of_clk_add_hw_provider+0x10/0x20
[ 0.961482] imx8mp_clocks_probe+0x3458/0x34d0
[ 0.965945] platform_probe+0x64/0x100
[ 0.969707] call_driver_probe+0x28/0x130
[ 0.973732] really_probe+0x178/0x310
[ 0.977409] __driver_probe_device+0xfc/0x144
[ 0.981782] driver_probe_device+0x38/0x12c
[ 0.985982] __driver_attach+0xcc/0x220
[ 0.989834] bus_for_each_dev+0x6c/0xc0
[ 0.993682] driver_attach+0x20/0x2c
[ 0.997270] bus_add_driver+0x140/0x230
[ 1.001120] driver_register+0x74/0x120
[ 1.004970] __platform_driver_register+0x24/0x30
[ 1.009697] imx8mp_clk_driver_init+0x18/0x20
[ 1.014070] do_one_initcall+0x58/0x200
[ 1.017920] do_initcalls+0x164/0x19c
[ 1.021597] kernel_init_freeable+0x134/0x17c
[ 1.025970] kernel_init+0x2c/0x150
[ 1.029470] ret_from_fork+0x10/0x20
[ 1.033065] Code: f9000f94 912982c1 b0002900 9116e000 (f9400262)
[ 1.039188] ---[ end trace 0000000000000000 ]---
[ 1.043869] Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b
[ 1.051523] SMP: stopping secondary CPUs
[ 1.055467] Kernel Offset: disabled
[ 1.058960] CPU features: 0x000,00020009,00001082
[ 1.063684] Memory Limit: none
[ 1.066748] ---[ end Kernel panic - not syncing: Attempted to kill init!
exitcode=0x0000000b ]---
---
With the $subject patch reverted and bootable system:
---
[ 0.659922] clk_core_set_rate_nolock: rate 1000000000
[ 0.662154] clk_core_set_rate_nolock: rounded rate 1000000000
[ 0.667932] clk_core_set_rate_nolock: rate 800000000
[ 0.672918] clk_core_set_rate_nolock: rounded rate 800000000
[ 0.678601] clk_core_set_rate_nolock: rate 500000000
[ 0.683592] clk_core_set_rate_nolock: rounded rate 500000000
[ 0.689276] clk_core_set_rate_nolock: rate 400000000
[ 0.694267] clk_core_set_rate_nolock: rounded rate 400000000
[ 0.699980] clk_core_set_rate_nolock: rate 800000000
[ 0.704942] clk_core_set_rate_nolock: rounded rate 800000000
[ 0.710627] clk_core_set_rate_nolock: rate 393216000
[ 0.715611] clk_core_set_rate_nolock: rounded rate 393216000
[ 0.721815] clk_core_set_rate_nolock: rate 361267200
[ 0.726284] clk_core_set_rate_nolock: rounded rate 361267200
[ 0.734097] clk_core_set_rate_nolock: rate 800000000
[ 0.736977] clk_core_set_rate_nolock: rounded rate 800000000
[ 0.742652] clk_core_set_rate_nolock: rate 400000000
[ 0.747645] clk_core_set_rate_nolock: rounded rate 400000000
[ 0.754565] clk_core_set_rate_nolock: rate 500000000
[ 0.758331] clk_core_set_rate_nolock: rounded rate 500000000
[ 0.764688] SoC: i.MX8MP revision 1.1
[ 0.767931] clk_core_set_rate_nolock: rate 500000000
[ 0.772675] clk_core_set_rate_nolock: rounded rate 500000000
[ 0.778354] clk_core_set_rate_nolock: rate 200000000
[ 0.783351] clk_core_set_rate_nolock: rounded rate 200000000
[ 0.793748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.798952] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 34,
base_baud = 5000000) is a IMX
[ 0.806527] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 35,
base_baud = 5000000) is a IMX
[ 0.815329] 30890000.serial: ttymxc1 at MMIO 0x30890000 (irq = 36,
base_baud = 5000000) is a IMX
[ 0.824176] 30a60000.serial: ttymxc3 at MMIO 0x30a60000 (irq = 43,
base_baud = 1500000) is a IMX
[ 0.832588] printk: console [ttymxc3] enabled
[ 0.832588] printk: console [ttymxc3] enabled
[ 0.841244] printk: bootconsole [ec_imx6q0] disabled
[ 0.841244] printk: bootconsole [ec_imx6q0] disabled
[ 0.857871] clk_core_set_rate_nolock: rate 80000000
[ 0.862796] clk_core_set_rate_nolock: rounded rate 80000000
[ 0.868469] clk_core_set_rate_nolock: rate 20000000
[ 0.873364] clk_core_set_rate_nolock: rounded rate 20000000
[ 0.879258] clk_core_set_rate_nolock: rate 80000000
[ 0.884154] clk_core_set_rate_nolock: rounded rate 80000000
[...]
---
The 500000000 and 800000000 look a bit like the assigned-clock-rates for
clock-controller@30380000 in arch/arm64/boot/dts/freescale/imx8mp.dtsi
If you need some more information, do not hesitate to ask
Best regards,
Alexander
[1] https://lore.kernel.org/all/1911426.usQuhbGJ8B@steina-w/
next prev parent reply other threads:[~2022-04-01 11:55 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-25 16:11 [PATCH v2 0/3] clk: Some Clock Range Fixes Maxime Ripard
2022-03-25 16:11 ` [PATCH v2 1/3] clk: Initialize orphan req_rate Maxime Ripard
2022-03-29 18:36 ` Stephen Boyd
2022-03-25 16:11 ` [PATCH v2 2/3] clk: test: Test clk_set_rate_range on orphan mux Maxime Ripard
2022-03-29 18:36 ` Stephen Boyd
2022-03-25 16:11 ` [PATCH v2 3/3] clk: Drop the rate range on clk_put Maxime Ripard
2022-03-29 18:36 ` Stephen Boyd
2022-03-30 8:06 ` Marek Szyprowski
2022-03-30 8:47 ` Maxime Ripard
2022-03-31 9:42 ` Tony Lindgren
2022-03-31 9:54 ` Maxime Ripard
2022-03-31 15:00 ` Tony Lindgren
2022-03-31 15:31 ` Maxime Ripard
2022-03-31 17:00 ` Tony Lindgren
2022-03-31 21:58 ` Stephen Boyd
2022-04-01 12:28 ` Maxime Ripard
2022-04-03 2:14 ` Stephen Boyd
2022-04-01 11:55 ` Alexander Stein [this message]
2022-04-01 12:27 ` (EXT) " Maxime Ripard
2022-04-01 12:59 ` (EXT) " Alexander Stein
2022-04-01 13:04 ` Maxime Ripard
2022-04-01 13:07 ` (EXT) " Alexander Stein
2022-04-01 13:34 ` Maxime Ripard
2022-04-01 13:49 ` (EXT) " Alexander Stein
2022-04-01 14:55 ` Maxime Ripard
2022-04-04 7:06 ` (EXT) " Alexander Stein
2022-04-04 7:27 ` Maxime Ripard
2022-04-04 10:54 ` (EXT) " Alexander Stein
2022-04-07 8:09 ` Maxime Ripard
2022-04-02 17:01 ` Maxime Ripard
2022-04-07 7:53 ` Maxime Ripard
2022-04-07 8:03 ` Tony Lindgren
2022-04-07 11:08 ` Tony Lindgren
2022-04-07 13:45 ` Maxime Ripard
2022-04-08 5:03 ` Tony Lindgren
2022-03-31 9:56 ` Marek Szyprowski
2022-03-31 10:19 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2236051.ElGaqSPkdT@steina-w \
--to=alexander.stein@ew.tq-group.com \
--cc=dmitry.osipenko@collabora.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=maxime@cerno.tech \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).