From: Saravanan Sekar <sravanhome@gmail.com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: afaerber@suse.de, sboyd@kernel.org, pn@denx.de,
linux-arm-kernel@lists.infradead.org, mturquette@baylibre.com,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
robh+dt@kernel.org, mark.rutland@arm.com,
catalin.marinas@arm.com, will.deacon@arm.com,
devicetree@vger.kernel.org
Subject: Re: [PATCH v2 1/3] arm64: dts: actions: Enable clock controller for S700
Date: Sun, 1 Jul 2018 19:50:01 +0200 [thread overview]
Message-ID: <279840d3-a254-394d-7782-b3f837c59e57@gmail.com> (raw)
In-Reply-To: <20180630094259.GC7320@Mani-XPS-13-9360>
Hi Mani,
On 06/30/18 11:42, Manivannan Sadhasivam wrote:
> On Thu, Jun 28, 2018 at 09:18:03PM +0200, Saravanan Sekar wrote:
>> Added clock management controller for S700
>>
>> Signed-off-by: Parthiban Nallathambi <pn@denx.de>
>> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
>> ---
>> .../boot/dts/actions/s700-cubieboard7.dts | 7 -
>> arch/arm64/boot/dts/actions/s700.dtsi | 8 ++
>> include/dt-bindings/clock/actions,s700-cmu.h | 128 ++++++++++++++++++
>> 3 files changed, 136 insertions(+), 7 deletions(-)
>> create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h
>>
>> diff --git a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
>> index ef79d7905f44..28f3f4a0f7f0 100644
>> --- a/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
>> +++ b/arch/arm64/boot/dts/actions/s700-cubieboard7.dts
>> @@ -28,12 +28,6 @@
>> device_type = "memory";
>> reg = <0x1 0xe0000000 0x0 0x0>;
>> };
>> -
>> - uart3_clk: uart3-clk {
>> - compatible = "fixed-clock";
>> - clock-frequency = <921600>;
>> - #clock-cells = <0>;
>> - };
> Sourcing CMU clock for UART should be in a separate patch.
sure
>> };
>>
>> &timer {
>> @@ -42,5 +36,4 @@
>>
>> &uart3 {
>> status = "okay";
>> - clocks = <&uart3_clk>;
>> };
>> diff --git a/arch/arm64/boot/dts/actions/s700.dtsi b/arch/arm64/boot/dts/actions/s700.dtsi
>> index 66dd5309f0a2..3530b705df90 100644
>> --- a/arch/arm64/boot/dts/actions/s700.dtsi
>> +++ b/arch/arm64/boot/dts/actions/s700.dtsi
>> @@ -4,6 +4,7 @@
>> */
>>
>> #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/clock/actions,s700-cmu.h>
>>
>> / {
>> compatible = "actions,s700";
>> @@ -44,6 +45,12 @@
>> };
>> };
>>
>> + clock: clock-controller@e0168000 {
>> + compatible = "actions,s700-cmu";
>> + reg = <0 0xe0168000 0 0x1000>;
>> + #clock-cells = <1>;
>> + };
>> +
> There is no fixed rate clock like losc?
losc is 32k, I will add it
>> reserved-memory {
>> #address-cells = <2>;
>> #size-cells = <2>;
>> @@ -129,6 +136,7 @@
>> compatible = "actions,s900-uart", "actions,owl-uart";
>> reg = <0x0 0xe0126000 0x0 0x2000>;
>> interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&clock CLK_UART3>;
>> status = "disabled";
>> };
>>
>> diff --git a/include/dt-bindings/clock/actions,s700-cmu.h b/include/dt-bindings/clock/actions,s700-cmu.h
>> new file mode 100644
>> index 000000000000..e5b4ea130953
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/actions,s700-cmu.h
>> @@ -0,0 +1,128 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Actions S700 clock driver
>> + *
>> + * Copyright (c) 2014 Actions Semi Inc.
>> + * Author: David Liu <liuwei@actions-semi.com>
>> + *
>> + * Author: Pathiban Nallathambi <pn@denx.de>
>> + * Author: Saravanan Sekar <sravanhome@gmail.com>
>> + */
>> +
>> +#ifndef __DT_BINDINGS_CLOCK_S700_H
>> +#define __DT_BINDINGS_CLOCK_S700_H
>> +
>> +#define CLK_NONE 0
>> +
>> +/* fixed rate clocks */
>> +#define CLK_LOSC 1
>> +#define CLK_HOSC 2
>> +
>> +/* pll clocks */
>> +#define CLK_CORE_PLL 3
>> +#define CLK_DEV_PLL 4
>> +#define CLK_DDR_PLL 5
>> +#define CLK_NAND_PLL 6
>> +#define CLK_DISPLAY_PLL 7
>> +#define CLK_TVOUT_PLL 8
>> +#define CLK_CVBS_PLL 9
>> +#define CLK_AUDIO_PLL 10
>> +#define CLK_ETHERNET_PLL 11
>> +
> Remove extra new line please.
>
>> +
>> +/* system clock */
>> +#define CLK_SYS_BASE 12
>> +#define CLK_CPU CLK_SYS_BASE
>> +#define CLK_DEV (CLK_SYS_BASE+1)
>> +#define CLK_AHB (CLK_SYS_BASE+2)
>> +#define CLK_APB (CLK_SYS_BASE+3)
>> +#define CLK_DMAC (CLK_SYS_BASE+4)
>> +#define CLK_NOC0_CLK_MUX (CLK_SYS_BASE+5)
>> +#define CLK_NOC1_CLK_MUX (CLK_SYS_BASE+6)
>> +#define CLK_HP_CLK_MUX (CLK_SYS_BASE+7)
>> +#define CLK_HP_CLK_DIV (CLK_SYS_BASE+8)
>> +#define CLK_NOC1_CLK_DIV (CLK_SYS_BASE+9)
>> +#define CLK_NOC0 (CLK_SYS_BASE+10)
>> +#define CLK_NOC1 (CLK_SYS_BASE+11)
>> +#define CLK_SENOR_SRC (CLK_SYS_BASE+12)
>> +
>> +/* peripheral device clock */
>> +#define CLK_PERIP_BASE 25
>> +#define CLK_GPIO (CLK_PERIP_BASE)
>> +#define CLK_TIMER (CLK_PERIP_BASE+1)
>> +#define CLK_DSI (CLK_PERIP_BASE+2)
>> +#define CLK_CSI (CLK_PERIP_BASE+3)
>> +#define CLK_SI (CLK_PERIP_BASE+4)
>> +#define CLK_DE (CLK_PERIP_BASE+5)
>> +#define CLK_HDE (CLK_PERIP_BASE+6)
>> +#define CLK_VDE (CLK_PERIP_BASE+7)
>> +#define CLK_VCE (CLK_PERIP_BASE+8)
>> +#define CLK_NAND (CLK_PERIP_BASE+9)
>> +#define CLK_SD0 (CLK_PERIP_BASE+10)
>> +#define CLK_SD1 (CLK_PERIP_BASE+11)
>> +#define CLK_SD2 (CLK_PERIP_BASE+12)
>> +
>> +#define CLK_UART0 (CLK_PERIP_BASE+13)
>> +#define CLK_UART1 (CLK_PERIP_BASE+14)
>> +#define CLK_UART2 (CLK_PERIP_BASE+15)
>> +#define CLK_UART3 (CLK_PERIP_BASE+16)
>> +#define CLK_UART4 (CLK_PERIP_BASE+17)
>> +#define CLK_UART5 (CLK_PERIP_BASE+18)
>> +#define CLK_UART6 (CLK_PERIP_BASE+19)
>> +
>> +#define CLK_PWM0 (CLK_PERIP_BASE+20)
>> +#define CLK_PWM1 (CLK_PERIP_BASE+21)
>> +#define CLK_PWM2 (CLK_PERIP_BASE+22)
>> +#define CLK_PWM3 (CLK_PERIP_BASE+23)
>> +#define CLK_PWM4 (CLK_PERIP_BASE+24)
>> +#define CLK_PWM5 (CLK_PERIP_BASE+25)
>> +#define CLK_GPU3D (CLK_PERIP_BASE+26)
>> +
>> +#define CLK_I2C0 (CLK_PERIP_BASE+27)
>> +#define CLK_I2C1 (CLK_PERIP_BASE+28)
>> +#define CLK_I2C2 (CLK_PERIP_BASE+29)
>> +#define CLK_I2C3 (CLK_PERIP_BASE+30)
>> +
>> +
>> +#define CLK_SPI0 (CLK_PERIP_BASE+31)
>> +#define CLK_SPI1 (CLK_PERIP_BASE+32)
>> +#define CLK_SPI2 (CLK_PERIP_BASE+33)
>> +#define CLK_SPI3 (CLK_PERIP_BASE+34)
>> +
>> +#define CLK_USB3_480MPLL0 (CLK_PERIP_BASE+35)
>> +#define CLK_USB3_480MPHY0 (CLK_PERIP_BASE+36)
>> +#define CLK_USB3_5GPHY (CLK_PERIP_BASE+37)
>> +#define CLK_USB3_CCE (CLK_PERIP_BASE+48)
>> +#define CLK_USB3_MAC (CLK_PERIP_BASE+49)
>> +
>> +
>> +#define CLK_LCD (CLK_PERIP_BASE+50)
>> +#define CLK_HDMI_AUDIO (CLK_PERIP_BASE+51)
>> +#define CLK_I2SRX (CLK_PERIP_BASE+52)
>> +#define CLK_I2STX (CLK_PERIP_BASE+53)
>> +
>> +#define CLK_SENSOR0 (CLK_PERIP_BASE+54)
>> +#define CLK_SENSOR1 (CLK_PERIP_BASE+55)
>> +
>> +#define CLK_HDMI_DEV (CLK_PERIP_BASE+56)
>> +
>> +#define CLK_ETHERNET (CLK_PERIP_BASE+59)
>> +#define CLK_RMII_REF (CLK_PERIP_BASE+60)
>> +
>> +#define CLK_USB2H0_PLLEN (CLK_PERIP_BASE+61)
>> +#define CLK_USB2H0_PHY (CLK_PERIP_BASE+62)
>> +#define CLK_USB2H0_CCE (CLK_PERIP_BASE+63)
>> +#define CLK_USB2H1_PLLEN (CLK_PERIP_BASE+64)
>> +#define CLK_USB2H1_PHY (CLK_PERIP_BASE+65)
>> +#define CLK_USB2H1_CCE (CLK_PERIP_BASE+66)
>> +
>> +
>> +#define CLK_TVOUT (CLK_PERIP_BASE+67)
>> +
>> +#define CLK_THERMAL_SENSOR (CLK_PERIP_BASE+68)
>> +
>> +#define CLK_IRC_SWITCH (CLK_PERIP_BASE+69)
>> +#define CLK_PCM1 (CLK_PERIP_BASE+70)
>> +#define CLK_NR_CLKS (CLK_PCM1) /* update on adding new clk */
>> +
> Since the index starts from 0, CLK_NR_CLKS should be CLK_PCM1 + 1
0 is for CLK_NONE, so actual clock starts from 1
> Thanks,
> Mani
>
>> +#endif /* __DT_BINDINGS_CLOCK_S700_H */
>> --
>> 2.18.0
>>
next prev parent reply other threads:[~2018-07-01 17:50 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-26 19:28 [PATCH 0/2] Add clock driver for Actions S700 SoC Saravanan Sekar
2018-06-26 19:28 ` [PATCH 1/2] arm64: dts: actions: Enable clock controller for S700 Saravanan Sekar
2018-06-26 19:28 ` [PATCH 2/2] clk: actions: Add S700 SoC clock support Saravanan Sekar
2018-06-27 6:06 ` kbuild test robot
2018-06-27 6:06 ` kbuild test robot
2018-06-28 19:18 ` [PATCH v2 0/3] Add clock driver for Actions S700 SoC Saravanan Sekar
2018-06-28 19:18 ` [PATCH v2 1/3] arm64: dts: actions: Enable clock controller for S700 Saravanan Sekar
2018-06-29 17:36 ` Stephen Boyd
2018-06-29 17:38 ` Andreas Färber
2018-07-01 16:50 ` Saravanan Sekar
2018-06-30 9:42 ` Manivannan Sadhasivam
2018-07-01 17:50 ` Saravanan Sekar [this message]
2018-07-02 2:33 ` Manivannan Sadhasivam
2018-06-28 19:18 ` [PATCH v2 2/3] clk: actions: Add S700 SoC clock support Saravanan Sekar
2018-06-30 9:22 ` Manivannan Sadhasivam
2018-07-01 17:23 ` Saravanan Sekar
2018-07-01 17:30 ` Manivannan Sadhasivam
2018-07-01 17:52 ` Saravanan Sekar
2018-06-28 19:18 ` [PATCH v2 3/3] dt-bindings: clock: Modify Actions Soc clock bindings Saravanan Sekar
2018-06-30 9:32 ` Manivannan Sadhasivam
2018-07-01 17:26 ` Saravanan Sekar
2018-07-01 17:37 ` Manivannan Sadhasivam
2018-07-01 17:54 ` Saravanan Sekar
2018-07-01 17:58 ` Andreas Färber
2018-07-02 2:02 ` Manivannan Sadhasivam
2018-06-29 17:38 ` [PATCH v2 0/3] Add clock driver for Actions S700 SoC Stephen Boyd
2018-07-01 16:53 ` Saravanan Sekar
2018-07-01 18:05 ` Andreas Färber
2018-07-01 18:24 ` Parthiban Nallathambi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=279840d3-a254-394d-7782-b3f837c59e57@gmail.com \
--to=sravanhome@gmail.com \
--cc=afaerber@suse.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=pn@denx.de \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=will.deacon@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox