* [PATCH 1/2] clk: qcom: Add support for RPM Clocks
2015-07-09 12:18 [PATCH 0/2] Add initial support for RPM clocks Georgi Djakov
@ 2015-07-09 12:18 ` Georgi Djakov
2015-07-09 12:27 ` Srinivas Kandagatla
2015-07-09 12:18 ` [PATCH 2/2] clk: qcom: Add MSM8916 RPM clock driver Georgi Djakov
1 sibling, 1 reply; 6+ messages in thread
From: Georgi Djakov @ 2015-07-09 12:18 UTC (permalink / raw)
To: sboyd; +Cc: mturquette, linux-clk, linux-kernel, linux-arm-msm
This patch adds initial support for clocks controlled by the RPM
(Resource Power Manager) processor found on some Qualcomm SoCs.
The RPM is a dedicated hardware engine for managing the shared
SoC resources in order to keep the lowest power profile. It
communicates with other hardware subsystems via shared memory
and accepts clock requests, aggregates the requests and turns
the clocks on/off or scales them on demand.
This work is based on the codeaurora.org driver:
https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-rpm.c | 164 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/qcom/clk-rpm.h | 137 ++++++++++++++++++++++++++++++++++++
3 files changed, 302 insertions(+)
create mode 100644 drivers/clk/qcom/clk-rpm.c
create mode 100644 drivers/clk/qcom/clk-rpm.h
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 50b337a24a87..4d14a73ee4ed 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -8,6 +8,7 @@ clk-qcom-y += clk-rcg2.o
clk-qcom-y += clk-branch.o
clk-qcom-y += clk-regmap-divider.o
clk-qcom-y += clk-regmap-mux.o
+clk-qcom-y += clk-rpm.o
clk-qcom-y += reset.o
obj-$(CONFIG_APQ_GCC_8084) += gcc-apq8084.o
diff --git a/drivers/clk/qcom/clk-rpm.c b/drivers/clk/qcom/clk-rpm.c
new file mode 100644
index 000000000000..58d858f760ea
--- /dev/null
+++ b/drivers/clk/qcom/clk-rpm.c
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+#include "clk-rpm.h"
+
+static int clk_rpm_set_rate_active(struct clk_rpm *r, unsigned long value)
+{
+ struct rpm_clk_req req = {
+ .key = QCOM_RPM_SMD_KEY_RATE,
+ .nbytes = sizeof(u32),
+ .value = DIV_ROUND_UP(value, 1000), /* RPM expects KHz */
+ };
+
+ return qcom_rpm_smd_write(r->rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+ r->rpm_res_type, r->rpm_clk_id, &req,
+ sizeof(req));
+}
+
+static int clk_rpm_prepare(struct clk_hw *hw)
+{
+ struct clk_rpm *r = to_clk_rpm(hw);
+ struct clk_rpm *peer = r->peer;
+ u32 value;
+ int ret = 0;
+
+ /* Don't send requests to the RPM if the rate has not been set. */
+ if (!r->rate)
+ goto out;
+
+ /* Take peer clock's rate into account only if it's enabled. */
+ if (peer->enabled)
+ value = max(r->rate, peer->rate);
+ else
+ value = r->rate;
+
+ if (r->branch)
+ value = !!value;
+
+ ret = clk_rpm_set_rate_active(r, value);
+ if (ret)
+ goto out;
+
+out:
+ if (!ret)
+ r->enabled = true;
+
+ return ret;
+}
+
+static void clk_rpm_unprepare(struct clk_hw *hw)
+{
+ struct clk_rpm *r = to_clk_rpm(hw);
+
+ if (r->rate) {
+ struct clk_rpm *peer = r->peer;
+ unsigned long peer_rate;
+ u32 value;
+ int ret;
+
+ /* Take peer clock's rate into account only if it's enabled. */
+ peer_rate = peer->enabled ? peer->rate : 0;
+ value = r->branch ? !!peer_rate : peer_rate;
+ ret = clk_rpm_set_rate_active(r, value);
+ if (ret)
+ return;
+ }
+ r->enabled = false;
+}
+
+static int clk_rpm_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_rpm *r = to_clk_rpm(hw);
+ int ret = 0;
+
+ if (r->enabled) {
+ u32 value;
+ struct clk_rpm *peer = r->peer;
+
+ /* Take peer clock's rate into account only if it's enabled. */
+ if (peer->enabled)
+ value = max(rate, peer->rate);
+ else
+ value = rate;
+
+ ret = clk_rpm_set_rate_active(r, value);
+ if (ret)
+ goto out;
+ }
+ r->rate = rate;
+out:
+ return ret;
+}
+
+static long clk_rpm_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate)
+{
+ return rate;
+}
+
+static unsigned long clk_rpm_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_rpm *r = to_clk_rpm(hw);
+
+ return r->rate;
+}
+
+int clk_rpm_enable_scaling(struct qcom_smd_rpm *rpm)
+{
+ int ret;
+ struct rpm_clk_req req = {
+ .key = QCOM_RPM_SMD_KEY_ENABLE,
+ .nbytes = sizeof(u32),
+ .value = 1,
+ };
+
+ ret = qcom_rpm_smd_write(rpm, QCOM_SMD_RPM_ACTIVE_STATE,
+ QCOM_SMD_RPM_MISC_CLK,
+ QCOM_RPM_SCALING_ENABLE_ID, &req, sizeof(req));
+ if (ret < 0) {
+ if (ret != -EPROBE_DEFER)
+ pr_err("RPM clock scaling (active set) not enabled!\n");
+ return ret;
+ }
+
+ pr_debug("%s: RPM clock scaling is enabled\n", __func__);
+ return 0;
+}
+
+const struct clk_ops clk_rpm_ops = {
+ .prepare = clk_rpm_prepare,
+ .unprepare = clk_rpm_unprepare,
+ .set_rate = clk_rpm_set_rate,
+ .round_rate = clk_rpm_round_rate,
+ .recalc_rate = clk_rpm_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_rpm_ops);
+
+const struct clk_ops clk_rpm_branch_ops = {
+ .prepare = clk_rpm_prepare,
+ .unprepare = clk_rpm_unprepare,
+ .round_rate = clk_rpm_round_rate,
+ .recalc_rate = clk_rpm_recalc_rate,
+};
+EXPORT_SYMBOL_GPL(clk_rpm_branch_ops);
diff --git a/drivers/clk/qcom/clk-rpm.h b/drivers/clk/qcom/clk-rpm.h
new file mode 100644
index 000000000000..51bedf787775
--- /dev/null
+++ b/drivers/clk/qcom/clk-rpm.h
@@ -0,0 +1,137 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __QCOM_CLK_RPM_H__
+#define __QCOM_CLK_RPM_H__
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/qcom-smd-rpm.h>
+
+#define QCOM_RPM_KEY_SOFTWARE_ENABLE 0x6e657773
+#define QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY 0x62636370
+#define QCOM_RPM_SMD_KEY_RATE 0x007a484b
+#define QCOM_RPM_SMD_KEY_ENABLE 0x62616e45
+#define QCOM_RPM_SMD_KEY_STATE 0x54415453
+#define QCOM_RPM_SCALING_ENABLE_ID 0x2
+
+struct clk_rpm {
+ const int rpm_res_type;
+ const int rpm_key;
+ const int rpm_clk_id;
+ const int rpm_status_id;
+ const bool active_only;
+ bool enabled;
+ bool branch;
+ struct clk_rpm *peer;
+ struct clk_hw hw;
+ unsigned long rate;
+ struct qcom_smd_rpm *rpm;
+};
+
+struct rpm_clk_req {
+ u32 key;
+ u32 nbytes;
+ u32 value;
+};
+
+extern const struct clk_ops clk_rpm_ops;
+extern const struct clk_ops clk_rpm_branch_ops;
+int clk_rpm_enable_scaling(struct qcom_smd_rpm *rpm);
+
+#define to_clk_rpm(_hw) container_of(_hw, struct clk_rpm, hw)
+
+#define __DEFINE_CLK_RPM(_name, active, type, r_id, stat_id, dep, key) \
+ static struct clk_rpm active; \
+ static struct clk_rpm _name = { \
+ .rpm_res_type = (type), \
+ .rpm_clk_id = (r_id), \
+ .rpm_status_id = (stat_id), \
+ .rpm_key = (key), \
+ .peer = &active, \
+ .rate = INT_MAX, \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_rpm_ops, \
+ .name = #_name, \
+ .flags = CLK_IS_ROOT, \
+ }, \
+ }; \
+ static struct clk_rpm active = { \
+ .rpm_res_type = (type), \
+ .rpm_clk_id = (r_id), \
+ .rpm_status_id = (stat_id), \
+ .rpm_key = (key), \
+ .peer = &_name, \
+ .active_only = true, \
+ .rate = INT_MAX, \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_rpm_ops, \
+ .name = #active, \
+ .flags = CLK_IS_ROOT, \
+ }, \
+ };
+
+#define __DEFINE_CLK_RPM_BRANCH(_name, active, type, r_id, stat_id, r, \
+ key) \
+ static struct clk_rpm active; \
+ static struct clk_rpm _name = { \
+ .rpm_res_type = (type), \
+ .rpm_clk_id = (r_id), \
+ .rpm_status_id = (stat_id), \
+ .rpm_key = (key), \
+ .peer = &active, \
+ .branch = true, \
+ .rate = (r), \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_rpm_branch_ops, \
+ .name = #_name, \
+ .flags = CLK_IS_ROOT, \
+ }, \
+ }; \
+ static struct clk_rpm active = { \
+ .rpm_res_type = (type), \
+ .rpm_clk_id = (r_id), \
+ .rpm_status_id = (stat_id), \
+ .rpm_key = (key), \
+ .peer = &_name, \
+ .active_only = true, \
+ .branch = true, \
+ .rate = (r), \
+ .hw.init = &(struct clk_init_data){ \
+ .ops = &clk_rpm_branch_ops, \
+ .name = #active, \
+ .flags = CLK_IS_ROOT, \
+ }, \
+ };
+
+#define DEFINE_CLK_RPM_SMD(_name, active, type, r_id, dep) \
+ __DEFINE_CLK_RPM(_name, active, type, r_id, 0, dep, \
+ QCOM_RPM_SMD_KEY_RATE)
+
+#define DEFINE_CLK_RPM_SMD_BRANCH(_name, active, type, r_id, r) \
+ __DEFINE_CLK_RPM_BRANCH(_name, active, type, r_id, 0, r, \
+ QCOM_RPM_SMD_KEY_ENABLE)
+
+#define DEFINE_CLK_RPM_SMD_QDSS(_name, active, type, r_id) \
+ __DEFINE_CLK_RPM(_name, active, type, r_id, \
+ 0, 0, QCOM_RPM_SMD_KEY_STATE)
+
+#define DEFINE_CLK_RPM_SMD_XO_BUFFER(_name, active, r_id) \
+ __DEFINE_CLK_RPM_BRANCH(_name, active, QCOM_SMD_RPM_CLK_BUF_A, \
+ r_id, 0, 1000, QCOM_RPM_KEY_SOFTWARE_ENABLE)
+
+#define DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(_name, active, r_id) \
+ __DEFINE_CLK_RPM_BRANCH(_name, active, QCOM_SMD_RPM_CLK_BUF_A, \
+ r_id, 0, 1000, QCOM_RPM_KEY_PIN_CTRL_CLK_BUFFER_ENABLE_KEY)
+
+#endif
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH 2/2] clk: qcom: Add MSM8916 RPM clock driver
2015-07-09 12:18 [PATCH 0/2] Add initial support for RPM clocks Georgi Djakov
2015-07-09 12:18 ` [PATCH 1/2] clk: qcom: Add support for RPM Clocks Georgi Djakov
@ 2015-07-09 12:18 ` Georgi Djakov
1 sibling, 0 replies; 6+ messages in thread
From: Georgi Djakov @ 2015-07-09 12:18 UTC (permalink / raw)
To: sboyd; +Cc: mturquette, linux-clk, linux-kernel, linux-arm-msm
Add support for clocks that are controlled by the RPM processor
on Qualcomm msm8916 based platforms.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
---
.../devicetree/bindings/clock/qcom,rpmcc.txt | 20 +++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-msm8916.c | 13 --
drivers/clk/qcom/rpmcc-msm8916.c | 183 ++++++++++++++++++++
include/dt-bindings/clock/qcom,rpmcc-msm8916.h | 44 +++++
5 files changed, 248 insertions(+), 13 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
create mode 100644 drivers/clk/qcom/rpmcc-msm8916.c
create mode 100644 include/dt-bindings/clock/qcom,rpmcc-msm8916.h
diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
new file mode 100644
index 000000000000..74569e006bef
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
@@ -0,0 +1,20 @@
+Qualcomm RPM Clock Controller Binding
+------------------------------------------------
+The RPM is a dedicated hardware engine for managing the shared
+SoC resources in order to keep the lowest power profile. It
+communicates with other hardware subsystems via shared memory
+and accepts clock requests, aggregates the requests and turns
+the clocks on/off or scales them on demand.
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+ "qcom,rpmcc-msm8916"
+
+- #clock-cells : shall contain 1
+
+Example:
+ rpmcc: rpmcc {
+ compatible = "qcom,rpmcc-msm8916";
+ #clock-cells = <1>;
+ };
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 4d14a73ee4ed..d2c155bb1035 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
obj-$(CONFIG_MSM_GCC_8660) += gcc-msm8660.o
obj-$(CONFIG_MSM_GCC_8916) += gcc-msm8916.o
+obj-$(CONFIG_MSM_GCC_8916) += rpmcc-msm8916.o
obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
obj-$(CONFIG_MSM_LCC_8960) += lcc-msm8960.o
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index 3bf4fb3deef6..28ef2c771157 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -2820,19 +2820,6 @@ MODULE_DEVICE_TABLE(of, gcc_msm8916_match_table);
static int gcc_msm8916_probe(struct platform_device *pdev)
{
- struct clk *clk;
- struct device *dev = &pdev->dev;
-
- /* Temporary until RPM clocks supported */
- clk = clk_register_fixed_rate(dev, "xo", NULL, CLK_IS_ROOT, 19200000);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
- clk = clk_register_fixed_rate(dev, "sleep_clk_src", NULL,
- CLK_IS_ROOT, 32768);
- if (IS_ERR(clk))
- return PTR_ERR(clk);
-
return qcom_cc_probe(pdev, &gcc_msm8916_desc);
}
diff --git a/drivers/clk/qcom/rpmcc-msm8916.c b/drivers/clk/qcom/rpmcc-msm8916.c
new file mode 100644
index 000000000000..930e85637338
--- /dev/null
+++ b/drivers/clk/qcom/rpmcc-msm8916.c
@@ -0,0 +1,183 @@
+/*
+ * Copyright (c) 2015, Linaro Limited
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "clk-rpm.h"
+#include <dt-bindings/clock/qcom,rpmcc-msm8916.h>
+
+#define CXO_ID 0x0
+#define QDSS_ID 0x1
+#define BUS_SCALING 0x2
+
+#define PCNOC_ID 0x0
+#define SNOC_ID 0x1
+#define BIMC_ID 0x0
+
+#define BB_CLK1_ID 1
+#define BB_CLK2_ID 2
+#define RF_CLK1_ID 4
+#define RF_CLK2_ID 5
+
+struct rpm_cc {
+ struct clk_onecell_data data;
+ struct clk *clks[];
+};
+
+/* SMD clocks */
+DEFINE_CLK_RPM_SMD(pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, PCNOC_ID, NULL);
+DEFINE_CLK_RPM_SMD(snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, SNOC_ID, NULL);
+DEFINE_CLK_RPM_SMD(bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, BIMC_ID, NULL);
+
+DEFINE_CLK_RPM_SMD_BRANCH(xo, xo_a, QCOM_SMD_RPM_MISC_CLK, CXO_ID, 19200000);
+DEFINE_CLK_RPM_SMD_QDSS(qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, QDSS_ID);
+
+/* SMD_XO_BUFFER */
+DEFINE_CLK_RPM_SMD_XO_BUFFER(bb_clk1, bb_clk1_a, BB_CLK1_ID);
+DEFINE_CLK_RPM_SMD_XO_BUFFER(bb_clk2, bb_clk2_a, BB_CLK2_ID);
+DEFINE_CLK_RPM_SMD_XO_BUFFER(rf_clk1, rf_clk1_a, RF_CLK1_ID);
+DEFINE_CLK_RPM_SMD_XO_BUFFER(rf_clk2, rf_clk2_a, RF_CLK2_ID);
+
+DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(bb_clk1_pin, bb_clk1_a_pin, BB_CLK1_ID);
+DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(bb_clk2_pin, bb_clk2_a_pin, BB_CLK2_ID);
+DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(rf_clk1_pin, rf_clk1_a_pin, RF_CLK1_ID);
+DEFINE_CLK_RPM_SMD_XO_BUFFER_PINCTRL(rf_clk2_pin, rf_clk2_a_pin, RF_CLK2_ID);
+
+static struct clk_rpm *rpmcc_msm8916_clks[] = {
+ [RPM_XO_CLK_SRC] = &xo,
+ [RPM_XO_A_CLK_SRC] = &xo_a,
+ [RPM_PCNOC_CLK] = &pcnoc_clk,
+ [RPM_PCNOC_A_CLK] = &pcnoc_a_clk,
+ [RPM_SNOC_CLK] = &snoc_clk,
+ [RPM_SNOC_A_CLK] = &snoc_a_clk,
+ [RPM_BIMC_CLK] = &bimc_clk,
+ [RPM_BIMC_A_CLK] = &bimc_a_clk,
+ [RPM_QDSS_CLK] = &qdss_clk,
+ [RPM_QDSS_A_CLK] = &qdss_a_clk,
+ [RPM_BB_CLK1] = &bb_clk1,
+ [RPM_BB_CLK1_A] = &bb_clk1_a,
+ [RPM_BB_CLK2] = &bb_clk2,
+ [RPM_BB_CLK2_A] = &bb_clk2_a,
+ [RPM_RF_CLK1] = &rf_clk1,
+ [RPM_RF_CLK1_A] = &rf_clk1_a,
+ [RPM_RF_CLK2] = &rf_clk2,
+ [RPM_RF_CLK2_A] = &rf_clk2_a,
+ [RPM_BB_CLK1_PIN] = &bb_clk1_pin,
+ [RPM_BB_CLK1_A_PIN] = &bb_clk1_a_pin,
+ [RPM_BB_CLK2_PIN] = &bb_clk2_pin,
+ [RPM_BB_CLK2_A_PIN] = &bb_clk2_a_pin,
+ [RPM_RF_CLK1_PIN] = &rf_clk1_pin,
+ [RPM_RF_CLK1_A_PIN] = &rf_clk1_a_pin,
+ [RPM_RF_CLK2_PIN] = &rf_clk2_pin,
+ [RPM_RF_CLK2_A_PIN] = &rf_clk2_a_pin,
+};
+
+static int rpmcc_msm8916_probe(struct platform_device *pdev)
+{
+ struct clk **clks;
+ struct clk *clk;
+ struct rpm_cc *rcc;
+ struct qcom_smd_rpm *rpm;
+ struct clk_onecell_data *data;
+ int num_clks = ARRAY_SIZE(rpmcc_msm8916_clks);
+ int ret, i;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ rpm = dev_get_drvdata(pdev->dev.parent);
+ if (!rpm) {
+ dev_err(&pdev->dev, "Unable to retrieve handle to RPM\n");
+ return -ENODEV;
+ }
+
+ ret = clk_rpm_enable_scaling(rpm);
+ if (ret)
+ return ret;
+
+ rcc = devm_kzalloc(&pdev->dev, sizeof(*rcc) + sizeof(*clks) * num_clks,
+ GFP_KERNEL);
+ if (!rcc)
+ return -ENOMEM;
+
+ clks = rcc->clks;
+ data = &rcc->data;
+ data->clks = clks;
+ data->clk_num = num_clks;
+
+ clk = clk_register_fixed_rate(&pdev->dev, "sleep_clk_src", NULL,
+ CLK_IS_ROOT, 32768);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ for (i = 0; i < num_clks; i++) {
+ if (!rpmcc_msm8916_clks[i]) {
+ clks[i] = ERR_PTR(-ENOENT);
+ continue;
+ }
+
+ rpmcc_msm8916_clks[i]->rpm = rpm;
+ clk = devm_clk_register(&pdev->dev, &rpmcc_msm8916_clks[i]->hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ clks[i] = clk;
+ }
+
+ ret = of_clk_add_provider(pdev->dev.of_node, of_clk_src_onecell_get,
+ data);
+ if (ret)
+ return ret;
+
+ /* Hold a vote for max rates */
+ clk_set_rate(bimc_a_clk.hw.clk, INT_MAX);
+ clk_prepare_enable(bimc_a_clk.hw.clk);
+ clk_set_rate(bimc_clk.hw.clk, INT_MAX);
+ clk_prepare_enable(bimc_clk.hw.clk);
+ clk_set_rate(snoc_clk.hw.clk, INT_MAX);
+ clk_prepare_enable(snoc_clk.hw.clk);
+ clk_prepare_enable(xo.hw.clk);
+
+ return 0;
+}
+
+static int rpmcc_msm8916_remove(struct platform_device *pdev)
+{
+ of_clk_del_provider(pdev->dev.of_node);
+ return 0;
+}
+
+static const struct of_device_id rpmcc_msm8916_of_match[] = {
+ { .compatible = "qcom,rpmcc-msm8916" },
+ { },
+};
+
+static struct platform_driver rpmcc_msm8916_driver = {
+ .driver = {
+ .name = "qcom-rpmcc-msm8916",
+ .of_match_table = rpmcc_msm8916_of_match,
+ },
+ .probe = rpmcc_msm8916_probe,
+ .remove = rpmcc_msm8916_remove,
+};
+
+module_platform_driver(rpmcc_msm8916_driver);
+core_initcall(rpmcc_msm8916_driver_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Qualcomm MSM8916 RPM Clock Controller Driver");
diff --git a/include/dt-bindings/clock/qcom,rpmcc-msm8916.h b/include/dt-bindings/clock/qcom,rpmcc-msm8916.h
new file mode 100644
index 000000000000..62d63940896a
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,rpmcc-msm8916.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright 2015 Linaro Limited
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_CLK_MSM_RPMCC_8916_H
+#define _DT_BINDINGS_CLK_MSM_RPMCC_8916_H
+
+#define RPM_XO_CLK_SRC 0
+#define RPM_XO_A_CLK_SRC 1
+#define RPM_PCNOC_CLK 2
+#define RPM_PCNOC_A_CLK 3
+#define RPM_SNOC_CLK 4
+#define RPM_SNOC_A_CLK 6
+#define RPM_BIMC_CLK 7
+#define RPM_BIMC_A_CLK 8
+#define RPM_QDSS_CLK 9
+#define RPM_QDSS_A_CLK 10
+#define RPM_BB_CLK1 11
+#define RPM_BB_CLK1_A 12
+#define RPM_BB_CLK2 13
+#define RPM_BB_CLK2_A 14
+#define RPM_RF_CLK1 15
+#define RPM_RF_CLK1_A 16
+#define RPM_RF_CLK2 17
+#define RPM_RF_CLK2_A 18
+#define RPM_BB_CLK1_PIN 19
+#define RPM_BB_CLK1_A_PIN 20
+#define RPM_BB_CLK2_PIN 21
+#define RPM_BB_CLK2_A_PIN 22
+#define RPM_RF_CLK1_PIN 23
+#define RPM_RF_CLK1_A_PIN 24
+#define RPM_RF_CLK2_PIN 25
+#define RPM_RF_CLK2_A_PIN 26
+
+#endif
^ permalink raw reply related [flat|nested] 6+ messages in thread