Linux clock framework development
 help / color / mirror / Atom feed
From: Jacob Keller <jacob.e.keller@intel.com>
To: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	"Emil Renner Berthing" <kernel@esmil.dk>,
	Samin Guo <samin.guo@starfivetech.com>,
	Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Hal Feng <hal.feng@starfivetech.com>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	Richard Cochran <richardcochran@gmail.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-riscv@lists.infradead.org>,
	<linux-clk@vger.kernel.org>,
	<linux-stm32@st-md-mailman.stormreply.com>,
	<linux-arm-kernel@lists.infradead.org>, <kernel@collabora.com>
Subject: Re: [PATCH v4 0/9] Enable networking support for StarFive JH7100 SoC
Date: Mon, 18 Dec 2023 14:53:21 -0800	[thread overview]
Message-ID: <453e0abd-30a4-4abd-b5ae-63d9982ec1b8@intel.com> (raw)
In-Reply-To: <20231218214451.2345691-1-cristian.ciocaltea@collabora.com>



On 12/18/2023 1:44 PM, Cristian Ciocaltea wrote:
> This patch series adds ethernet support for the StarFive JH7100 SoC and makes it
> available for the StarFive VisionFive V1 and BeagleV Starlight boards, although
> I could only validate on the former SBC.  Thank you Emil and Geert for helping
> with tests on BeagleV!
> 
> The work is heavily based on the reference implementation [1] and depends on the
> SiFive Composable Cache controller and non-coherent DMA support provided by Emil
> via [2] and [3].
> 
> *Update*: as of next-20231214, all dependencies have been merged.
> 
> [1] https://github.com/starfive-tech/linux/commits/visionfive
> [2] https://lore.kernel.org/all/CAJM55Z_pdoGxRXbmBgJ5GbVWyeM1N6+LHihbNdT26Oo_qA5VYA@mail.gmail.com/
> [3] https://lore.kernel.org/all/20231130151932.729708-1-emil.renner.berthing@canonical.com/
> 

I'm not super familiar with how the various pieces fit together, so I'm
not sure how valuable my read through is.. but I didn't see anything
obviously wrong.

For the series:

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>

> Changes in v4:
>  - Restricted double usage of 'ahb' reset name in PATCH 2 (Jessica, Samuel)
>  - Moved phy reference from PATCH 5 to both PATCH 6 & 7 where the node is
>    actually defined (Emil, Conor)
>  - Drop unnecessary gpio include in PATCH 6; also added a DTS comment describing
>    the rational behind RX internal delay adjustment (Andrew)
>  - v3:
>    https://lore.kernel.org/lkml/20231215204050.2296404-1-cristian.ciocaltea@collabora.com/
> 
> Changes in v3:
>  - Rebased series onto next-20231214 and dropped the ccache & DMA coherency
>    related patches (v2 06-08/12) handled by Emil via [3]
>  - Squashed PATCH v2 01/12 into PATCH v3 2/9, per Krzysztof's review
>  - Dropped incorrect PATCH v2 02/12
>  - Incorporated Emil's feedback; also added his Co-developed-by on all dts
>    patches
>  - Documented the need of adjusting RX internal delay in PATCH v3 8/9, per
>    Andrew's request
>  - Added clock fixes from Emil (PATCH v3 8-9/9) required to support 10/100Mb
>    link speeds
>  - v2:
>    https://lore.kernel.org/lkml/20231029042712.520010-1-cristian.ciocaltea@collabora.com/
> 
> Changes in v2:
>  - Dropped ccache PATCH 01-05 reworked by Emil via [2]
>  - Dropped already applied PATCH 06/12
>  - Added PATCH v2 01 to prepare snps-dwmac binding for JH7100 support
>  - Added PATCH v2 02-03 to provide some jh7110-dwmac binding optimizations
>  - Handled JH7110 conflicting work in PATCH 07 via PATCH v2 04
>  - Reworked PATCH 8 via PATCH v2 05, adding JH7100 quirk and dropped
>    starfive,gtxclk-dlychain DT property; also fixed register naming
>  - Added PATCH v2 08 providing DMA coherency related DT changes
>  - Updated PATCH 9 commit msg:
>    s/OF_DMA_DEFAULT_COHERENT/ARCH_DMA_DEFAULT_COHERENT/
>  - Replaced 'uncached-offset' property with 'sifive,cache-ops' in PATCH 10/12
>    and dropped 'sideband' reg
>  - Add new patch providing coherent DMA memory pool (PATCH v2 10)
>  - Updated PATCH 11/12 according to the stmmac glue layer changes in upstream
>  - Split PATCH 12/12 into PATCH v2 10-12 to handle individual gmac setup of
>    VisionFive v1 and BeagleV boards as they use different PHYs; also switched
>    phy-mode from "rgmii-tx" to "rgmii-id" (requires a reduction of
>    rx-internal-delay-ps by ~50%)
>  - Rebased series onto next-20231024
>  - v1:
>    https://lore.kernel.org/lkml/20230211031821.976408-1-cristian.ciocaltea@collabora.com/
> 
> Cristian Ciocaltea (7):
>   dt-bindings: net: starfive,jh7110-dwmac: Drop redundant reset
>     description
>   dt-bindings: net: starfive,jh7110-dwmac: Add JH7100 SoC compatible
>   net: stmmac: dwmac-starfive: Add support for JH7100 SoC
>   riscv: dts: starfive: jh7100: Add sysmain and gmac DT nodes
>   riscv: dts: starfive: jh7100-common: Setup pinmux and enable gmac
>   riscv: dts: starfive: visionfive-v1: Setup ethernet phy
>   riscv: dts: starfive: beaglev-starlight: Setup phy reset gpio
> 
> Emil Renner Berthing (2):
>   clk: starfive: Add flags argument to JH71X0__MUX macro
>   clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx
> 
>  .../devicetree/bindings/net/snps,dwmac.yaml   | 11 ++-
>  .../bindings/net/starfive,jh7110-dwmac.yaml   | 75 ++++++++++++-----
>  .../dts/starfive/jh7100-beaglev-starlight.dts | 11 +++
>  .../boot/dts/starfive/jh7100-common.dtsi      | 84 +++++++++++++++++++
>  .../jh7100-starfive-visionfive-v1.dts         | 22 ++++-
>  arch/riscv/boot/dts/starfive/jh7100.dtsi      | 36 ++++++++
>  .../clk/starfive/clk-starfive-jh7100-audio.c  |  2 +-
>  drivers/clk/starfive/clk-starfive-jh7100.c    | 32 +++----
>  .../clk/starfive/clk-starfive-jh7110-aon.c    |  6 +-
>  .../clk/starfive/clk-starfive-jh7110-isp.c    |  2 +-
>  .../clk/starfive/clk-starfive-jh7110-sys.c    | 26 +++---
>  drivers/clk/starfive/clk-starfive-jh71x0.h    |  4 +-
>  drivers/net/ethernet/stmicro/stmmac/Kconfig   |  6 +-
>  .../ethernet/stmicro/stmmac/dwmac-starfive.c  | 32 ++++++-
>  14 files changed, 280 insertions(+), 69 deletions(-)
> 

  parent reply	other threads:[~2023-12-18 22:53 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-18 21:44 [PATCH v4 0/9] Enable networking support for StarFive JH7100 SoC Cristian Ciocaltea
2023-12-18 21:44 ` [PATCH v4 1/9] dt-bindings: net: starfive,jh7110-dwmac: Drop redundant reset description Cristian Ciocaltea
2023-12-19  7:24   ` Krzysztof Kozlowski
2023-12-19 12:55     ` Cristian Ciocaltea
2023-12-19 13:22       ` Krzysztof Kozlowski
2023-12-18 21:44 ` [PATCH v4 2/9] dt-bindings: net: starfive,jh7110-dwmac: Add JH7100 SoC compatible Cristian Ciocaltea
2023-12-19  7:27   ` Krzysztof Kozlowski
2023-12-19 12:49     ` Cristian Ciocaltea
2023-12-19 13:19       ` Krzysztof Kozlowski
2023-12-19 13:36         ` Cristian Ciocaltea
2023-12-18 21:44 ` [PATCH v4 3/9] net: stmmac: dwmac-starfive: Add support for JH7100 SoC Cristian Ciocaltea
2023-12-19  9:04   ` Andrew Lunn
2023-12-18 21:44 ` [PATCH v4 4/9] riscv: dts: starfive: jh7100: Add sysmain and gmac DT nodes Cristian Ciocaltea
2023-12-18 21:44 ` [PATCH v4 5/9] riscv: dts: starfive: jh7100-common: Setup pinmux and enable gmac Cristian Ciocaltea
2023-12-18 21:44 ` [PATCH v4 6/9] riscv: dts: starfive: visionfive-v1: Setup ethernet phy Cristian Ciocaltea
2023-12-19  8:58   ` Andrew Lunn
2023-12-18 21:44 ` [PATCH v4 7/9] riscv: dts: starfive: beaglev-starlight: Setup phy reset gpio Cristian Ciocaltea
2023-12-18 21:44 ` [PATCH v4 8/9] clk: starfive: Add flags argument to JH71X0__MUX macro Cristian Ciocaltea
2023-12-18 21:44 ` [PATCH v4 9/9] clk: starfive: jh7100: Add CLK_SET_RATE_PARENT to gmac_tx Cristian Ciocaltea
2023-12-18 22:53 ` Jacob Keller [this message]
2023-12-18 22:59   ` [PATCH v4 0/9] Enable networking support for StarFive JH7100 SoC Cristian Ciocaltea
2023-12-19  9:03 ` Andrew Lunn
2023-12-19 13:20   ` Cristian Ciocaltea

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=453e0abd-30a4-4abd-b5ae-63d9982ec1b8@intel.com \
    --to=jacob.e.keller@intel.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor+dt@kernel.org \
    --cc=cristian.ciocaltea@collabora.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=hal.feng@starfivetech.com \
    --cc=joabreu@synopsys.com \
    --cc=kernel@collabora.com \
    --cc=kernel@esmil.dk \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mturquette@baylibre.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=peppe.cavallaro@st.com \
    --cc=richardcochran@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=samin.guo@starfivetech.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox