public inbox for linux-clk@vger.kernel.org
 help / color / mirror / Atom feed
From: "Jernej Škrabec" <jernej.skrabec@gmail.com>
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
	Thomas Zimmermann <tzimmermann@suse.de>,
	David Airlie <airlied@gmail.com>, Daniel Vetter <daniel@ffwll.ch>,
	Samuel Holland <samuel@sholland.org>,
	Rob Herring <robh@kernel.org>,
	Krzysztof Kozlowski <krzk+dt@kernel.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Ryan Walklin <ryan@testtoast.com>
Cc: Andre Przywara <andre.przywara@arm.com>,
	Chris Morgan <macroalpha82@gmail.com>,
	Hironori KIKUCHI <kikuchan98@gmail.com>,
	Philippe Simons <simons.philippe@gmail.com>,
	Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
	dri-devel@lists.freedesktop.org,
	linux-arm-kernel@lists.infradead.org,
	linux-sunxi@lists.linux.dev, devicetree@vger.kernel.org,
	linux-clk@vger.kernel.org, Ryan Walklin <ryan@testtoast.com>
Subject: Re: [PATCH v7 08/27] drm: sun4i: de3: add YUV support to the DE3 mixer
Date: Sat, 22 Feb 2025 10:30:35 +0100	[thread overview]
Message-ID: <3860147.kQq0lBPeGt@jernej-laptop> (raw)
In-Reply-To: <20250216183710.8443-9-ryan@testtoast.com>

Dne nedelja, 16. februar 2025 ob 19:36:08 Srednjeevropski standardni čas je Ryan Walklin napisal(a):
> From: Jernej Skrabec <jernej.skrabec@gmail.com>
> 
> The mixer in the DE3 display engine supports YUV 8 and 10 bit
> formats in addition to 8-bit RGB. Add the required register
> configuration and format enumeration callback functions to the mixer,
> and store the in-use output format (defaulting to RGB) and color
> encoding in the mixer configuration.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
> Signed-off-by: Ryan Walklin <ryan@testtoast.com>
> 
> ---
> Changelog v4..v5:
> - Remove trailing whitespace
> 
> Changelog v5..v6:
> - Move color format and encoding flags to mixer and add struct.
> ---
>  drivers/gpu/drm/sun4i/sun8i_mixer.c | 54 +++++++++++++++++++++++++++--
>  drivers/gpu/drm/sun4i/sun8i_mixer.h | 11 ++++++
>  2 files changed, 62 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> index a170f68708b1f..bc934186bfd6f 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> @@ -23,7 +23,10 @@
>  #include <drm/drm_gem_dma_helper.h>
>  #include <drm/drm_probe_helper.h>
>  
> +#include <uapi/linux/media-bus-format.h>
> +
>  #include "sun4i_drv.h"
> +#include "sun50i_fmt.h"
>  #include "sun8i_mixer.h"
>  #include "sun8i_ui_layer.h"
>  #include "sun8i_vi_layer.h"
> @@ -390,12 +393,52 @@ static void sun8i_mixer_mode_set(struct sunxi_engine *engine,
>  
>  	DRM_DEBUG_DRIVER("Switching display mixer interlaced mode %s\n",
>  			 interlaced ? "on" : "off");
> +
> +	if (mixer->color_model.format == MEDIA_BUS_FMT_RGB888_1X24)
> +		val = SUN8I_MIXER_BLEND_COLOR_BLACK;
> +	else
> +		val = 0xff108080;
> +
> +	regmap_write(mixer->engine.regs,
> +		     SUN8I_MIXER_BLEND_BKCOLOR(bld_base), val);
> +	regmap_write(mixer->engine.regs,
> +		     SUN8I_MIXER_BLEND_ATTR_FCOLOR(bld_base, 0), val);
> +
> +	if (mixer->cfg->has_formatter)
> +		sun50i_fmt_setup(mixer, mode->hdisplay,
> +				 mode->vdisplay, mixer->color_model.format);
> +}
> +
> +static u32 *sun8i_mixer_get_supported_fmts(struct sunxi_engine *engine, u32 *num)
> +{
> +	struct sun8i_mixer *mixer = engine_to_sun8i_mixer(engine);
> +	u32 *formats, count;
> +
> +	count = 0;
> +
> +	formats = kcalloc(5, sizeof(*formats), GFP_KERNEL);
> +	if (!formats)
> +		return NULL;
> +
> +	if (mixer->cfg->has_formatter) {
> +		formats[count++] = MEDIA_BUS_FMT_UYYVYY10_0_5X30;
> +		formats[count++] = MEDIA_BUS_FMT_YUV8_1X24;
> +		formats[count++] = MEDIA_BUS_FMT_UYVY8_1X16;
> +		formats[count++] = MEDIA_BUS_FMT_UYYVYY8_0_5X24;
> +	}
> +
> +	formats[count++] = MEDIA_BUS_FMT_RGB888_1X24;
> +
> +	*num = count;
> +
> +	return formats;
>  }
>  
>  static const struct sunxi_engine_ops sun8i_engine_ops = {
> -	.commit		= sun8i_mixer_commit,
> -	.layers_init	= sun8i_layers_init,
> -	.mode_set	= sun8i_mixer_mode_set,
> +	.commit			= sun8i_mixer_commit,
> +	.layers_init		= sun8i_layers_init,
> +	.mode_set		= sun8i_mixer_mode_set,
> +	.get_supported_fmts	= sun8i_mixer_get_supported_fmts,
>  };
>  
>  static const struct regmap_config sun8i_mixer_regmap_config = {
> @@ -484,6 +527,11 @@ static int sun8i_mixer_bind(struct device *dev, struct device *master,
>  	if (!mixer->cfg)
>  		return -EINVAL;
>  
> +	/* default output format, supported by all mixers */
> +	mixer->color_model.format = MEDIA_BUS_FMT_RGB888_1X24;
> +	/* default color encoding, ignored with RGB I/O */
> +	mixer->color_model.encoding = DRM_COLOR_YCBCR_BT601;
> +
>  	regs = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(regs))
>  		return PTR_ERR(regs);
> diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.h b/drivers/gpu/drm/sun4i/sun8i_mixer.h
> index 8417b8fef2e1f..5f465a974fbdf 100644
> --- a/drivers/gpu/drm/sun4i/sun8i_mixer.h
> +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.h
> @@ -9,6 +9,7 @@
>  #include <linux/clk.h>
>  #include <linux/regmap.h>
>  #include <linux/reset.h>
> +#include <drm/drm_color_mgmt.h>
>  #include <drm/drm_plane.h>
>  
>  #include "sunxi_engine.h"
> @@ -177,6 +178,11 @@ struct sun8i_mixer_cfg {
>  	unsigned int	scanline_yuv;
>  };
>  
> +struct sun8i_color_model {
> +	u32			format;
> +	enum drm_color_encoding	encoding;
> +};
> +
>  struct sun8i_mixer {
>  	struct sunxi_engine		engine;
>  
> @@ -186,6 +192,11 @@ struct sun8i_mixer {
>  
>  	struct clk			*bus_clk;
>  	struct clk			*mod_clk;
> +
> +	struct regmap			*top_regs;
> +	struct regmap			*disp_regs;

This chunk is DE33 specific and should go in patch 24.

Best regards,
Jernej

> +
> +	struct sun8i_color_model	color_model;
>  };
>  
>  enum {
> 





  reply	other threads:[~2025-02-22  9:30 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-16 18:36 [PATCH v7 02/27] drm: sun4i: de2/de3: Merge CSC functions into one Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 03/27] drm: sun4i: de2/de3: call csc setup also for UI layer Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 04/27] drm: sun4i: de2: Initialize layer fields earlier Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 05/27] drm: sun4i: de3: Add YUV formatter module Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 06/27] drm: sun4i: de3: add format enumeration function to engine Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 07/27] drm: sun4i: de3: add formatter flag to mixer config Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 08/27] drm: sun4i: de3: add YUV support to the DE3 mixer Ryan Walklin
2025-02-22  9:30   ` Jernej Škrabec [this message]
2025-02-22 23:36     ` Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 09/27] drm: sun4i: de3: refactor YUV formatter module setup Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 10/27] drm: sun4i: de3: pass mixer reference to ccsc setup function Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 11/27] drm: sun4i: de3: add YUV support to the color space correction module Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 12/27] drm: sun4i: de3: add YUV support to the TCON Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 13/27] drm: sun4i: support YUV formats in VI scaler Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 14/27] drm: sun4i: de2/de3: add mixer version enum Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 15/27] drm: sun4i: de2/de3: refactor mixer initialisation Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 16/27] drm: sun4i: vi_scaler refactor vi_scaler enablement Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 17/27] drm: sun4i: de2/de3: add generic blender register reference function Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 18/27] drm: sun4i: de2/de3: use generic register reference function for layer configuration Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 19/27] drm: sun4i: de3: Implement AFBC support Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 20/27] dt-bindings: allwinner: add H616 DE33 bus binding Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 21/27] dt-bindings: allwinner: add H616 DE33 clock binding Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 22/27] dt-bindings: allwinner: add H616 DE33 mixer binding Ryan Walklin
2025-02-24 17:56   ` Andre Przywara
2025-03-10  9:30     ` Ryan Walklin
2025-03-10 10:48       ` Andre Przywara
2025-02-16 18:36 ` [PATCH v7 23/27] clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 24/27] drm: sun4i: de33: mixer: " Ryan Walklin
2025-02-23  7:15   ` Jernej Škrabec
2025-02-23  7:32     ` Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 25/27] drm: sun4i: de33: vi_scaler: " Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 26/27] drm: sun4i: de33: fmt: " Ryan Walklin
2025-02-16 18:36 ` [PATCH v7 27/27] drm: sun4i: de33: csc: " Ryan Walklin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=3860147.kQq0lBPeGt@jernej-laptop \
    --to=jernej.skrabec@gmail.com \
    --cc=airlied@gmail.com \
    --cc=andre.przywara@arm.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kikuchan98@gmail.com \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=maarten.lankhorst@linux.intel.com \
    --cc=macroalpha82@gmail.com \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh@kernel.org \
    --cc=ryan@testtoast.com \
    --cc=samuel@sholland.org \
    --cc=sboyd@kernel.org \
    --cc=simons.philippe@gmail.com \
    --cc=tzimmermann@suse.de \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox