From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-ej1-f45.google.com (mail-ej1-f45.google.com [209.85.218.45]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 07A3B1EEA38; Thu, 20 Feb 2025 09:28:57 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.218.45 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1740043742; cv=none; b=cdp/N2h471GQGufqahbX6c93BdSQ/5ZCWC58Zow7vS0eD52wDno/B2ylR7/qPYewXj+A/kvn6Bdo8ARj9tlA8XkXbqxfW1IxsVYRgI7m7QendRMhYsr41vTqJ5yfMXwoDx8AFUMbfVHTtRoOZiL69qAQIBJzu/99PibdWR+LFEk= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1740043742; c=relaxed/simple; bh=8Sj13PsVcq8jkLFPFgbzwb3WCAkSzqg40Pn3FnrXvcU=; h=Content-Type:Mime-Version:Subject:From:In-Reply-To:Date:Cc: Message-Id:References:To; b=Kk8RHiexJUHTm4p4+oOuRRhJ7BlRtl6KpSt6e//fM9YoV7+2ev56UzknmJRGbqE3VctoGcPZZcM4FZL3BTDyV7UP7C0MZtZyrlnmOI/Fkovx6ic/XHrACK2rBL6/S5hdLm3YOOorHXtv+prtJJA3XaoLvjCyvhNvuoBnlU7+pgo= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=VvRDCG6L; arc=none smtp.client-ip=209.85.218.45 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="VvRDCG6L" Received: by mail-ej1-f45.google.com with SMTP id a640c23a62f3a-ab7430e27b2so127899866b.3; Thu, 20 Feb 2025 01:28:57 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20230601; t=1740043736; x=1740648536; darn=vger.kernel.org; h=to:references:message-id:content-transfer-encoding:cc:date :in-reply-to:from:subject:mime-version:from:to:cc:subject:date :message-id:reply-to; bh=nvyi7VvzltIlH7aGuH+6yAwCC73kjj4nds79lOr48wU=; b=VvRDCG6Lsl7p2tqH8ufbne5iyE3hY9HHfwLMXVgMhvLcRUcQHDJTWQ+ZxNGt55dK2T dRh6aCHnLO6n1EDhJ09azXaLbLcBIGO/98B3ZUzzhNTMWzL6uCic0U2ECvF/xz0cnq3w BKFfaIeoVny4NgSrDDIsLxbSzWLsnEGDRY/k4VdxkdEHiIjMiVCiv3nfcJyMGZmJWzLQ 2Qf/SSwC89+GwtDYz6cNMDUSq15ucnLgh5kDMYx0dzXPAnTOT+wfQ32RcpjPkylF/oFb wgKlrTKbsFwWGpEdG4Z00L6gfQqFcWGOXe2drK5VbPgoe+g+9mRTd7dUqegf06FXmGvQ sxjg== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1740043736; x=1740648536; h=to:references:message-id:content-transfer-encoding:cc:date :in-reply-to:from:subject:mime-version:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=nvyi7VvzltIlH7aGuH+6yAwCC73kjj4nds79lOr48wU=; b=Dl8xxtmMEsM1+nKWyxY8bHP+lqerFkDENd23BD5SR9QOdG7uEyBQ2b6UgHCr/8K3c0 XqCMCcla4IUYDJ/IPGC1+u58GTiEo0Rl+njItd+q1rP0yDgjTGKixwFJICb+IjUxOsDQ ULYpmCqlGaVIxQEnt73jNWdAZ3SQ4ujkeM1Ydag/uuUCiSZXVCiNpzcqbeELYuIX8lio dUQK4yO0wguMaqDkKslnv5QvfqSa5T7eU1Rb+HwEdtjxal45m6GBfTlQQR+C8CTFAkON XPZMguxfuC7+yEuN63iC6OVIftkJqQgg3szaasKiwEnaYj3tjRfsBuxEhYbslHbZFRk5 dIUw== X-Forwarded-Encrypted: i=1; AJvYcCUFeT6EBvR7qOQoZ2b5vhJsOw7JZOUIARp/HkfLooofGnOMd9O9chJcPocWSybk4KO+6kCQjlEvShI=@vger.kernel.org, AJvYcCUKP5Q3NQZiHOVb5Q7TPglgsgtPf8kRy8DXAWbZptkHd8jVvOi9iUT9GqGxH78STGpP+a8lR+EesLmI8Y0b@vger.kernel.org, AJvYcCUUMDLQcEBbQf3EtBRi36GXVl1wc061xpyJFQW5im4T0FFw6JATEnNUtK3TAD0sds96HjI8TX+KA2jr@vger.kernel.org, AJvYcCV3a2nDS35cLDwiBvWEELopNHDfxpxW/mC0Zy3dfl97Sq7D/LgUB4OI9a9iP518oRlG1aETgoIqNt8T@vger.kernel.org, AJvYcCWDqWECXxwqtkx9rX8h3cekQDoR4H142Y0bdyd3ZFPbqe3Nfj75kouq++NXFkXXNLJ7cfNVCks1q8NPag==@vger.kernel.org X-Gm-Message-State: AOJu0YytC+Q+E+BkClzZRe0mpAaWojBqP+UCUHo0BuHTsJBs/4jzLTKQ cf/JG0wYUxk+47HIrWI9UIovr7V/0cIR/MskaqaavcCBS3jlkZ2l X-Gm-Gg: ASbGncsazykVAZfi3FNjq4I6AFW1eRlyQRQmdPu7/amxoQIZLe8HB1paNFltsweU4Jd x8wi2rx6FL4xaWECFn9dPCvkoRnyM5sRIHOj/QXrGyea9/qnvqKxMa7TsWGLGBrNJfp+w0RVWF3 U60qw9dFNhfoUTvSShFFgmXhSVIDZSW9BwkqP/ruHbNLY7MIoRPwWPAI4vgosPNqz/aPI25AoU+ 5F0WNti+REuwvIzAiLtwBy0+yrWG/Kj44RShJ6lZks+cx7nwTn+VEXDJPTlIZYqR4a8ZEtOVmjm yTmKesOUFS7AkdmtrrLEpMURIo/Zcv1MkEmGVZ2/kiBH+CzTznE1Gw== X-Google-Smtp-Source: AGHT+IHRKdaXMW0oK8vNEIXxjpEWtqL/IxIPAhrss+XmmFkg1ekBATfxAV05vke+3QmCMpG/DHBGWA== X-Received: by 2002:a17:907:890:b0:abb:d04c:6947 with SMTP id a640c23a62f3a-abbd04ce345mr465819066b.8.1740043735744; Thu, 20 Feb 2025 01:28:55 -0800 (PST) Received: from smtpclient.apple (185.174.17.62.zt.hu. [185.174.17.62]) by smtp.gmail.com with ESMTPSA id a640c23a62f3a-abba4b9ee98sm649592166b.167.2025.02.20.01.28.53 (version=TLS1_2 cipher=ECDHE-ECDSA-AES128-GCM-SHA256 bits=128/128); Thu, 20 Feb 2025 01:28:55 -0800 (PST) Content-Type: text/plain; charset=utf-8 Precedence: bulk X-Mailing-List: linux-clk@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Mime-Version: 1.0 (Mac OS X Mail 16.0 \(3776.700.51\)) Subject: Re: [PATCH v2 04/10] clk: sunxi-ng: add CCU drivers for V853 From: =?utf-8?B?QW5kcsOhcyBTemVtesWR?= In-Reply-To: <3596612.V25eIC5XRa@jernej-laptop> Date: Thu, 20 Feb 2025 10:28:43 +0100 Cc: Michael Turquette , Stephen Boyd , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Chen-Yu Tsai , Samuel Holland , Linus Walleij , Philipp Zabel , Maxime Ripard , Vinod Koul , Kishon Vijay Abraham I , Ulf Hansson , Paul Walmsley , Palmer Dabbelt , Albert Ou , =?utf-8?Q?Uwe_Kleine-K=C3=B6nig?= , Florian Fainelli , linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev, linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org, linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org, linux-riscv@lists.infradead.org Content-Transfer-Encoding: quoted-printable Message-Id: <25D5F3C6-47BB-44B1-9FE3-12B6B8F5F901@gmail.com> References: <20250205125225.1152849-1-szemzo.andras@gmail.com> <20250205125225.1152849-5-szemzo.andras@gmail.com> <3596612.V25eIC5XRa@jernej-laptop> To: =?utf-8?Q?Jernej_=C5=A0krabec?= X-Mailer: Apple Mail (2.3776.700.51) Hi, Thanks for your review! > On 19 Feb 2025, at 21:21, Jernej =C5=A0krabec = wrote: >=20 > Dne sreda, 5. februar 2025 ob 13:52:19 Srednjeevropski standardni =C4=8D= as je Andras Szemzo napisal(a): >> V853 has similar gates/resets like existing Allwinner SOCs. Add = support for it's CCU and PRCM CCU. >>=20 >> Signed-off-by: Andras Szemzo >> --- >> drivers/clk/sunxi-ng/Kconfig | 10 + >> drivers/clk/sunxi-ng/Makefile | 4 + >> drivers/clk/sunxi-ng/ccu-sun8i-v853-r.c | 120 +++ >> drivers/clk/sunxi-ng/ccu-sun8i-v853-r.h | 14 + >> drivers/clk/sunxi-ng/ccu-sun8i-v853.c | 1145 = +++++++++++++++++++++++ >> drivers/clk/sunxi-ng/ccu-sun8i-v853.h | 14 + >> 6 files changed, 1307 insertions(+) >> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v853-r.c >> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v853-r.h >> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v853.c >> create mode 100644 drivers/clk/sunxi-ng/ccu-sun8i-v853.h >>=20 >> diff --git a/drivers/clk/sunxi-ng/Kconfig = b/drivers/clk/sunxi-ng/Kconfig >> index b547198a2c65..e257373177e0 100644 >> --- a/drivers/clk/sunxi-ng/Kconfig >> +++ b/drivers/clk/sunxi-ng/Kconfig >> @@ -12,6 +12,16 @@ config SUNIV_F1C100S_CCU >> default y >> depends on MACH_SUNIV || COMPILE_TEST >>=20 >> +config SUN8I_V853_CCU >> + tristate "Support for the Allwinner V853/V851s/V851SE CCU" >> + default MACH_SUN8I >> + depends on MACH_SUN8I || COMPILE_TEST >> + >> +config SUN8I_V853_R_CCU >> + tristate "Support for the Allwinner V853/V851s/V851SE PRCM CCU" >> + default MACH_SUN8I >> + depends on MACH_SUN8I || COMPILE_TEST >=20 > Generally, this are two patches, one for each driver. >=20 >> + >> config SUN20I_D1_CCU >> tristate "Support for the Allwinner D1/R528/T113 CCU" >> default y >> diff --git a/drivers/clk/sunxi-ng/Makefile = b/drivers/clk/sunxi-ng/Makefile >> index 6b3ae2b620db..b87928462e15 100644 >> --- a/drivers/clk/sunxi-ng/Makefile >> +++ b/drivers/clk/sunxi-ng/Makefile >> @@ -25,6 +25,8 @@ sunxi-ccu-y +=3D ccu_mp.o >>=20 >> # SoC support >> obj-$(CONFIG_SUNIV_F1C100S_CCU) +=3D suniv-f1c100s-ccu.o >> +obj-$(CONFIG_SUN8I_V853_CCU) +=3D sun8i-v853-ccu.o >> +obj-$(CONFIG_SUN8I_V853_R_CCU) +=3D sun8i-v853-r-ccu.o >=20 > Put it to other sun8i drivers. >=20 >> obj-$(CONFIG_SUN20I_D1_CCU) +=3D sun20i-d1-ccu.o >> obj-$(CONFIG_SUN20I_D1_R_CCU) +=3D sun20i-d1-r-ccu.o >> obj-$(CONFIG_SUN50I_A64_CCU) +=3D sun50i-a64-ccu.o >> @@ -50,6 +52,8 @@ obj-$(CONFIG_SUN9I_A80_CCU) +=3D sun9i-a80-de-ccu.o >> obj-$(CONFIG_SUN9I_A80_CCU) +=3D sun9i-a80-usb-ccu.o >>=20 >> suniv-f1c100s-ccu-y +=3D ccu-suniv-f1c100s.o >> +sun8i-v853-ccu-y +=3D ccu-sun8i-v853.o >> +sun8i-v853-r-ccu-y +=3D ccu-sun8i-v853-r.o >=20 > Ditto. >=20 ok >> sun20i-d1-ccu-y +=3D ccu-sun20i-d1.o >> sun20i-d1-r-ccu-y +=3D ccu-sun20i-d1-r.o >> sun50i-a64-ccu-y +=3D ccu-sun50i-a64.o >> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v853-r.c = b/drivers/clk/sunxi-ng/ccu-sun8i-v853-r.c >> new file mode 100644 >> index 000000000000..bd60e00cda7f >> --- /dev/null >> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-v853-r.c >> @@ -0,0 +1,120 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (C) 2025 Andras Szemzo >> + * >> + * Based on ccu-sun20i-d1-r.c by Samuel Holland. >> + */ >> + >> +#include >> +#include >> +#include >> + >> +#include "ccu_common.h" >> +#include "ccu_reset.h" >> + >> +#include "ccu_gate.h" >> +#include "ccu_mp.h" >> + >> +#include "ccu-sun8i-v853-r.h" >> + >> +static const struct clk_parent_data r_ahb_apb0_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .fw_name =3D "losc" }, >> + { .fw_name =3D "iosc" }, >> + { .fw_name =3D "pll-periph" }, >> + { .fw_name =3D "pll-audio" } >> +}; >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX(r_ahb_clk, "r-ahb", >> + r_ahb_apb0_parents, 0x000, >> + 0, 5, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + 0); >> +static const struct clk_hw *r_ahb_hw =3D &r_ahb_clk.common.hw; >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX(r_apb0_clk, "r-apb0", >> + r_ahb_apb0_parents, 0x00c, >> + 0, 5, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + 0); >> +static const struct clk_hw *r_apb0_hw =3D &r_apb0_clk.common.hw; >=20 > Where can I look for above clocks? There are not described in BSP = driver. >=20 As the original BSP=E2=80=99s PRCM driver has an unacceptable licence, I = had to rewrite this driver. This IP block isn=E2=80=99t documented in the V853 manual, so as Andre suggested, I = used the A523 manual, and the D1/T113 PRCM driver. Than I peek/poke the registers to check if it=E2=80=99s = valid or not.=20 awboot> read32 0x701000c 0x0701000c: 0x0f00031f awboot> read32 0x7010000 0x07010000: 0x00000000 awboot> write32 0x7010000 0xffffffff awboot> read32 0x7010000 0x07010000: 0x0700031f They are there, I=E2=80=99m not sure about it=E2=80=99s usage. >> + >> +static SUNXI_CCU_GATE_HWS(bus_r_twd_clk, "bus-r-twd", &r_apb0_hw,=20 >> + 0x12c, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_r_ppu_clk, "bus-r-ppu", &r_apb0_hw, >> + 0x1ac, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_r_rtc_clk, "bus-r-rtc", &r_ahb_hw, >> + 0x20c, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_r_cpucfg_clk, "bus-r-cpucfg", = &r_apb0_hw, >> + 0x22c, BIT(0), 0); >> + >> +static struct ccu_common *sun8i_v853_r_ccu_clks[] =3D { >> + &r_ahb_clk.common, >> + &r_apb0_clk.common, >> + &bus_r_twd_clk.common, >> + &bus_r_ppu_clk.common, >> + &bus_r_rtc_clk.common, >> + &bus_r_cpucfg_clk.common, >> +}; >> + >> +static struct clk_hw_onecell_data sun8i_v853_r_hw_clks =3D { >> + .num =3D CLK_NUMBER, >> + .hws =3D { >> + [CLK_R_AHB] =3D &r_ahb_clk.common.hw, >> + [CLK_R_APB0] =3D &r_apb0_clk.common.hw, >> + [CLK_BUS_R_TWD] =3D &bus_r_twd_clk.common.hw, >> + [CLK_BUS_R_PPU] =3D &bus_r_ppu_clk.common.hw, >> + [CLK_BUS_R_RTC] =3D &bus_r_rtc_clk.common.hw, >> + [CLK_BUS_R_CPUCFG] =3D &bus_r_cpucfg_clk.common.hw, >> + }, >> +}; >> + >> +static const struct ccu_reset_map sun8i_v853_r_ccu_resets[] =3D { >> + [RST_BUS_R_TWD] =3D { 0x12c, BIT(16) }, >=20 > Where did you get that? BSP driver that I checked doesn't mentions it. >=20 yes, just double checked and this bit is not valid, sorry, I=E2=80=99ll = remove it. >> + [RST_BUS_R_PPU] =3D { 0x1ac, BIT(16) }, >> + [RST_BUS_R_RTC] =3D { 0x20c, BIT(16) }, >> + [RST_BUS_R_CPUCFG] =3D { 0x22c, BIT(16) }, >> +}; >> + >> +static const struct sunxi_ccu_desc sun8i_v853_r_ccu_desc =3D { >> + .ccu_clks =3D sun8i_v853_r_ccu_clks, >> + .num_ccu_clks =3D ARRAY_SIZE(sun8i_v853_r_ccu_clks), >> + >> + .hw_clks =3D &sun8i_v853_r_hw_clks, >> + >> + .resets =3D sun8i_v853_r_ccu_resets, >> + .num_resets =3D ARRAY_SIZE(sun8i_v853_r_ccu_resets), >> +}; >> + >> +static int sun8i_v853_r_ccu_probe(struct platform_device *pdev) >> +{ >> + void __iomem *reg; >> + >> + reg =3D devm_platform_ioremap_resource(pdev, 0); >> + if (IS_ERR(reg)) >> + return PTR_ERR(reg); >> + >> + return devm_sunxi_ccu_probe(&pdev->dev, reg, = &sun8i_v853_r_ccu_desc); >> +} >> + >> +static const struct of_device_id sun8i_v853_r_ccu_ids[] =3D { >> + { .compatible =3D "allwinner,sun8i-v853-r-ccu" }, >> + { } >> +}; >> +MODULE_DEVICE_TABLE(of, sun8i_v853_r_ccu_ids); >> + >> +static struct platform_driver sun8i_v853_r_ccu_driver =3D { >> + .probe =3D sun8i_v853_r_ccu_probe, >> + .driver =3D { >> + .name =3D "sun8i-v853-r-ccu", >> + .suppress_bind_attrs =3D true, >> + .of_match_table =3D sun8i_v853_r_ccu_ids, >> + }, >> +}; >> +module_platform_driver(sun8i_v853_r_ccu_driver); >> + >> +MODULE_IMPORT_NS("SUNXI_CCU"); >> +MODULE_DESCRIPTION("Support for the Allwinner V853 PRCM CCU"); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v853-r.h = b/drivers/clk/sunxi-ng/ccu-sun8i-v853-r.h >> new file mode 100644 >> index 000000000000..2c6cc7b6f251 >> --- /dev/null >> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-v853-r.h >> @@ -0,0 +1,14 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Copyright (C) 2025 Andras Szemzo >> + */ >> + >> +#ifndef _CCU_SUN8I_V853_R_H >> +#define _CCU_SUN8I_V853_R_H >> + >> +#include >> +#include >> + >> +#define CLK_NUMBER (CLK_BUS_R_CPUCFG + 1) >> + >> +#endif >> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v853.c = b/drivers/clk/sunxi-ng/ccu-sun8i-v853.c >> new file mode 100644 >> index 000000000000..4b32f3a913cf >> --- /dev/null >> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-v853.c >> @@ -0,0 +1,1145 @@ >> +// SPDX-License-Identifier: GPL-2.0 >> +/* >> + * Copyright (C) 2025 Andras Szemzo >> + * >> + * Based on ccu-sun20i-d1.c by Samuel Holland. >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> + >> +#include "../clk.h" >> + >> +#include "ccu_common.h" >> +#include "ccu_reset.h" >> + >> +#include "ccu_div.h" >> +#include "ccu_gate.h" >> +#include "ccu_mp.h" >> +#include "ccu_mult.h" >> +#include "ccu_nk.h" >> +#include "ccu_nkm.h" >> +#include "ccu_nkmp.h" >> +#include "ccu_nm.h" >> + >> +#include "ccu-sun8i-v853.h" >> + >> +static const struct clk_parent_data osc24M[] =3D { >> + { .fw_name =3D "hosc" } >> +}; >> + >> +/* >> + * For the CPU PLL, the output divider is described as "only for = testing" >> + * in the user manual. So it's not modelled and forced to 0. >> + */ >> +#define SUN8I_V853_PLL_CPU_REG 0x000 >> + >> +static struct ccu_mult pll_cpu_clk =3D { >> + .enable =3D BIT(27), >> + .lock =3D BIT(28), >> + .mult =3D _SUNXI_CCU_MULT_MIN(8, 8, 11), >> + .common =3D { >> + .reg =3D 0x000, >> + .hw.init =3D CLK_HW_INIT_PARENTS_DATA("pll-cpu", osc24M, >> + &ccu_mult_ops, >> + CLK_SET_RATE_GATE), >> + }, >> +}; >> + >> +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K = */ >> +#define SUN8I_V853_PLL_DDR_REG 0x010 >> +static struct ccu_nkmp pll_ddr_clk =3D { >> + .enable =3D BIT(27), >> + .lock =3D BIT(28), >> + .n =3D _SUNXI_CCU_MULT_MIN(8, 8, 11), >> + .m =3D _SUNXI_CCU_DIV(1, 1), /* input divider */ >> + .p =3D _SUNXI_CCU_DIV(0, 1), /* output divider */ >> + .common =3D { >> + .reg =3D 0x010, >> + .hw.init =3D CLK_HW_INIT_PARENTS_DATA("pll-ddr", osc24M, >> + &ccu_nkmp_ops, >> + CLK_SET_RATE_GATE), >> + }, >> +}; >> + >> +#define SUN8I_V853_PLL_PERIPH_REG 0x020 >> +static struct ccu_nm pll_periph_4x_clk =3D { >> + .enable =3D BIT(27), >> + .lock =3D BIT(28), >> + .n =3D _SUNXI_CCU_MULT_MIN(8, 8, 11), >> + .m =3D _SUNXI_CCU_DIV(1, 1), /* input divider */ >> + .common =3D { >> + .reg =3D 0x020, >> + .hw.init =3D CLK_HW_INIT_PARENTS_DATA("pll-periph-4x", osc24M, >> + &ccu_nm_ops, >> + CLK_SET_RATE_GATE), >> + }, >> +}; >> + >> +static const struct clk_hw *pll_periph_4x_hws[] =3D { >> + &pll_periph_4x_clk.common.hw >> +}; >> + >> +static SUNXI_CCU_M_HWS(pll_periph_2x_clk, "pll-periph-2x", = pll_periph_4x_hws, >> + 0x020, 16, 3, 0); >> + >> +static SUNXI_CCU_M_HWS(pll_periph_800M_clk, "pll-periph-800M", = pll_periph_4x_hws, >> + 0x020, 20, 3, 0); >> + >> +static SUNXI_CCU_M_HWS(pll_periph_480M_clk, "pll-periph-480M", = pll_periph_4x_hws, >> + 0x020, 2, 3, 0); >> + >> +static CLK_FIXED_FACTOR_HW(pll_periph_600M_clk, "pll-periph-600M", >> + &pll_periph_2x_clk.common.hw, 2, 1, 0); >> + >> +static CLK_FIXED_FACTOR_HW(pll_periph_400M_clk, "pll-periph-400M", >> + &pll_periph_2x_clk.common.hw, 3, 1, 0); >> + >> +static CLK_FIXED_FACTOR_HW(pll_periph_300M_clk, "pll-periph-300M", >> + &pll_periph_600M_clk.hw, 2, 1, 0); >> + >> +static CLK_FIXED_FACTOR_HW(pll_periph_200M_clk, "pll-periph-200M", >> + &pll_periph_400M_clk.hw, 2, 1, 0); >> + >> +static CLK_FIXED_FACTOR_HW(pll_periph_160M_clk, "pll-periph-160M", >> + &pll_periph_480M_clk.common.hw, 3, 1, 0); >> + >> +static CLK_FIXED_FACTOR_HW(pll_periph_150M_clk, "pll-periph-150M", >> + &pll_periph_300M_clk.hw, 2, 1, 0); >> + >> +/* >> + * For Video PLLs, the output divider is described as "only for = testing" >> + * in the user manual. >> + */ >> +#define SUN8I_V853_PLL_VIDEO_REG 0x040 >> +static struct ccu_nkmp pll_video_4x_clk =3D { >> + .enable =3D BIT(27), >> + .lock =3D BIT(28), >> + .n =3D _SUNXI_CCU_MULT_MIN(8, 8, 11), >> + .p =3D _SUNXI_CCU_DIV(1, 1), /* input divider */ >> + .common =3D { >> + .reg =3D 0x040, >> + .hw.init =3D CLK_HW_INIT_PARENTS_DATA("pll-video-4x", osc24M, >> + &ccu_nkmp_ops, >> + CLK_SET_RATE_GATE), >> + }, >> +}; >> + >> +static const struct clk_hw *pll_video_4x_hws[] =3D { >> + &pll_video_4x_clk.common.hw >> +}; >> +static CLK_FIXED_FACTOR_HWS(pll_video_2x_clk, "pll-video-2x", >> + pll_video_4x_hws, 2, 1, CLK_SET_RATE_PARENT); >> +static CLK_FIXED_FACTOR_HWS(pll_video_1x_clk, "pll-video-1x", >> + pll_video_4x_hws, 4, 1, CLK_SET_RATE_PARENT); >> + >> + >> +/* >> + * For CSI PLLs, the output divider is described as "only for = testing" >> + * in the user manual. >> + */ >> +#define SUN8I_V853_PLL_CSI_REG 0x048 >> +static struct ccu_nkmp pll_csi_4x_clk =3D { >> + .enable =3D BIT(27), >> + .lock =3D BIT(28), >> + .n =3D _SUNXI_CCU_MULT_MIN(8, 8, 11), >> + .p =3D _SUNXI_CCU_DIV(1, 1), /* input divider */ >> + .common =3D { >> + .reg =3D 0x048, >> + .hw.init =3D CLK_HW_INIT_PARENTS_DATA("pll-csi-4x", osc24M, >> + &ccu_nkmp_ops, >> + CLK_SET_RATE_GATE), >> + }, >> +}; >> + >> +static CLK_FIXED_FACTOR_HW(pll_csi_clk, "pll-csi", >> + &pll_csi_4x_clk.common.hw, 4, 1, CLK_SET_RATE_PARENT); >> + >> + >> +#define SUN8I_V853_PLL_AUDIO_REG 0x078 >> +static struct ccu_sdm_setting pll_audio_div5_sdm_table[] =3D { >> + { .rate =3D 196608000, .pattern =3D 0xc001eb85, .m =3D 5, .n =3D 40 = }, /* 24.576 */ >> + { .rate =3D 67737600, .pattern =3D 0xc001288d, .m =3D 8, .n =3D 22 = }, /* 22.5792 */ >> +}; >> + >> +static struct ccu_nm pll_audio_div5_clk =3D { >> + .enable =3D BIT(27), >> + .lock =3D BIT(28), >> + .n =3D _SUNXI_CCU_MULT(8, 8), >> + .m =3D _SUNXI_CCU_DIV(20, 3), >> + .sdm =3D _SUNXI_CCU_SDM(pll_audio_div5_sdm_table, >> + BIT(24), 0x0178, BIT(31)), >> + .common =3D { >> + .reg =3D 0x0078, >> + .features =3D CCU_FEATURE_SIGMA_DELTA_MOD, >> + .hw.init =3D CLK_HW_INIT_PARENTS_DATA("pll-audio-div5", = osc24M, >> + &ccu_nm_ops, >> + CLK_SET_RATE_UNGATE), >> + }, >> +}; >> + >> +static const struct clk_hw *pll_audio_div5_hws[] =3D { >> + &pll_audio_div5_clk.common.hw >> +}; >> + >> +static SUNXI_CCU_M_HWS(pll_audio_1x_clk, "pll-audio-1x", = pll_audio_div5_hws, >> + 0xe00, 0, 5, CLK_SET_RATE_PARENT); >> + >> +/* pll-audio-div2 and pll-audio-4x not used, because pll-audio-1x = can cover=20 >> + * 22.5792M and 24.576M=20 >> + */ >> +static SUNXI_CCU_M(pll_audio_div2_clk, "pll-audio-div2", = "pll-audio", >> + 0x078, 16, 3, 0); >> +static SUNXI_CCU_M(pll_audio_4x_clk, "pll-audio-4x", = "pll-audio-div2", >> + 0xe00, 5, 5, 0); >> + >> +/* >> + * For the NPU PLL, the output divider is described as "only for = testing" >> + * in the user manual. >> + */ >> +#define SUN8I_V853_PLL_NPU_REG 0x080 >> +static struct ccu_nkmp pll_npu_4x_clk =3D { >> + .enable =3D BIT(27), >> + .lock =3D BIT(28), >> + .n =3D _SUNXI_CCU_MULT_MIN(8, 8, 11), >> + .p =3D _SUNXI_CCU_DIV(1, 1), /* input divider */ >> + .common =3D { >> + .reg =3D 0x080, >> + .hw.init =3D CLK_HW_INIT_PARENTS_DATA("pll-npu-4x", osc24M, >> + &ccu_nkmp_ops, >> + CLK_SET_RATE_UNGATE), >> + }, >> +}; >> + >> +/* >> + * The CPU gate is not modelled - it is in a separate register = (0x504) >> + * and has a special key field. The clock must not be gated anyway = by >> + * the kernel. >> + */ >> +static const struct clk_parent_data cpu_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .fw_name =3D "losc" }, >> + { .fw_name =3D "iosc" }, >> + { .hw =3D &pll_cpu_clk.common.hw }, >> + { .hw =3D &pll_periph_600M_clk.hw }, >> + { .hw =3D &pll_periph_800M_clk.common.hw }, >> +}; >> + >> +/* >> + * There is a P factor (PLL_OUT_EXT_DIVP[17:16]) in this register, = but it is not modeled. >> + * The manual states that it should be used only, when the output = clock is less than 288 MHz. >> + */ >> +static SUNXI_CCU_MUX_DATA(cpu_clk, "cpu", cpu_parents, >> + 0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL); >> + >> +static const struct clk_hw *cpu_hws[] =3D { &cpu_clk.common.hw }; >> + >> +static SUNXI_CCU_M_HWS(cpu_axi_clk, "cpu-axi", cpu_hws, >> + 0x500, 0, 2, 0); >> +static SUNXI_CCU_M_HWS(cpu_apb_clk, "cpu-apb", cpu_hws, >> + 0x500, 8, 2, 0); >> + >> +static const struct clk_parent_data ahb_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .fw_name =3D "losc" }, >> + { .fw_name =3D "iosc" }, >> + { .hw =3D &pll_periph_600M_clk.hw }, >> +}; >> +static SUNXI_CCU_MP_DATA_WITH_MUX(ahb_clk, "ahb", ahb_parents, = 0x510, >> + 0, 5, /* M */ >> + 8, 2, /* P */ >> + 24, 2, /* mux */ >> + 0); >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX(apb0_clk, "apb0", ahb_parents, = 0x520, >> + 0, 5, /* M */ >> + 8, 2, /* P */ >> + 24, 2, /* mux */ >> + 0); >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX(apb1_clk, "apb1", ahb_parents, = 0x524, >> + 0, 5, /* M */ >> + 8, 2, /* P */ >> + 24, 2, /* mux */ >> + 0); >> + >> +static const struct clk_hw *ahb_hws[] =3D { &ahb_clk.common.hw }; >> +static const struct clk_hw *apb0_hws[] =3D { &apb0_clk.common.hw }; >> +static const struct clk_hw *apb1_hws[] =3D { &apb1_clk.common.hw }; >> + >> + >> +static const struct clk_hw *de_g2d_parents[] =3D { >> + &pll_periph_300M_clk.hw, >> + &pll_video_1x_clk.hw, >> +}; >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(de_clk, "de", de_g2d_parents, = 0x600, >> + 0, 5, /* M */ >> + 24, 1, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >> + >> +static SUNXI_CCU_GATE_HWS(bus_de_clk, "bus-de", ahb_hws, >> + 0x60c, BIT(0), 0); >> + >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(g2d_clk, "g2d", de_g2d_parents, = 0x630, >> + 0, 5, /* M */ >> + 24, 1, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >> + >> +static SUNXI_CCU_GATE_HWS(bus_g2d_clk, "bus-g2d", ahb_hws, >> + 0x63c, BIT(0), 0); >> + >> + >> +static const struct clk_parent_data ce_parents[] =3D { >> + { .fw_name =3D "hosc" }, >=20 > Where this come from? V853 manual v1.1 doesn't have it. There is a sun8iw21 ccu driver [1], where hosc is the first parent: [1]: = https://github.com/YuzukiHD/TinyVision/blob/main/kernel/bsp/drivers/clk/su= nxi-ng/ccu-sun8iw21.c#L262 I don=E2=80=99t know if the manual or if this driver is the correct. >=20 >> + { .hw =3D &pll_periph_400M_clk.hw, }, >> + { .hw =3D &pll_periph_300M_clk.hw, } >> +}; >> +static SUNXI_CCU_M_DATA_WITH_MUX_GATE(ce_clk, "ce", ce_parents, = 0x680, >> + 0, 4, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >=20 > Set rate parent flag doesn't make sense on constant parents. yes >=20 >> + >> +static SUNXI_CCU_GATE_HWS(bus_ce_clk, "bus-ce", ahb_hws, >> + 0x68c, BIT(0) | BIT(1), 0); >> + >> +static const struct clk_hw *ve_parents[] =3D { >> + &pll_periph_300M_clk.hw, >> + &pll_periph_400M_clk.hw, >> + &pll_periph_480M_clk.common.hw, >> + &pll_npu_4x_clk.common.hw, >> + &pll_video_4x_clk.common.hw, >> + &pll_csi_4x_clk.common.hw, >> +}; >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690, >> + 0, 5, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >=20 > CLK_SET_RATE_PARENT flag? Cedrus driver set working clock at the = beginning. >=20 ok >> + >> +static SUNXI_CCU_GATE_HWS(bus_ve_clk, "bus-ve", ahb_hws, >> + 0x69c, BIT(0), 0); >> + >> + >> +static const struct clk_hw *npu_parents[] =3D { >> + &pll_periph_480M_clk.common.hw, >> + &pll_periph_600M_clk.hw, >> + &pll_periph_800M_clk.common.hw, >> + &pll_npu_4x_clk.common.hw, >> +}; >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(npu_clk, "npu", npu_parents, = 0x6e0, >> + 0, 5, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >=20 > I think CLK_SET_RATE_PARENT would also be beneficial here. I tried to mimic how the BSP setup the NPU clocks (as I think, not = sure), in the dts I setup it like: npu: npu@3050000 { compatible =3D "vivante,gc"; reg =3D <0x03050000 0x1000>; interrupts =3D ; interrupt-names =3D "npu"; clocks =3D <&ccu CLK_BUS_NPU>, <&ccu CLK_NPU>; clock-names =3D "bus", "core"; assigned-clocks =3D <&ccu CLK_PLL_NPU_4X>, <&ccu = CLK_NPU>; assigned-clock-parents =3D <&dcxo>, <&ccu = CLK_PLL_NPU_4X>; assigned-clock-rates =3D <1392000000>, = <348000000>; resets =3D <&ccu RST_BUS_NPU>; iommus =3D <&iommu 6>; power-domains =3D <&ppu PD_NPU>; }; With these settings (after adding a reset support to the etnaviv driver) = at least I'm able to dump some registers via debugfs. Do you think I should add the CLK_SET_RATE_PARENT flag? >=20 >> + >> +static SUNXI_CCU_GATE_HWS(bus_npu_clk, "bus-npu", ahb_hws, >> + 0x6ec, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_dma_clk, "bus-dma", ahb_hws, >> + 0x70c, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_msgbox0_clk, "bus-msgbox0", ahb_hws, >> + 0x71c, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_msgbox1_clk, "bus-msgbox1", ahb_hws, >> + 0x71c, BIT(1), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_spinlock_clk, "bus-spinlock", ahb_hws, >> + 0x72c, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_hstimer_clk, "bus-hstimer", ahb_hws, >> + 0x73c, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_DATA(avs_clk, "avs", osc24M, >> + 0x740, BIT(31), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_dbg_clk, "bus-dbg", ahb_hws, >> + 0x78c, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_pwm_clk, "bus-pwm", apb0_hws, >> + 0x7ac, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_iommu_clk, "bus-iommu", ahb_hws, >> + 0x7bc, BIT(0), 0); >> + >> +static const struct clk_hw *dram_parents[] =3D { >> + &pll_ddr_clk.common.hw, >> + &pll_periph_2x_clk.common.hw, >> + &pll_periph_800M_clk.common.hw, >> +}; >> +static SUNXI_CCU_MP_HW_WITH_MUX_GATE(dram_clk, "dram", dram_parents, = 0x800, >> + 0, 5, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), CLK_IS_CRITICAL); >=20 > This clock needs update field to be set to actually apply = configuration. So > same comment as on A523 clock version, this needs new flag to be = introduced > for such case. >=20 ok >> + >> +static CLK_FIXED_FACTOR_HW(mbus_clk, "mbus", >> + &dram_clk.common.hw, 4, 1, 0); >> + >> +static const struct clk_hw *mbus_hws[] =3D { &mbus_clk.hw }; >> + >> +static SUNXI_CCU_GATE_HWS(mbus_dma_clk, "mbus-dma", mbus_hws, >> + 0x804, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(mbus_ve_clk, "mbus-ve", mbus_hws, >> + 0x804, BIT(1), 0); >> +static SUNXI_CCU_GATE_HWS(mbus_ce_clk, "mbus-ce", mbus_hws, >> + 0x804, BIT(2), 0); >> +static SUNXI_CCU_GATE_HWS(mbus_csi_clk, "mbus-csi", mbus_hws, >> + 0x804, BIT(8), 0); >> +static SUNXI_CCU_GATE_HWS(mbus_isp_clk, "mbus-isp", mbus_hws, >> + 0x804, BIT(9), 0); >> +static SUNXI_CCU_GATE_HWS(mbus_g2d_clk, "mbus-g2d", mbus_hws, >> + 0x804, BIT(10), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_dram_clk, "bus-dram", ahb_hws, >> + 0x80c, BIT(0), CLK_IS_CRITICAL); >> + >> + >> +static const struct clk_parent_data mmc0_mmc1_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .hw =3D &pll_periph_400M_clk.hw, }, >> + { .hw =3D &pll_periph_300M_clk.hw, }, >> +}; >=20 > Just mmc_parents. ok >=20 >> +static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(mmc0_clk, "mmc0", = mmc0_mmc1_parents, 0x830, >> + 0, 4, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(mmc1_clk, "mmc1", = mmc0_mmc1_parents, 0x834, >> + 0, 4, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static const struct clk_parent_data mmc2_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .hw =3D &pll_periph_600M_clk.hw, }, >> + { .hw =3D &pll_periph_400M_clk.hw, }, >> +}; >> +static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(mmc2_clk, "mmc2", = mmc2_parents, 0x838, >> + 0, 4, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_mmc0_clk, "bus-mmc0", ahb_hws, >> + 0x84c, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_mmc1_clk, "bus-mmc1", ahb_hws, >> + 0x84c, BIT(1), 0); >> +static SUNXI_CCU_GATE_HWS(bus_mmc2_clk, "bus-mmc2", ahb_hws, >> + 0x84c, BIT(2), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_uart0_clk, "bus-uart0", apb1_hws, >> + 0x90c, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_uart1_clk, "bus-uart1", apb1_hws, >> + 0x90c, BIT(1), 0); >> +static SUNXI_CCU_GATE_HWS(bus_uart2_clk, "bus-uart2", apb1_hws, >> + 0x90c, BIT(2), 0); >> +static SUNXI_CCU_GATE_HWS(bus_uart3_clk, "bus-uart3", apb1_hws, >> + 0x90c, BIT(3), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_i2c0_clk, "bus-i2c0", apb1_hws, >> + 0x91c, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_i2c1_clk, "bus-i2c1", apb1_hws, >> + 0x91c, BIT(1), 0); >> +static SUNXI_CCU_GATE_HWS(bus_i2c2_clk, "bus-i2c2", apb1_hws, >> + 0x91c, BIT(2), 0); >> +static SUNXI_CCU_GATE_HWS(bus_i2c3_clk, "bus-i2c3", apb1_hws, >> + 0x91c, BIT(3), 0); >> +static SUNXI_CCU_GATE_HWS(bus_i2c4_clk, "bus-i2c4", apb1_hws, >> + 0x91c, BIT(4), 0); >> + >> +static const struct clk_parent_data spi_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .hw =3D &pll_periph_300M_clk.hw, }, >> + { .hw =3D &pll_periph_200M_clk.hw, }, >> +}; >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(spi0_clk, "spi0", = spi_parents, 0x940, >> + 0, 4, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(spi1_clk, "spi1", = spi_parents, 0x944, >> + 0, 4, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(spi2_clk, "spi2", = spi_parents, 0x948, >> + 0, 4, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static SUNXI_CCU_MP_DATA_WITH_MUX_GATE(spi3_clk, "spi3", = spi_parents, 0x94c, >> + 0, 4, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_spi0_clk, "bus-spi0", ahb_hws, >> + 0x96c, BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_spi1_clk, "bus-spi1", ahb_hws, >> + 0x96c, BIT(1), 0); >> +static SUNXI_CCU_GATE_HWS(bus_spi2_clk, "bus-spi2", ahb_hws, >> + 0x96c, BIT(2), 0); >> +static SUNXI_CCU_GATE_HWS(bus_spi3_clk, "bus-spi3", ahb_hws, >> + 0x96c, BIT(3), 0); >> + >> + >> +static const struct clk_parent_data spif_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .hw =3D &pll_periph_400M_clk.hw, }, >> + { .hw =3D &pll_periph_300M_clk.hw, }, >> +}; >> + >> +static SUNXI_CCU_M_DATA_WITH_MUX_GATE(spif_clk, "spif", = spif_parents, 0x0950, >> + 0, 4, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >=20 > This is MP clock, P being at 9:8. yes, the BSP driver [1] model it with only M, I=E2=80=99ll update it to = MP. >=20 >> + >> +static SUNXI_CCU_GATE_HWS(bus_spif_clk, "bus-spif", ahb_hws, >> + 0x096c, BIT(4), 0); >> + >> + >> +static const struct clk_hw *pll_periph_150M_hws[] =3D { = &pll_periph_150M_clk.hw }; >> +static SUNXI_CCU_GATE_HWS_WITH_PREDIV(emac_25M_clk, "emac-25M", = pll_periph_150M_hws, >> + 0x970, BIT(31) | BIT(30), 6, 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_emac_clk, "bus-emac", ahb_hws, >> + 0x97c, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_gpadc_clk, "bus-gpadc", apb0_hws, >> + 0x9ec, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_ths_clk, "bus-ths", ahb_hws, >> + 0x9fc, BIT(0), 0); >> + >> + >> +static const struct clk_hw *audio_parents[] =3D { >> + &pll_audio_1x_clk.common.hw, >> + &pll_audio_4x_clk.common.hw, >> +}; >> + >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(i2s0_clk, "i2s0", audio_parents, = 0xa10, >> + 0, 4, /* M */ >> + 24, 1, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >> + >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(i2s1_clk, "i2s1", audio_parents, = 0xa14, >> + 0, 4, /* M */ >> + 24, 1, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >> + >> +static SUNXI_CCU_GATE_HWS(bus_i2s0_clk, "bus-i2s0", ahb_hws, >> + 0xa20, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_i2s1_clk, "bus-i2s1", ahb_hws, >> + 0xa20, BIT(1), 0); >> + >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(dmic_clk, "dmic", audio_parents, = 0xa40, >> + 0, 4, /* M */ >> + 24, 1, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >> + >> +static SUNXI_CCU_GATE_HWS(bus_dmic_clk, "bus-dmic", ahb_hws, >> + 0xa4c, BIT(0), 0); >> + >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(audio_codec_dac_clk, = "audio-codec-dac",=20 >> + audio_parents, 0xa50, >> + 0, 4, /* M */ >> + 24, 1, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >> + >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(audio_codec_adc_clk, = "audio-codec-adc",=20 >> + audio_parents, 0xa54, >> + 0, 4, /* M */ >> + 24, 1, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >> + >> +static SUNXI_CCU_GATE_HWS(bus_audio_codec_clk, "bus-audio-codec", = apb0_hws, >> + 0xa5c, BIT(0), 0); >> + >> +/* >> + * There are OHCI 12M clock source selection bits for the USB 2.0 = port. >> + * We will force them to 0 (12M divided from 48M). >> + */ >> +static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, = 0); >> + >> +#define SUN8I_V853_USB_CLK_REG 0xa70 >> + >> +static SUNXI_CCU_GATE(usb_ohci_clk, "usb", "osc12M", 0x0a70, = BIT(31), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_ohci_clk, "bus-ohci", ahb_hws, 0xa8c, = BIT(0), 0); >> +static SUNXI_CCU_GATE_HWS(bus_ehci_clk, "bus-ehci", ahb_hws, 0xa8c, = BIT(4), 0); >> +static SUNXI_CCU_GATE_HWS(bus_otg_clk, "bus-otg", ahb_hws, 0xa8c, = BIT(8), 0); >> + >> +static SUNXI_CCU_GATE_HWS(bus_dpss_top_clk, "bus-dpss-top", ahb_hws, >> + 0xabc, BIT(0), 0); >> + >> + >> +static const struct clk_parent_data mipi_dsi_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .hw =3D &pll_periph_200M_clk.hw }, >> + { .hw =3D &pll_periph_150M_clk.hw }, >> +}; >> +static SUNXI_CCU_M_DATA_WITH_MUX_GATE(mipi_dsi_clk, "mipi-dsi", = mipi_dsi_parents,=20 >> + 0xb24, >> + 0, 4, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >=20 > CLK_SET_RATE_PARENT doesn't do anything for constant clocks. >=20 ok > Best regards, > Jernej >=20 >> + >> +static SUNXI_CCU_GATE_HWS(bus_mipi_dsi_clk, "bus-mipi-dsi", ahb_hws, >> + 0xb4c, BIT(0), 0); >> + >> + >> +static const struct clk_hw *tcon_lcd_parents[] =3D { >> + &pll_video_4x_clk.common.hw, >> + &pll_periph_2x_clk.common.hw, >> + &pll_csi_4x_clk.common.hw, >> +}; >> +static SUNXI_CCU_MP_HW_WITH_MUX_GATE(tcon_lcd_clk, "tcon-lcd", = tcon_lcd_parents,=20 >> + 0xb60, >> + 0, 4, /* M */ >> + 8, 2, /* P */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + CLK_SET_RATE_PARENT); >> + >> +static SUNXI_CCU_GATE_HWS(bus_tcon_lcd_clk, "bus-tcon-lcd", ahb_hws, >> + 0xb7c, BIT(0), 0); >> + >> + >> +static const struct clk_hw *csi_top_parents[] =3D { >> + &pll_periph_300M_clk.hw, >> + &pll_periph_400M_clk.hw, >> + &pll_video_4x_clk.common.hw, >> + &pll_csi_4x_clk.common.hw, >> +}; >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(csi_top_clk, "csi-top", = csi_top_parents, 0xc04, >> + 0, 5, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> + >> +static const struct clk_parent_data csi_mclk_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .hw =3D &pll_csi_4x_clk.common.hw }, >> + { .hw =3D &pll_video_4x_clk.common.hw }, >> + { .hw =3D &pll_periph_2x_clk.common.hw }, >> +}; >> +static SUNXI_CCU_M_DATA_WITH_MUX_GATE(csi_mclk0_clk, "csi-mclk0", = csi_mclk_parents,=20 >> + 0xc08, >> + 0, 5, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static SUNXI_CCU_M_DATA_WITH_MUX_GATE(csi_mclk1_clk, "csi-mclk1", = csi_mclk_parents,=20 >> + 0xc0c, >> + 0, 5, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static SUNXI_CCU_M_DATA_WITH_MUX_GATE(csi_mclk2_clk, "csi-mclk2", = csi_mclk_parents,=20 >> + 0xc10, >> + 0, 5, /* M */ >> + 24, 3, /* mux */ >> + BIT(31), /* gate */ >> + 0); >=20 > All CSI mclks should be MP type. >=20 Again, these are from the BSP, I=E2=80=99ll update them. >> + >> +static SUNXI_CCU_GATE_HWS(bus_csi_clk, "bus-csi", ahb_hws, >> + 0xc2c, BIT(0), 0); >> + >> + >> +static SUNXI_CCU_GATE_HWS(bus_wiegand_clk, "bus-wiegand", ahb_hws, >> + 0xc7c, BIT(0), 0); >> + >> + >> +static const struct clk_parent_data riscv_parents[] =3D { >> + { .fw_name =3D "hosc" }, >> + { .fw_name =3D "losc" }, >> + { .fw_name =3D "iosc" }, >> + { .hw =3D &pll_periph_600M_clk.hw }, >> + { .hw =3D &pll_periph_480M_clk.common.hw }, >> + { .hw =3D &pll_cpu_clk.common.hw }, >> +}; >> +static SUNXI_CCU_M_DATA_WITH_MUX(riscv_clk, "riscv-cpu", = riscv_parents, 0xd00, >> + 0, 5, /* M */ >> + 24, 3, /* mux */ >> + CLK_SET_RATE_PARENT); >> + >> +/* The riscv-axi clk must be divided by at least 2. */ >> +static struct clk_div_table riscv_axi_table[] =3D { >> + { .val =3D 1, .div =3D 2 }, >> + { .val =3D 2, .div =3D 3 }, >> + { .val =3D 3, .div =3D 4 }, >> + { /* Sentinel */ } >> +}; >> +static SUNXI_CCU_DIV_TABLE_HW(riscv_axi_clk, "riscv-axi", = &riscv_clk.common.hw, >> + 0xd00, 8, 2, riscv_axi_table, 0); >> + >> +static SUNXI_CCU_GATE_HWS_WITH_KEY(riscv_core_gate, = "riscv-core-gate", ahb_hws, >> + 0xd04, BIT(0), 0); >> + >> +static SUNXI_CCU_GATE_HWS(riscv_cfg_gate, "riscv-cfg-gate", ahb_hws, >> + 0xd0c, BIT(0), 0); >> + >> + >> +static const struct clk_hw *pll_periph_160M_hws[] =3D { >> + &pll_periph_160M_clk.hw, >> +}; >> + >> +static SUNXI_CCU_GATE_DATA(fanout_24M_clk, "fanout-24M", osc24M, >> + 0xf30, BIT(0), 0); >> +static SUNXI_CCU_GATE_DATA_WITH_PREDIV(fanout_12M_clk, "fanout-12M", = osc24M, >> + 0xf30, BIT(1), 2, 0); >> +static SUNXI_CCU_GATE_HWS_WITH_PREDIV(fanout_16M_clk, "fanout-16M", = pll_periph_160M_hws, >> + 0xf30, BIT(2), 10, 0); >> +static SUNXI_CCU_GATE_HWS_WITH_PREDIV(fanout_25M_clk, "fanout-25M", = pll_periph_150M_hws, >> + 0xf30, BIT(3), 6, 0); >> + >> + >> +/* This clock has a second divider that is not modelled and forced = to 0. */ >> +#define SUN8I_V853_FANOUT_27M_REG 0xf34 >> +static const struct clk_hw *fanout_27M_parents[] =3D { >> + &pll_video_1x_clk.hw, >> + &pll_csi_clk.hw, >> + &pll_periph_300M_clk.hw, >> +}; >> +static SUNXI_CCU_M_HW_WITH_MUX_GATE(fanout_27M_clk, "fanout-27M",=20 >> + fanout_27M_parents, 0xf34, >> + 0, 5, /* M */ >> + 24, 2, /* mux */ >> + BIT(31), /* gate */ >> + 0); >> +static SUNXI_CCU_M_HWS_WITH_GATE(fanout_pclk_clk, "fanout-pclk", = apb0_hws, 0xf38, >> + 0, 5, /* M */ >> + BIT(31), /* gate */ >> + 0); >> + >> +static const struct clk_parent_data fanout_parents[] =3D { >> + { .fw_name =3D "losc" }, >> + { .hw =3D &fanout_12M_clk.common.hw }, >> + { .hw =3D &fanout_16M_clk.common.hw }, >> + { .hw =3D &fanout_24M_clk.common.hw }, >> + { .hw =3D &fanout_25M_clk.common.hw }, >> + { .hw =3D &fanout_27M_clk.common.hw }, >> + { .hw =3D &fanout_pclk_clk.common.hw }, >> +}; >> + >> +static SUNXI_CCU_MUX_DATA_WITH_GATE(fanout0_clk, "fanout0", = fanout_parents, 0xf3c, >> + 0, 3, /* mux */ >> + BIT(21), /* gate */ >> + 0); >> +static SUNXI_CCU_MUX_DATA_WITH_GATE(fanout1_clk, "fanout1", = fanout_parents, 0xf3c, >> + 3, 3, /* mux */ >> + BIT(22), /* gate */ >> + 0); >> +static SUNXI_CCU_MUX_DATA_WITH_GATE(fanout2_clk, "fanout2", = fanout_parents, 0xf3c, >> + 6, 3, /* mux */ >> + BIT(23), /* gate */ >> + 0); >> + >> + >> +static struct ccu_common *sun8i_v853_ccu_clks[] =3D { >> + &pll_cpu_clk.common, >> + &pll_ddr_clk.common, >> + &pll_periph_4x_clk.common, >> + &pll_periph_2x_clk.common, >> + &pll_periph_800M_clk.common, >> + &pll_periph_480M_clk.common, >> + &pll_video_4x_clk.common, >> + &pll_csi_4x_clk.common, >> + &pll_audio_div2_clk.common, >> + &pll_audio_div5_clk.common, >> + &pll_audio_4x_clk.common, >> + &pll_audio_1x_clk.common, >> + &pll_npu_4x_clk.common, >> + &cpu_clk.common, >> + &cpu_axi_clk.common, >> + &cpu_apb_clk.common, >> + &ahb_clk.common, >> + &apb0_clk.common, >> + &apb1_clk.common, >> + &de_clk.common, >> + &bus_de_clk.common, >> + &g2d_clk.common, >> + &bus_g2d_clk.common, >> + &ce_clk.common, >> + &bus_ce_clk.common, >> + &ve_clk.common, >> + &bus_ve_clk.common, >> + &npu_clk.common, >> + &bus_npu_clk.common, >> + &bus_dma_clk.common, >> + &bus_msgbox0_clk.common, >> + &bus_msgbox1_clk.common, >> + &bus_spinlock_clk.common, >> + &bus_hstimer_clk.common, >> + &avs_clk.common, >> + &bus_dbg_clk.common, >> + &bus_pwm_clk.common, >> + &bus_iommu_clk.common, >> + &dram_clk.common, >> + &mbus_dma_clk.common, >> + &mbus_ve_clk.common, >> + &mbus_ce_clk.common, >> + &mbus_csi_clk.common, >> + &mbus_isp_clk.common, >> + &mbus_g2d_clk.common, >> + &bus_dram_clk.common, >> + &mmc0_clk.common, >> + &mmc1_clk.common, >> + &mmc2_clk.common, >> + &bus_mmc0_clk.common, >> + &bus_mmc1_clk.common, >> + &bus_mmc2_clk.common, >> + &bus_uart0_clk.common, >> + &bus_uart1_clk.common, >> + &bus_uart2_clk.common, >> + &bus_uart3_clk.common, >> + &bus_i2c0_clk.common, >> + &bus_i2c1_clk.common, >> + &bus_i2c2_clk.common, >> + &bus_i2c3_clk.common, >> + &bus_i2c4_clk.common, >> + &spi0_clk.common, >> + &spi1_clk.common, >> + &spi2_clk.common, >> + &spi3_clk.common, >> + &bus_spi0_clk.common, >> + &bus_spi1_clk.common, >> + &bus_spi2_clk.common, >> + &bus_spi3_clk.common, >> + &spif_clk.common, >> + &bus_spif_clk.common, >> + &emac_25M_clk.common, >> + &bus_emac_clk.common, >> + &bus_gpadc_clk.common, >> + &bus_ths_clk.common, >> + &usb_ohci_clk.common, >> + &bus_ohci_clk.common, >> + &bus_ehci_clk.common, >> + &bus_otg_clk.common, >> + &i2s0_clk.common, >> + &i2s1_clk.common, >> + &bus_i2s0_clk.common, >> + &bus_i2s1_clk.common, >> + &dmic_clk.common, >> + &bus_dmic_clk.common, >> + &audio_codec_dac_clk.common, >> + &audio_codec_adc_clk.common, >> + &bus_audio_codec_clk.common, >> + &bus_dpss_top_clk.common, >> + &mipi_dsi_clk.common, >> + &bus_mipi_dsi_clk.common, >> + &tcon_lcd_clk.common, >> + &bus_tcon_lcd_clk.common, >> + &csi_top_clk.common, >> + &csi_mclk0_clk.common, >> + &csi_mclk1_clk.common, >> + &csi_mclk2_clk.common, >> + &bus_csi_clk.common, >> + &bus_wiegand_clk.common, >> + &riscv_clk.common, >> + &riscv_axi_clk.common, >> + &riscv_core_gate.common, >> + &riscv_cfg_gate.common, >> + &fanout_24M_clk.common, >> + &fanout_12M_clk.common, >> + &fanout_16M_clk.common, >> + &fanout_25M_clk.common, >> + &fanout_27M_clk.common, >> + &fanout_pclk_clk.common, >> + &fanout0_clk.common, >> + &fanout1_clk.common, >> + &fanout2_clk.common, >> +}; >> + >> +static struct clk_hw_onecell_data sun8i_v853_hw_clks =3D { >> + .num =3D CLK_NUMBER, >> + .hws =3D { >> + [CLK_OSC12M] =3D &osc12M_clk.hw, >> + [CLK_PLL_CPU] =3D &pll_cpu_clk.common.hw, >> + [CLK_PLL_DDR] =3D &pll_ddr_clk.common.hw, >> + [CLK_PLL_PERIPH_4X] =3D &pll_periph_4x_clk.common.hw, >> + [CLK_PLL_PERIPH_2X] =3D &pll_periph_2x_clk.common.hw, >> + [CLK_PLL_PERIPH_800M] =3D &pll_periph_800M_clk.common.hw, >> + [CLK_PLL_PERIPH_480M] =3D &pll_periph_480M_clk.common.hw, >> + [CLK_PLL_PERIPH_600M] =3D &pll_periph_600M_clk.hw, >> + [CLK_PLL_PERIPH_400M] =3D &pll_periph_400M_clk.hw, >> + [CLK_PLL_PERIPH_300M] =3D &pll_periph_300M_clk.hw, >> + [CLK_PLL_PERIPH_200M] =3D &pll_periph_200M_clk.hw, >> + [CLK_PLL_PERIPH_160M] =3D &pll_periph_160M_clk.hw, >> + [CLK_PLL_PERIPH_150M] =3D &pll_periph_150M_clk.hw, >> + [CLK_PLL_VIDEO_4X] =3D &pll_video_4x_clk.common.hw, >> + [CLK_PLL_VIDEO_2X] =3D &pll_video_2x_clk.hw, >> + [CLK_PLL_VIDEO_1X] =3D &pll_video_1x_clk.hw, >> + [CLK_PLL_CSI_4X] =3D &pll_csi_4x_clk.common.hw, >> + [CLK_PLL_AUDIO_DIV2] =3D &pll_audio_div2_clk.common.hw, >> + [CLK_PLL_AUDIO_DIV5] =3D &pll_audio_div5_clk.common.hw, >> + [CLK_PLL_AUDIO_4X] =3D &pll_audio_4x_clk.common.hw, >> + [CLK_PLL_AUDIO_1X] =3D &pll_audio_1x_clk.common.hw, >> + [CLK_PLL_NPU_4X] =3D &pll_npu_4x_clk.common.hw, >> + [CLK_CPU] =3D &cpu_clk.common.hw, >> + [CLK_CPU_AXI] =3D &cpu_axi_clk.common.hw, >> + [CLK_CPU_APB] =3D &cpu_apb_clk.common.hw, >> + [CLK_AHB] =3D &ahb_clk.common.hw, >> + [CLK_APB0] =3D &apb0_clk.common.hw, >> + [CLK_APB1] =3D &apb1_clk.common.hw, >> + [CLK_MBUS] =3D &mbus_clk.hw, >> + [CLK_DE] =3D &de_clk.common.hw, >> + [CLK_BUS_DE] =3D &bus_de_clk.common.hw, >> + [CLK_G2D] =3D &g2d_clk.common.hw, >> + [CLK_BUS_G2D] =3D &bus_g2d_clk.common.hw, >> + [CLK_CE] =3D &ce_clk.common.hw, >> + [CLK_BUS_CE] =3D &bus_ce_clk.common.hw, >> + [CLK_VE] =3D &ve_clk.common.hw, >> + [CLK_BUS_VE] =3D &bus_ve_clk.common.hw, >> + [CLK_NPU] =3D &npu_clk.common.hw, >> + [CLK_BUS_NPU] =3D &bus_npu_clk.common.hw, >> + [CLK_BUS_DMA] =3D &bus_dma_clk.common.hw, >> + [CLK_BUS_MSGBOX0] =3D &bus_msgbox0_clk.common.hw, >> + [CLK_BUS_MSGBOX1] =3D &bus_msgbox1_clk.common.hw, >> + [CLK_BUS_SPINLOCK] =3D &bus_spinlock_clk.common.hw, >> + [CLK_BUS_HSTIMER] =3D &bus_hstimer_clk.common.hw, >> + [CLK_AVS] =3D &avs_clk.common.hw, >> + [CLK_BUS_DBG] =3D &bus_dbg_clk.common.hw, >> + [CLK_BUS_PWM] =3D &bus_pwm_clk.common.hw, >> + [CLK_BUS_IOMMU] =3D &bus_iommu_clk.common.hw, >> + [CLK_DRAM] =3D &dram_clk.common.hw, >> + [CLK_MBUS_DMA] =3D &mbus_dma_clk.common.hw, >> + [CLK_MBUS_VE] =3D &mbus_ve_clk.common.hw, >> + [CLK_MBUS_CE] =3D &mbus_ce_clk.common.hw, >> + [CLK_MBUS_CSI] =3D &mbus_csi_clk.common.hw, >> + [CLK_MBUS_ISP] =3D &mbus_isp_clk.common.hw, >> + [CLK_MBUS_G2D] =3D &mbus_g2d_clk.common.hw, >> + [CLK_BUS_DRAM] =3D &bus_dram_clk.common.hw, >> + [CLK_MMC0] =3D &mmc0_clk.common.hw, >> + [CLK_MMC1] =3D &mmc1_clk.common.hw, >> + [CLK_MMC2] =3D &mmc2_clk.common.hw, >> + [CLK_BUS_MMC0] =3D &bus_mmc0_clk.common.hw, >> + [CLK_BUS_MMC1] =3D &bus_mmc1_clk.common.hw, >> + [CLK_BUS_MMC2] =3D &bus_mmc2_clk.common.hw, >> + [CLK_BUS_UART0] =3D &bus_uart0_clk.common.hw, >> + [CLK_BUS_UART1] =3D &bus_uart1_clk.common.hw, >> + [CLK_BUS_UART2] =3D &bus_uart2_clk.common.hw, >> + [CLK_BUS_UART3] =3D &bus_uart3_clk.common.hw, >> + [CLK_BUS_I2C0] =3D &bus_i2c0_clk.common.hw, >> + [CLK_BUS_I2C1] =3D &bus_i2c1_clk.common.hw, >> + [CLK_BUS_I2C2] =3D &bus_i2c2_clk.common.hw, >> + [CLK_BUS_I2C3] =3D &bus_i2c3_clk.common.hw, >> + [CLK_BUS_I2C4] =3D &bus_i2c4_clk.common.hw, >> + [CLK_SPI0] =3D &spi0_clk.common.hw, >> + [CLK_SPI1] =3D &spi1_clk.common.hw, >> + [CLK_SPI2] =3D &spi2_clk.common.hw, >> + [CLK_SPI3] =3D &spi3_clk.common.hw, >> + [CLK_BUS_SPI0] =3D &bus_spi0_clk.common.hw, >> + [CLK_BUS_SPI1] =3D &bus_spi1_clk.common.hw, >> + [CLK_BUS_SPI2] =3D &bus_spi2_clk.common.hw, >> + [CLK_BUS_SPI3] =3D &bus_spi3_clk.common.hw, >> + [CLK_SPIF] =3D &spif_clk.common.hw, >> + [CLK_BUS_SPIF] =3D &bus_spif_clk.common.hw, >> + [CLK_EMAC_25M] =3D &emac_25M_clk.common.hw, >> + [CLK_BUS_EMAC] =3D &bus_emac_clk.common.hw, >> + [CLK_BUS_GPADC] =3D &bus_gpadc_clk.common.hw, >> + [CLK_BUS_THS] =3D &bus_ths_clk.common.hw, >> + [CLK_I2S0] =3D &i2s0_clk.common.hw, >> + [CLK_I2S1] =3D &i2s1_clk.common.hw, >> + [CLK_BUS_I2S0] =3D &bus_i2s0_clk.common.hw, >> + [CLK_BUS_I2S1] =3D &bus_i2s1_clk.common.hw, >> + [CLK_DMIC] =3D &dmic_clk.common.hw, >> + [CLK_BUS_DMIC] =3D &bus_dmic_clk.common.hw, >> + [CLK_AUDIO_CODEC_DAC] =3D &audio_codec_dac_clk.common.hw, >> + [CLK_AUDIO_CODEC_ADC] =3D &audio_codec_adc_clk.common.hw, >> + [CLK_BUS_AUDIO_CODEC] =3D &bus_audio_codec_clk.common.hw, >> + [CLK_USB_OHCI] =3D &usb_ohci_clk.common.hw, >> + [CLK_BUS_OHCI] =3D &bus_ohci_clk.common.hw, >> + [CLK_BUS_EHCI] =3D &bus_ehci_clk.common.hw, >> + [CLK_BUS_OTG] =3D &bus_otg_clk.common.hw, >> + [CLK_BUS_DPSS_TOP] =3D &bus_dpss_top_clk.common.hw, >> + [CLK_MIPI_DSI] =3D &mipi_dsi_clk.common.hw, >> + [CLK_BUS_MIPI_DSI] =3D &bus_mipi_dsi_clk.common.hw, >> + [CLK_TCON_LCD] =3D &tcon_lcd_clk.common.hw, >> + [CLK_BUS_TCON_LCD] =3D &bus_tcon_lcd_clk.common.hw, >> + [CLK_CSI_TOP] =3D &csi_top_clk.common.hw, >> + [CLK_CSI_MCLK0] =3D &csi_mclk0_clk.common.hw, >> + [CLK_CSI_MCLK1] =3D &csi_mclk1_clk.common.hw, >> + [CLK_CSI_MCLK2] =3D &csi_mclk2_clk.common.hw, >> + [CLK_BUS_CSI] =3D &bus_csi_clk.common.hw, >> + [CLK_BUS_WIEGAND] =3D &bus_wiegand_clk.common.hw, >> + [CLK_RISCV] =3D &riscv_clk.common.hw, >> + [CLK_RISCV_AXI] =3D &riscv_axi_clk.common.hw, >> + [CLK_RISCV_CORE_GATE] =3D &riscv_core_gate.common.hw, >> + [CLK_RISCV_CFG_GATE] =3D &riscv_cfg_gate.common.hw, >> + [CLK_FANOUT_24M] =3D &fanout_24M_clk.common.hw, >> + [CLK_FANOUT_16M] =3D &fanout_16M_clk.common.hw, >> + [CLK_FANOUT_12M] =3D &fanout_12M_clk.common.hw, >> + [CLK_FANOUT_25M] =3D &fanout_25M_clk.common.hw, >> + [CLK_FANOUT_27M] =3D &fanout_27M_clk.common.hw, >> + [CLK_FANOUT_PCLK] =3D &fanout_pclk_clk.common.hw, >> + [CLK_FANOUT0] =3D &fanout0_clk.common.hw, >> + [CLK_FANOUT1] =3D &fanout1_clk.common.hw, >> + [CLK_FANOUT2] =3D &fanout2_clk.common.hw, >> + }, >> +}; >> + >> +static struct ccu_reset_map sun8i_v853_ccu_resets[] =3D { >> + [RST_MBUS] =3D { 0x540, BIT(30) }, >> + [RST_BUS_DE] =3D { 0x60c, BIT(16) }, >> + [RST_BUS_G2D] =3D { 0x63c, BIT(16) }, >> + [RST_BUS_CE] =3D { 0x68c, BIT(16) | BIT(17)}, >> + [RST_BUS_VE] =3D { 0x69c, BIT(16) }, >> + [RST_BUS_NPU] =3D { 0x6ec, BIT(16) }, >> + [RST_BUS_DMA] =3D { 0x70c, BIT(16) }, >> + [RST_BUS_MSGBOX0] =3D { 0x71c, BIT(16) }, >> + [RST_BUS_MSGBOX1] =3D { 0x71c, BIT(17) }, >> + [RST_BUS_SPINLOCK] =3D { 0x72c, BIT(16) }, >> + [RST_BUS_HSTIMER] =3D { 0x73c, BIT(16) }, >> + [RST_BUS_DBG] =3D { 0x78c, BIT(16) }, >> + [RST_BUS_PWM] =3D { 0x7ac, BIT(16) }, >> + [RST_BUS_DRAM] =3D { 0x80c, BIT(16) }, >> + [RST_BUS_MMC0] =3D { 0x84c, BIT(16) }, >> + [RST_BUS_MMC1] =3D { 0x84c, BIT(17) }, >> + [RST_BUS_MMC2] =3D { 0x84c, BIT(18) }, >> + [RST_BUS_UART0] =3D { 0x90c, BIT(16) }, >> + [RST_BUS_UART1] =3D { 0x90c, BIT(17) }, >> + [RST_BUS_UART2] =3D { 0x90c, BIT(18) }, >> + [RST_BUS_UART3] =3D { 0x90c, BIT(19) }, >> + [RST_BUS_I2C0] =3D { 0x91c, BIT(16) }, >> + [RST_BUS_I2C1] =3D { 0x91c, BIT(17) }, >> + [RST_BUS_I2C2] =3D { 0x91c, BIT(18) }, >> + [RST_BUS_I2C3] =3D { 0x91c, BIT(19) }, >> + [RST_BUS_I2C4] =3D { 0x91c, BIT(20) }, >> + [RST_BUS_SPI0] =3D { 0x96c, BIT(16) }, >> + [RST_BUS_SPI1] =3D { 0x96c, BIT(17) }, >> + [RST_BUS_SPI2] =3D { 0x96c, BIT(18) }, >> + [RST_BUS_SPI3] =3D { 0x96c, BIT(19) }, >> + [RST_BUS_SPIF] =3D { 0x96c, BIT(20) }, >> + [RST_BUS_EMAC] =3D { 0x97c, BIT(16) }, >> + [RST_BUS_GPADC] =3D { 0x9ec, BIT(16) }, >> + [RST_BUS_THS] =3D { 0x9fc, BIT(16) }, >> + [RST_BUS_I2S0] =3D { 0xa20, BIT(16) }, >> + [RST_BUS_I2S1] =3D { 0xa20, BIT(17) }, >> + [RST_BUS_DMIC] =3D { 0xa4c, BIT(16) }, >> + [RST_BUS_AUDIO_CODEC] =3D { 0xa5c, BIT(16) }, >> + [RST_USB_PHY] =3D { 0xa70, BIT(30) }, >> + [RST_BUS_OHCI] =3D { 0xa8c, BIT(16) }, >> + [RST_BUS_EHCI] =3D { 0xa8c, BIT(20) }, >> + [RST_BUS_OTG] =3D { 0xa8c, BIT(24) }, >> + [RST_BUS_DPSS_TOP] =3D { 0xabc, BIT(16) }, >> + [RST_BUS_MIPI_DSI] =3D { 0xb4c, BIT(16) }, >> + [RST_BUS_TCON_LCD] =3D { 0xb7c, BIT(16) }, >> + [RST_BUS_CSI] =3D { 0xc2c, BIT(16) }, >> + [RST_BUS_WIEGAND] =3D { 0xc7c, BIT(16) }, >> + [RST_RISCV_SYS_APB] =3D { 0xd04, BIT(2), CCU_FEATURE_KEY_FIELD }, >> + [RST_RISCV_SOFT] =3D { 0xd04, BIT(1), CCU_FEATURE_KEY_FIELD }, >> + [RST_RISCV_CFG] =3D { 0xd0c, BIT(16) } >> +}; >> + >> +static const struct sunxi_ccu_desc sun8i_v853_ccu_desc =3D { >> + .ccu_clks =3D sun8i_v853_ccu_clks, >> + .num_ccu_clks =3D ARRAY_SIZE(sun8i_v853_ccu_clks), >> + >> + .hw_clks =3D &sun8i_v853_hw_clks, >> + >> + .resets =3D sun8i_v853_ccu_resets, >> + .num_resets =3D ARRAY_SIZE(sun8i_v853_ccu_resets), >> +}; >> + >> +static const u32 pll_regs[] =3D { >> + SUN8I_V853_PLL_CPU_REG, >> + SUN8I_V853_PLL_DDR_REG, >> + SUN8I_V853_PLL_PERIPH_REG, >> + SUN8I_V853_PLL_VIDEO_REG, >> + SUN8I_V853_PLL_CSI_REG, >> + SUN8I_V853_PLL_AUDIO_REG, >> + SUN8I_V853_PLL_NPU_REG, >> +}; >> + >> +static int sun8i_v853_ccu_probe(struct platform_device *pdev) >> +{ >> + void __iomem *reg; >> + u32 val; >> + int i, ret; >> + >> + reg =3D devm_platform_ioremap_resource(pdev, 0); >> + if (IS_ERR(reg)) >> + return PTR_ERR(reg); >> + >> + /* Enable the enable, LDO, and lock bits on all PLLs. */ >> + for (i =3D 0; i < ARRAY_SIZE(pll_regs); i++) { >> + val =3D readl(reg + pll_regs[i]); >> + val |=3D BIT(31) | BIT(30) | BIT(29); >> + writel(val, reg + pll_regs[i]); >> + } >> + >> + /* Force PLL_CPU factor M to 0. */ >> + val =3D readl(reg + SUN8I_V853_PLL_CPU_REG); >> + val &=3D ~GENMASK(1, 0); >> + writel(val, reg + SUN8I_V853_PLL_CPU_REG); >> + >> + /* >> + * Force OHCI 12M clock source to 00 (12MHz divided from 48MHz) >> + * >> + * This clock mux is still mysterious, and the code just enforces >> + * it to have a valid clock parent. >> + */ >> + val =3D readl(reg + SUN8I_V853_USB_CLK_REG); >> + val &=3D ~GENMASK(25, 24); >> + writel(val, reg + SUN8I_V853_USB_CLK_REG); >> + >> + /* Force fanout-27M factor N to 0. */ >> + val =3D readl(reg + SUN8I_V853_FANOUT_27M_REG); >> + val &=3D ~GENMASK(9, 8); >> + writel(val, reg + SUN8I_V853_FANOUT_27M_REG); >> + >> + ret =3D devm_sunxi_ccu_probe(&pdev->dev, reg, = &sun8i_v853_ccu_desc); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static const struct of_device_id sun8i_v853_ccu_ids[] =3D { >> + { .compatible =3D "allwinner,sun8i-v853-ccu" }, >> + { } >> +}; >> + >> +static struct platform_driver sun8i_v853_ccu_driver =3D { >> + .probe =3D sun8i_v853_ccu_probe, >> + .driver =3D { >> + .name =3D "sun8i-v853-ccu", >> + .suppress_bind_attrs =3D true, >> + .of_match_table =3D sun8i_v853_ccu_ids, >> + }, >> +}; >> +module_platform_driver(sun8i_v853_ccu_driver); >> + >> +MODULE_IMPORT_NS("SUNXI_CCU"); >> +MODULE_DESCRIPTION("Support for the Allwinner V853 CCU"); >> +MODULE_LICENSE("GPL"); >> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-v853.h = b/drivers/clk/sunxi-ng/ccu-sun8i-v853.h >> new file mode 100644 >> index 000000000000..f1b2a4d0bcd3 >> --- /dev/null >> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-v853.h >> @@ -0,0 +1,14 @@ >> +/* SPDX-License-Identifier: GPL-2.0 */ >> +/* >> + * Copyright (C) 2024 Andras Szemzo >> + */ >> + >> +#ifndef _CCU_SUN8I_V853_H_ >> +#define _CCU_SUN8I_V853_H_ >> + >> +#include >> +#include >> + >> +#define CLK_NUMBER (CLK_FANOUT2 + 1) >> + >> +#endif >>=20 >=20 >=20 >=20 >=20