Re: [PATCH v2 10/11] clk: qcom: camcc-sc8180x: Add missing HW_CTRL GDSC flag

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 3/12/26 12:12 PM, Val Packett wrote:
> In all other Qualcomm SoC camcc drivers, the BPS and IPE GDSCs use the
> HW_CTRL flag, but it was missing on SC8180X.
> 
> Fix by setting it on all applicable GDSC entries.
> 
> Fixes: 691f3413baa4 ("clk: qcom: camcc-sc8180x: Add SC8180X camera clock controller driver")
> Signed-off-by: Val Packett <val@packett.cool>
> ---
>  drivers/clk/qcom/camcc-sc8180x.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/clk/qcom/camcc-sc8180x.c b/drivers/clk/qcom/camcc-sc8180x.c
> index cd4c40a81c28..67b2055bd212 100644
> --- a/drivers/clk/qcom/camcc-sc8180x.c
> +++ b/drivers/clk/qcom/camcc-sc8180x.c
> @@ -2555,7 +2555,7 @@ static struct gdsc bps_gdsc = {
>  	},
>  	.pwrsts = PWRSTS_OFF_ON,
>  	.parent = &titan_top_gdsc.pd,
> -	.flags = POLL_CFG_GDSCR,
> +	.flags = HW_CTRL | POLL_CFG_GDSCR,

FWIW downstream seems to use HW_MODE at runtime and SW_MODE+collapse on
suspend for both BPS and IPE, so perhaps HW_CTRL_TRIGGER (and a patch to
the driver) would be better suited

Konrad