From: Taniya Das <tdas@codeaurora.org>
To: Vinod Koul <vkoul@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>,
linux-arm-msm@vger.kernel.org,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Deepak Katragadda <dkatraga@codeaurora.org>,
Andy Gross <agross@kernel.org>,
David Brown <david.brown@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
linux-clk@vger.kernel.org
Subject: Re: [PATCH v2 4/5] clk: qcom: clk-alpha-pll: Add support for Trion PLLs
Date: Mon, 17 Jun 2019 11:40:46 +0530 [thread overview]
Message-ID: <51ec56b7-a276-67e6-c196-ac80281c65e1@codeaurora.org> (raw)
In-Reply-To: <20190614054201.GA2962@vkoul-mobl>
Hi Vinod,
On 6/14/2019 11:12 AM, Vinod Koul wrote:
> Hi Taniya,
>
> On 13-06-19, 08:34, Taniya Das wrote:
>> Hi Vinod,
>>
>> The trion PLL needs to be configured before it is enabled. The PLL cannot
>> LOCK without the calibration.
>>
>> Could you please add "clk_trion_pll_configure()" function?
>
> First it is not recommended to top post! Please reply inline.
>
> Yes I did see that, I will check that. Is there any way to find PLL is
> configured or not? I want to avoid using inited variable as done in
> downstream.
>
These PLLs which are controlled by High Level OS would not be configured
and we should not rely on the configurations which are done previously
for these PLLs.
> Thanks
>
>> On 6/12/2019 2:47 PM, Vinod Koul wrote:
>>> From: Deepak Katragadda <dkatraga@codeaurora.org>
>>>
>>> Add programming sequence support for managing the Trion
>>> PLLs.
>>>
>>> Signed-off-by: Deepak Katragadda <dkatraga@codeaurora.org>
>>> Signed-off-by: Taniya Das <tdas@codeaurora.org>
>>> [vkoul: Fix style and format issues
>>> convert to use pll type infrastructure
>>> remove unnecessary checks in code
>>> remove unused code]
>>> Signed-off-by: Vinod Koul <vkoul@kernel.org>
>>> ---
>>> drivers/clk/qcom/clk-alpha-pll.c | 228 +++++++++++++++++++++++++++++++
>>> drivers/clk/qcom/clk-alpha-pll.h | 7 +
>>> 2 files changed, 235 insertions(+)
>>>
>>> diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
>>> index 2c6773188761..30210f5c6726 100644
>>> --- a/drivers/clk/qcom/clk-alpha-pll.c
>>> +++ b/drivers/clk/qcom/clk-alpha-pll.c
>>> @@ -32,6 +32,7 @@
>>> # define PLL_LOCK_DET BIT(31)
>>> #define PLL_L_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_L_VAL])
>>> +#define PLL_CAL_L_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_CAL_L_VAL])
>>> #define PLL_ALPHA_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_ALPHA_VAL])
>>> #define PLL_ALPHA_VAL_U(p) ((p)->offset + (p)->regs[PLL_OFF_ALPHA_VAL_U])
>>> @@ -44,14 +45,17 @@
>>> # define PLL_VCO_MASK 0x3
>>> #define PLL_USER_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_USER_CTL_U])
>>> +#define PLL_USER_CTL_U1(p) ((p)->offset + (p)->regs[PLL_OFF_USER_CTL_U1])
>>> #define PLL_CONFIG_CTL(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL])
>>> #define PLL_CONFIG_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL_U])
>>> +#define PLL_CONFIG_CTL_U1(p) ((p)->offset + (p)->regs[PLL_OFF_CONFIG_CTL_U11])
>>> #define PLL_TEST_CTL(p) ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL])
>>> #define PLL_TEST_CTL_U(p) ((p)->offset + (p)->regs[PLL_OFF_TEST_CTL_U])
>>> #define PLL_STATUS(p) ((p)->offset + (p)->regs[PLL_OFF_STATUS])
>>> #define PLL_OPMODE(p) ((p)->offset + (p)->regs[PLL_OFF_OPMODE])
>>> #define PLL_FRAC(p) ((p)->offset + (p)->regs[PLL_OFF_FRAC])
>>> +#define PLL_CAL_VAL(p) ((p)->offset + (p)->regs[PLL_OFF_CAL_VAL])
>>> const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
>>> [CLK_ALPHA_PLL_TYPE_DEFAULT] = {
>>> @@ -96,6 +100,22 @@ const u8 clk_alpha_pll_regs[][PLL_OFF_MAX_REGS] = {
>>> [PLL_OFF_OPMODE] = 0x2c,
>>> [PLL_OFF_FRAC] = 0x38,
>>> },
>>> + [CLK_ALPHA_PLL_TYPE_TRION] = {
>>> + [PLL_OFF_L_VAL] = 0x04,
>>> + [PLL_OFF_CAL_L_VAL] = 0x08,
>>> + [PLL_OFF_USER_CTL] = 0x0c,
>>> + [PLL_OFF_USER_CTL_U] = 0x10,
>>> + [PLL_OFF_USER_CTL_U1] = 0x14,
>>> + [PLL_OFF_CONFIG_CTL] = 0x18,
>>> + [PLL_OFF_CONFIG_CTL_U] = 0x1c,
>>> + [PLL_OFF_CONFIG_CTL_U1] = 0x20,
>>> + [PLL_OFF_TEST_CTL] = 0x24,
>>> + [PLL_OFF_TEST_CTL_U] = 0x28,
>>> + [PLL_OFF_STATUS] = 0x30,
>>> + [PLL_OFF_OPMODE] = 0x38,
>>> + [PLL_OFF_ALPHA_VAL] = 0x40,
>>> + [PLL_OFF_CAL_VAL] = 0x44,
>>> + },
>>> };
>>> EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>>> @@ -120,6 +140,10 @@ EXPORT_SYMBOL_GPL(clk_alpha_pll_regs);
>>> #define FABIA_PLL_OUT_MASK 0x7
>>> #define FABIA_PLL_RATE_MARGIN 500
>>> +#define TRION_PLL_STANDBY 0x0
>>> +#define TRION_PLL_RUN 0x1
>>> +#define TRION_PLL_OUT_MASK 0x7
>>> +
>>> #define pll_alpha_width(p) \
>>> ((PLL_ALPHA_VAL_U(p) - PLL_ALPHA_VAL(p) == 4) ? \
>>> ALPHA_REG_BITWIDTH : ALPHA_REG_16BIT_WIDTH)
>>> @@ -730,6 +754,130 @@ static long alpha_pll_huayra_round_rate(struct clk_hw *hw, unsigned long rate,
>>> return alpha_huayra_pll_round_rate(rate, *prate, &l, &a);
>>> }
>>> +static int trion_pll_is_enabled(struct clk_alpha_pll *pll,
>>> + struct regmap *regmap)
>>> +{
>>> + u32 mode_regval, opmode_regval;
>>> + int ret;
>>> +
>>> + ret = regmap_read(regmap, PLL_MODE(pll), &mode_regval);
>>> + ret |= regmap_read(regmap, PLL_OPMODE(pll), &opmode_regval);
>>> + if (ret)
>>> + return 0;
>>> +
>>> + return ((opmode_regval & TRION_PLL_RUN) && (mode_regval & PLL_OUTCTRL));
>>> +}
>>> +
>>> +static int clk_trion_pll_is_enabled(struct clk_hw *hw)
>>> +{
>>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> +
>>> + return trion_pll_is_enabled(pll, pll->clkr.regmap);
>>> +}
>>> +
>>> +static int clk_trion_pll_enable(struct clk_hw *hw)
>>> +{
>>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> + struct regmap *regmap = pll->clkr.regmap;
>>> + u32 val;
>>> + int ret;
>>> +
>>> + ret = regmap_read(regmap, PLL_MODE(pll), &val);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /* If in FSM mode, just vote for it */
>>> + if (val & PLL_VOTE_FSM_ENA) {
>>> + ret = clk_enable_regmap(hw);
>>> + if (ret)
>>> + return ret;
>>> + return wait_for_pll_enable_active(pll);
>>> + }
>>> +
>>> + /* Set operation mode to RUN */
>>> + regmap_write(regmap, PLL_OPMODE(pll), TRION_PLL_RUN);
>>> +
>>> + ret = wait_for_pll_enable_lock(pll);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /* Enable the PLL outputs */
>>> + ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
>>> + TRION_PLL_OUT_MASK, TRION_PLL_OUT_MASK);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + /* Enable the global PLL outputs */
>>> + return regmap_update_bits(regmap, PLL_MODE(pll),
>>> + PLL_OUTCTRL, PLL_OUTCTRL);
>>> +}
>>> +
>>> +static void clk_trion_pll_disable(struct clk_hw *hw)
>>> +{
>>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> + struct regmap *regmap = pll->clkr.regmap;
>>> + u32 val;
>>> + int ret;
>>> +
>>> + ret = regmap_read(regmap, PLL_MODE(pll), &val);
>>> + if (ret)
>>> + return;
>>> +
>>> + /* If in FSM mode, just unvote it */
>>> + if (val & PLL_VOTE_FSM_ENA) {
>>> + clk_disable_regmap(hw);
>>> + return;
>>> + }
>>> +
>>> + /* Disable the global PLL output */
>>> + ret = regmap_update_bits(regmap, PLL_MODE(pll), PLL_OUTCTRL, 0);
>>> + if (ret)
>>> + return;
>>> +
>>> + /* Disable the PLL outputs */
>>> + ret = regmap_update_bits(regmap, PLL_USER_CTL(pll),
>>> + TRION_PLL_OUT_MASK, 0);
>>> + if (ret)
>>> + return;
>>> +
>>> + /* Place the PLL mode in STANDBY */
>>> + regmap_write(regmap, PLL_OPMODE(pll), TRION_PLL_STANDBY);
>>> + regmap_update_bits(regmap, PLL_MODE(pll), PLL_RESET_N, PLL_RESET_N);
>>> +}
>>> +
>>> +static unsigned long
>>> +clk_trion_pll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
>>> +{
>>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> + struct regmap *regmap = pll->clkr.regmap;
>>> + u32 l, frac;
>>> + u64 prate = parent_rate;
>>> +
>>> + regmap_read(regmap, PLL_L_VAL(pll), &l);
>>> + regmap_read(regmap, PLL_ALPHA_VAL(pll), &frac);
>>> +
>>> + return alpha_pll_calc_rate(prate, l, frac, ALPHA_REG_16BIT_WIDTH);
>>> +}
>>> +
>>> +static long clk_trion_pll_round_rate(struct clk_hw *hw, unsigned long rate,
>>> + unsigned long *prate)
>>> +{
>>> + struct clk_alpha_pll *pll = to_clk_alpha_pll(hw);
>>> + unsigned long min_freq, max_freq;
>>> + u32 l;
>>> + u64 a;
>>> +
>>> + rate = alpha_pll_round_rate(rate, *prate,
>>> + &l, &a, ALPHA_REG_16BIT_WIDTH);
>>> + if (!pll->vco_table || alpha_pll_find_vco(pll, rate))
>>> + return rate;
>>> +
>>> + min_freq = pll->vco_table[0].min_freq;
>>> + max_freq = pll->vco_table[pll->num_vco - 1].max_freq;
>>> +
>>> + return clamp(rate, min_freq, max_freq);
>>> +}
>>> +
>>> const struct clk_ops clk_alpha_pll_ops = {
>>> .enable = clk_alpha_pll_enable,
>>> .disable = clk_alpha_pll_disable,
>>> @@ -760,6 +908,15 @@ const struct clk_ops clk_alpha_pll_hwfsm_ops = {
>>> };
>>> EXPORT_SYMBOL_GPL(clk_alpha_pll_hwfsm_ops);
>>> +const struct clk_ops clk_trion_fixed_pll_ops = {
>>> + .enable = clk_trion_pll_enable,
>>> + .disable = clk_trion_pll_disable,
>>> + .is_enabled = clk_trion_pll_is_enabled,
>>> + .recalc_rate = clk_trion_pll_recalc_rate,
>>> + .round_rate = clk_trion_pll_round_rate,
>>> +};
>>> +EXPORT_SYMBOL_GPL(clk_trion_fixed_pll_ops);
>>> +
>>> static unsigned long
>>> clk_alpha_pll_postdiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
>>> {
>>> @@ -1053,6 +1210,77 @@ static unsigned long clk_alpha_pll_postdiv_fabia_recalc_rate(struct clk_hw *hw,
>>> return (parent_rate / div);
>>> }
>>> +static unsigned long
>>> +clk_trion_pll_postdiv_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
>>> +{
>>> + struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
>>> + struct regmap *regmap = pll->clkr.regmap;
>>> + u32 i, div = 1, val;
>>> +
>>> + regmap_read(regmap, PLL_USER_CTL(pll), &val);
>>> +
>>> + val >>= pll->post_div_shift;
>>> + val &= PLL_POST_DIV_MASK(pll);
>>> +
>>> + for (i = 0; i < pll->num_post_div; i++) {
>>> + if (pll->post_div_table[i].val == val) {
>>> + div = pll->post_div_table[i].div;
>>> + break;
>>> + }
>>> + }
>>> +
>>> + return (parent_rate / div);
>>> +}
>>> +
>>> +static long
>>> +clk_trion_pll_postdiv_round_rate(struct clk_hw *hw, unsigned long rate,
>>> + unsigned long *prate)
>>> +{
>>> + struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
>>> +
>>> + return divider_round_rate(hw, rate, prate, pll->post_div_table,
>>> + pll->width, CLK_DIVIDER_ROUND_CLOSEST);
>>> +};
>>> +
>>> +static int
>>> +clk_trion_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
>>> + unsigned long parent_rate)
>>> +{
>>> + struct clk_alpha_pll_postdiv *pll = to_clk_alpha_pll_postdiv(hw);
>>> + struct regmap *regmap = pll->clkr.regmap;
>>> + int i, val = 0, div, ret;
>>> +
>>> + /*
>>> + * If the PLL is in FSM mode, then treat the set_rate callback
>>> + * as a no-operation.
>>> + */
>>> + ret = regmap_read(regmap, PLL_MODE(pll), &val);
>>> + if (ret)
>>> + return ret;
>>> +
>>> + if (val & PLL_VOTE_FSM_ENA)
>>> + return 0;
>>> +
>>> + div = DIV_ROUND_UP_ULL(parent_rate, rate);
>>> + for (i = 0; i < pll->num_post_div; i++) {
>>> + if (pll->post_div_table[i].div == div) {
>>> + val = pll->post_div_table[i].val;
>>> + break;
>>> + }
>>> + }
>>> +
>>> + return regmap_update_bits(regmap, PLL_USER_CTL(pll),
>>> + PLL_POST_DIV_MASK(pll) << PLL_POST_DIV_SHIFT,
>>> + val << PLL_POST_DIV_SHIFT);
>>> +}
>>> +
>>> +const struct clk_ops clk_trion_pll_postdiv_ops = {
>>> + .recalc_rate = clk_trion_pll_postdiv_recalc_rate,
>>> + .round_rate = clk_trion_pll_postdiv_round_rate,
>>> + .set_rate = clk_trion_pll_postdiv_set_rate,
>>> +};
>>> +EXPORT_SYMBOL_GPL(clk_trion_pll_postdiv_ops);
>>> +
>>> static long clk_alpha_pll_postdiv_fabia_round_rate(struct clk_hw *hw,
>>> unsigned long rate, unsigned long *prate)
>>> {
>>> diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
>>> index 66755f0f84fc..15f27f4b06df 100644
>>> --- a/drivers/clk/qcom/clk-alpha-pll.h
>>> +++ b/drivers/clk/qcom/clk-alpha-pll.h
>>> @@ -13,22 +13,27 @@ enum {
>>> CLK_ALPHA_PLL_TYPE_HUAYRA,
>>> CLK_ALPHA_PLL_TYPE_BRAMMO,
>>> CLK_ALPHA_PLL_TYPE_FABIA,
>>> + CLK_ALPHA_PLL_TYPE_TRION,
>>> CLK_ALPHA_PLL_TYPE_MAX,
>>> };
>>> enum {
>>> PLL_OFF_L_VAL,
>>> + PLL_OFF_CAL_L_VAL,
>>> PLL_OFF_ALPHA_VAL,
>>> PLL_OFF_ALPHA_VAL_U,
>>> PLL_OFF_USER_CTL,
>>> PLL_OFF_USER_CTL_U,
>>> + PLL_OFF_USER_CTL_U1,
>>> PLL_OFF_CONFIG_CTL,
>>> PLL_OFF_CONFIG_CTL_U,
>>> + PLL_OFF_CONFIG_CTL_U1,
>>> PLL_OFF_TEST_CTL,
>>> PLL_OFF_TEST_CTL_U,
>>> PLL_OFF_STATUS,
>>> PLL_OFF_OPMODE,
>>> PLL_OFF_FRAC,
>>> + PLL_OFF_CAL_VAL,
>>> PLL_OFF_MAX_REGS
>>> };
>>> @@ -117,5 +122,7 @@ void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>>> const struct alpha_pll_config *config);
>>> void clk_fabia_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
>>> const struct alpha_pll_config *config);
>>> +extern const struct clk_ops clk_trion_fixed_pll_ops;
>>> +extern const struct clk_ops clk_trion_pll_postdiv_ops;
>>> #endif
>>>
>>
>> --
>> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
>> of Code Aurora Forum, hosted by The Linux Foundation.
>>
>> --
>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
next prev parent reply other threads:[~2019-06-17 6:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-06-12 9:17 [PATCH v2 0/5] clk: qcom: Add support for SM8150 GCC Vinod Koul
2019-06-12 9:17 ` [PATCH v2 1/5] clk: qcom: clk-alpha-pll: Remove unnecessary cast Vinod Koul
2019-06-17 4:37 ` Bjorn Andersson
2019-06-24 7:46 ` Vinod Koul
2019-06-12 9:17 ` [PATCH v2 2/5] clk: qcom: clk-alpha-pll: Remove post_div_table checks Vinod Koul
2019-06-17 4:28 ` Bjorn Andersson
2019-06-12 9:17 ` [PATCH v2 3/5] clk: qcom: gcc-qcs404: Add MODULE_ALIAS Vinod Koul
2019-06-17 4:26 ` Bjorn Andersson
2019-06-24 7:55 ` Vinod Koul
2019-06-12 9:17 ` [PATCH v2 4/5] clk: qcom: clk-alpha-pll: Add support for Trion PLLs Vinod Koul
2019-06-13 3:04 ` Taniya Das
2019-06-14 5:42 ` Vinod Koul
2019-06-17 6:10 ` Taniya Das [this message]
2019-06-17 6:16 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=51ec56b7-a276-67e6-c196-ac80281c65e1@codeaurora.org \
--to=tdas@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=dkatraga@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox