[PATCH v2 00/12] clk: samsung: exynos7: Cleanup of clock file

[PATCH v2 00/12] clk: samsung: exynos7: Cleanup of clock file

[Alim Akhtar]

Currently there are lots of ambiguity between clock names in clock file
and in user manual, which leads to lots of confusion for the reviewers.
This series attempts to cleanup the exynos7 clock file as per
user manual naming convention.
This also adds some of the missing Gate clocks which are needed
to complete the clock tree.

Changes since v1:
- Addressed various review comments from Krzysztof[1]
- Collected Reviewed-by from Krzysztof
- This also modifies patch 05/12 and 12/12, moved Gate clocks addition to patch 02/12

This patch series has a dependency on [2]

[1]-> https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg46391.html
[2]-> https://www.mail-archive.com/linux-samsung-soc <at> vger.kernel.org/msg46122.html

Alim Akhtar (12):
  clk: samsung: exynos7: Change the CMU_TOPC block clock names
  clk: samsung: exynos7: Adds missing clocks gates of CMU_TOPC
  clk: samsung: exynos7: Corrects CMU_TOP0 clocks names
  clk: samsung: exynos7: Corrects CMU_TOP1 clocks names
  clk: samsung: exynos7: Corrects CMU_CCORE clocks names
  clk: samsung: exynos7: Corrects CMU_PERIC0 clocks names
  clk: samsung: exynos7: Corrects CMU_PERIC1 clocks names
  clk: samsung: exynos7: Corrects CMU_PERIS clocks names
  clk: samsung: exynos7: Corrects CMU_FSYS0 clocks names
  clk: samsung: exynos7: Corrects CMU_FSYS1 clocks names
  clk: samsung: exynos7: Add missing fixed_clks to cmu_info
  clk: samsung: exynos7: Add required clock tree for UFS

 drivers/clk/samsung/clk-exynos7.c       |  421 +++++++++++++++++++++----------
 include/dt-bindings/clock/exynos7-clk.h |   43 +++-
 2 files changed, 332 insertions(+), 132 deletions(-)

-- 
1.7.10.4

[PATCH v2 01/12] clk: samsung: exynos7: Change the CMU_TOPC block clock names

[Alim Akhtar]

Corrects the CMU_TOPC block clock names as per user manual.
This does not change any functionalities.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c |   70 ++++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 33 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index 380608b..df061ce 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -37,36 +37,36 @@
 #define ENABLE_ACLK_TOPC1	0x0804
 
 static struct samsung_fixed_factor_clock topc_fixed_factor_clks[] __initdata = {
-	FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_bus0_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_topc_bus0_pll", 1, 2, 0),
 	FFACTOR(0, "ffac_topc_bus0_pll_div4",
 		"ffac_topc_bus0_pll_div2", 1, 2, 0),
-	FFACTOR(0, "ffac_topc_bus1_pll_div2", "mout_bus1_pll_ctrl", 1, 2, 0),
-	FFACTOR(0, "ffac_topc_cc_pll_div2", "mout_cc_pll_ctrl", 1, 2, 0),
-	FFACTOR(0, "ffac_topc_mfc_pll_div2", "mout_mfc_pll_ctrl", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_bus1_pll_div2", "mout_topc_bus1_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_cc_pll_div2", "mout_topc_cc_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_topc_mfc_pll_div2", "mout_topc_mfc_pll", 1, 2, 0),
 };
 
 /* List of parent clocks for Muxes in CMU_TOPC */
-PNAME(mout_aud_pll_ctrl_p)	= { "fin_pll", "fout_aud_pll" };
-PNAME(mout_bus0_pll_ctrl_p)	= { "fin_pll", "fout_bus0_pll" };
-PNAME(mout_bus1_pll_ctrl_p)	= { "fin_pll", "fout_bus1_pll" };
-PNAME(mout_cc_pll_ctrl_p)	= { "fin_pll", "fout_cc_pll" };
-PNAME(mout_mfc_pll_ctrl_p)	= { "fin_pll", "fout_mfc_pll" };
+PNAME(mout_topc_aud_pll_ctrl_p)	= { "fin_pll", "fout_aud_pll" };
+PNAME(mout_topc_bus0_pll_ctrl_p)	= { "fin_pll", "fout_bus0_pll" };
+PNAME(mout_topc_bus1_pll_ctrl_p)	= { "fin_pll", "fout_bus1_pll" };
+PNAME(mout_topc_cc_pll_ctrl_p)	= { "fin_pll", "fout_cc_pll" };
+PNAME(mout_topc_mfc_pll_ctrl_p)	= { "fin_pll", "fout_mfc_pll" };
 
-PNAME(mout_topc_group2) = { "mout_sclk_bus0_pll_cmuc",
-	"mout_sclk_bus1_pll_cmuc", "mout_sclk_cc_pll_cmuc",
-	"mout_sclk_mfc_pll_cmuc" };
+PNAME(mout_topc_group2) = { "mout_topc_bus0_pll_half",
+	"mout_topc_bus1_pll_half", "mout_topc_cc_pll_half",
+	"mout_topc_mfc_pll_half" };
 
-PNAME(mout_sclk_bus0_pll_cmuc_p) = { "mout_bus0_pll_ctrl",
+PNAME(mout_topc_bus0_pll_half_p) = { "mout_topc_bus0_pll",
 	"ffac_topc_bus0_pll_div2", "ffac_topc_bus0_pll_div4"};
-PNAME(mout_sclk_bus1_pll_cmuc_p) = { "mout_bus1_pll_ctrl",
+PNAME(mout_topc_bus1_pll_half_p) = { "mout_topc_bus1_pll",
 	"ffac_topc_bus1_pll_div2"};
-PNAME(mout_sclk_cc_pll_cmuc_p) = { "mout_cc_pll_ctrl",
+PNAME(mout_topc_cc_pll_half_p) = { "mout_topc_cc_pll",
 	"ffac_topc_cc_pll_div2"};
-PNAME(mout_sclk_mfc_pll_cmuc_p) = { "mout_mfc_pll_ctrl",
+PNAME(mout_topc_mfc_pll_half_p) = { "mout_topc_mfc_pll",
 	"ffac_topc_mfc_pll_div2"};
 
 
-PNAME(mout_sclk_bus0_pll_out_p) = {"mout_bus0_pll_ctrl",
+PNAME(mout_topc_bus0_pll_out_p) = {"mout_topc_bus0_pll",
 	"ffac_topc_bus0_pll_div2"};
 
 static unsigned long topc_clk_regs[] __initdata = {
@@ -90,22 +90,26 @@ static unsigned long topc_clk_regs[] __initdata = {
 };
 
 static struct samsung_mux_clock topc_mux_clks[] __initdata = {
-	MUX(0, "mout_bus0_pll_ctrl", mout_bus0_pll_ctrl_p, MUX_SEL_TOPC0, 0, 1),
-	MUX(0, "mout_bus1_pll_ctrl", mout_bus1_pll_ctrl_p, MUX_SEL_TOPC0, 4, 1),
-	MUX(0, "mout_cc_pll_ctrl", mout_cc_pll_ctrl_p, MUX_SEL_TOPC0, 8, 1),
-	MUX(0, "mout_mfc_pll_ctrl", mout_mfc_pll_ctrl_p, MUX_SEL_TOPC0, 12, 1),
-
-	MUX(0, "mout_sclk_bus0_pll_cmuc", mout_sclk_bus0_pll_cmuc_p,
+	MUX(0, "mout_topc_bus0_pll", mout_topc_bus0_pll_ctrl_p,
+		MUX_SEL_TOPC0, 0, 1),
+	MUX(0, "mout_topc_bus1_pll", mout_topc_bus1_pll_ctrl_p,
+		MUX_SEL_TOPC0, 4, 1),
+	MUX(0, "mout_topc_cc_pll", mout_topc_cc_pll_ctrl_p,
+		MUX_SEL_TOPC0, 8, 1),
+	MUX(0, "mout_topc_mfc_pll", mout_topc_mfc_pll_ctrl_p,
+		MUX_SEL_TOPC0, 12, 1),
+	MUX(0, "mout_topc_bus0_pll_half", mout_topc_bus0_pll_half_p,
 		MUX_SEL_TOPC0, 16, 2),
-	MUX(0, "mout_sclk_bus1_pll_cmuc", mout_sclk_bus1_pll_cmuc_p,
+	MUX(0, "mout_topc_bus1_pll_half", mout_topc_bus1_pll_half_p,
 		MUX_SEL_TOPC0, 20, 1),
-	MUX(0, "mout_sclk_cc_pll_cmuc", mout_sclk_cc_pll_cmuc_p,
+	MUX(0, "mout_topc_cc_pll_half", mout_topc_cc_pll_half_p,
 		MUX_SEL_TOPC0, 24, 1),
-	MUX(0, "mout_sclk_mfc_pll_cmuc", mout_sclk_mfc_pll_cmuc_p,
+	MUX(0, "mout_topc_mfc_pll_half", mout_topc_mfc_pll_half_p,
 		MUX_SEL_TOPC0, 28, 1),
 
-	MUX(0, "mout_aud_pll_ctrl", mout_aud_pll_ctrl_p, MUX_SEL_TOPC1, 0, 1),
-	MUX(0, "mout_sclk_bus0_pll_out", mout_sclk_bus0_pll_out_p,
+	MUX(0, "mout_topc_aud_pll", mout_topc_aud_pll_ctrl_p,
+		MUX_SEL_TOPC1, 0, 1),
+	MUX(0, "mout_topc_bus0_pll_out", mout_topc_bus0_pll_out_p,
 		MUX_SEL_TOPC1, 16, 1),
 
 	MUX(0, "mout_aclk_ccore_133", mout_topc_group2,	MUX_SEL_TOPC2, 4, 2),
@@ -123,15 +127,15 @@ static struct samsung_div_clock topc_div_clks[] __initdata = {
 	DIV(DOUT_ACLK_PERIS, "dout_aclk_peris_66", "mout_aclk_peris_66",
 		DIV_TOPC1, 24, 4),
 
-	DIV(DOUT_SCLK_BUS0_PLL, "dout_sclk_bus0_pll", "mout_sclk_bus0_pll_out",
+	DIV(DOUT_SCLK_BUS0_PLL, "dout_sclk_bus0_pll", "mout_topc_bus0_pll_out",
 		DIV_TOPC3, 0, 4),
-	DIV(DOUT_SCLK_BUS1_PLL, "dout_sclk_bus1_pll", "mout_bus1_pll_ctrl",
+	DIV(DOUT_SCLK_BUS1_PLL, "dout_sclk_bus1_pll", "mout_topc_bus1_pll",
 		DIV_TOPC3, 8, 4),
-	DIV(DOUT_SCLK_CC_PLL, "dout_sclk_cc_pll", "mout_cc_pll_ctrl",
+	DIV(DOUT_SCLK_CC_PLL, "dout_sclk_cc_pll", "mout_topc_cc_pll",
 		DIV_TOPC3, 12, 4),
-	DIV(DOUT_SCLK_MFC_PLL, "dout_sclk_mfc_pll", "mout_mfc_pll_ctrl",
+	DIV(DOUT_SCLK_MFC_PLL, "dout_sclk_mfc_pll", "mout_topc_mfc_pll",
 		DIV_TOPC3, 16, 4),
-	DIV(DOUT_SCLK_AUD_PLL, "dout_sclk_aud_pll", "mout_aud_pll_ctrl",
+	DIV(DOUT_SCLK_AUD_PLL, "dout_sclk_aud_pll", "mout_topc_aud_pll",
 		DIV_TOPC3, 28, 4),
 };
 
-- 
1.7.10.4

[PATCH v2 02/12] clk: samsung: exynos7: Adds missing clocks gates of CMU_TOPC

[Alim Akhtar]

This adds some of the missing GATE clocks of CMU_TOPC block.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c       |   27 +++++++++++++++++++++++++++
 include/dt-bindings/clock/exynos7-clk.h |   13 ++++++++++++-
 2 files changed, 39 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index df061ce..e11449b 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -34,7 +34,9 @@
 #define DIV_TOPC0		0x0600
 #define DIV_TOPC1		0x0604
 #define DIV_TOPC3		0x060C
+#define ENABLE_ACLK_TOPC0	0x0800
 #define ENABLE_ACLK_TOPC1	0x0804
+#define ENABLE_SCLK_TOPC1	0x0A04
 
 static struct samsung_fixed_factor_clock topc_fixed_factor_clks[] __initdata = {
 	FFACTOR(0, "ffac_topc_bus0_pll_div2", "mout_topc_bus0_pll", 1, 2, 0),
@@ -145,8 +147,33 @@ static struct samsung_pll_rate_table pll1460x_24mhz_tbl[] __initdata = {
 };
 
 static struct samsung_gate_clock topc_gate_clks[] __initdata = {
+	GATE(ACLK_CCORE_133, "aclk_ccore_133", "dout_aclk_ccore_133",
+		ENABLE_ACLK_TOPC0, 4, 0, 0),
+
 	GATE(ACLK_MSCL_532, "aclk_mscl_532", "dout_aclk_mscl_532",
 		ENABLE_ACLK_TOPC1, 20, 0, 0),
+
+	GATE(ACLK_PERIS_66, "aclk_peris_66", "dout_aclk_peris_66",
+		ENABLE_ACLK_TOPC1, 24, 0, 0),
+
+	GATE(SCLK_AUD_PLL, "sclk_aud_pll", "dout_sclk_aud_pll",
+		ENABLE_SCLK_TOPC1, 20, 0, 0),
+	GATE(SCLK_MFC_PLL_B, "sclk_mfc_pll_b", "dout_sclk_mfc_pll",
+		ENABLE_SCLK_TOPC1, 17, 0, 0),
+	GATE(SCLK_MFC_PLL_A, "sclk_mfc_pll_a", "dout_sclk_mfc_pll",
+		ENABLE_SCLK_TOPC1, 16, 0, 0),
+	GATE(SCLK_BUS1_PLL_B, "sclk_bus1_pll_b", "dout_sclk_bus1_pll",
+		ENABLE_SCLK_TOPC1, 13, 0, 0),
+	GATE(SCLK_BUS1_PLL_A, "sclk_bus1_pll_a", "dout_sclk_bus1_pll",
+		ENABLE_SCLK_TOPC1, 12, 0, 0),
+	GATE(SCLK_BUS0_PLL_B, "sclk_bus0_pll_b", "dout_sclk_bus0_pll",
+		ENABLE_SCLK_TOPC1, 5, 0, 0),
+	GATE(SCLK_BUS0_PLL_A, "sclk_bus0_pll_a", "dout_sclk_bus0_pll",
+		ENABLE_SCLK_TOPC1, 4, 0, 0),
+	GATE(SCLK_CC_PLL_B, "sclk_cc_pll_b", "dout_sclk_cc_pll",
+		ENABLE_SCLK_TOPC1, 1, 0, 0),
+	GATE(SCLK_CC_PLL_A, "sclk_cc_pll_a", "dout_sclk_cc_pll",
+		ENABLE_SCLK_TOPC1, 0, 0, 0),
 };
 
 static struct samsung_pll_clock topc_pll_clks[] __initdata = {
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
index e33c75a..d26fe0f 100644
--- a/include/dt-bindings/clock/exynos7-clk.h
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -21,7 +21,18 @@
 #define ACLK_MSCL_532			8
 #define DOUT_SCLK_AUD_PLL		9
 #define FOUT_AUD_PLL			10
-#define TOPC_NR_CLK			11
+#define SCLK_AUD_PLL			11
+#define SCLK_MFC_PLL_B			12
+#define SCLK_MFC_PLL_A			13
+#define SCLK_BUS1_PLL_B			14
+#define SCLK_BUS1_PLL_A			15
+#define SCLK_BUS0_PLL_B			16
+#define SCLK_BUS0_PLL_A			17
+#define SCLK_CC_PLL_B			18
+#define SCLK_CC_PLL_A			19
+#define ACLK_CCORE_133			20
+#define ACLK_PERIS_66			21
+#define TOPC_NR_CLK			22
 
 /* TOP0 */
 #define DOUT_ACLK_PERIC1		1
-- 
1.7.10.4

[PATCH v2 03/12] clk: samsung: exynos7: Corrects CMU_TOP0 clocks names

[Alim Akhtar]

This patch renames CMU_TOP0 clocks names to match with user manual.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c |   67 ++++++++++++++++++++-----------------
 1 file changed, 37 insertions(+), 30 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index e11449b..84a6e50 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -232,30 +232,30 @@ CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
 #define ENABLE_SCLK_TOP0_PERIC3		0x0A3C
 
 /* List of parent clocks for Muxes in CMU_TOP0 */
-PNAME(mout_bus0_pll_p)	= { "fin_pll", "dout_sclk_bus0_pll" };
-PNAME(mout_bus1_pll_p)	= { "fin_pll", "dout_sclk_bus1_pll" };
-PNAME(mout_cc_pll_p)	= { "fin_pll", "dout_sclk_cc_pll" };
-PNAME(mout_mfc_pll_p)	= { "fin_pll", "dout_sclk_mfc_pll" };
-PNAME(mout_aud_pll_p)	= { "fin_pll", "dout_sclk_aud_pll" };
+PNAME(mout_top0_bus0_pll_user_p)	= { "fin_pll", "sclk_bus0_pll_a" };
+PNAME(mout_top0_bus1_pll_user_p)	= { "fin_pll", "sclk_bus1_pll_a" };
+PNAME(mout_top0_cc_pll_user_p)	= { "fin_pll", "sclk_cc_pll_a" };
+PNAME(mout_top0_mfc_pll_user_p)	= { "fin_pll", "sclk_mfc_pll_a" };
+PNAME(mout_top0_aud_pll_user_p)	= { "fin_pll", "sclk_aud_pll" };
 
-PNAME(mout_top0_half_bus0_pll_p) = {"mout_top0_bus0_pll",
+PNAME(mout_top0_bus0_pll_half_p) = {"mout_top0_bus0_pll_user",
 	"ffac_top0_bus0_pll_div2"};
-PNAME(mout_top0_half_bus1_pll_p) = {"mout_top0_bus1_pll",
+PNAME(mout_top0_bus1_pll_half_p) = {"mout_top0_bus1_pll_user",
 	"ffac_top0_bus1_pll_div2"};
-PNAME(mout_top0_half_cc_pll_p) = {"mout_top0_cc_pll",
+PNAME(mout_top0_cc_pll_half_p) = {"mout_top0_cc_pll_user",
 	"ffac_top0_cc_pll_div2"};
-PNAME(mout_top0_half_mfc_pll_p) = {"mout_top0_mfc_pll",
+PNAME(mout_top0_mfc_pll_half_p) = {"mout_top0_mfc_pll_user",
 	"ffac_top0_mfc_pll_div2"};
 
-PNAME(mout_top0_group1) = {"mout_top0_half_bus0_pll",
-	"mout_top0_half_bus1_pll", "mout_top0_half_cc_pll",
-	"mout_top0_half_mfc_pll"};
+PNAME(mout_top0_group1) = {"mout_top0_bus0_pll_half",
+	"mout_top0_bus1_pll_half", "mout_top0_cc_pll_half",
+	"mout_top0_mfc_pll_half"};
 PNAME(mout_top0_group3) = {"ioclk_audiocdclk0",
 	"ioclk_audiocdclk1", "ioclk_spdif_extclk",
-	"mout_top0_aud_pll", "mout_top0_half_bus0_pll",
-	"mout_top0_half_bus1_pll"};
-PNAME(mout_top0_group4) = {"ioclk_audiocdclk1", "mout_top0_aud_pll",
-	"mout_top0_half_bus0_pll", "mout_top0_half_bus1_pll"};
+	"mout_top0_aud_pll_user", "mout_top0_bus0_pll_half",
+	"mout_top0_bus1_pll_half"};
+PNAME(mout_top0_group4) = {"ioclk_audiocdclk1", "mout_top0_aud_pll_user",
+	"mout_top0_bus0_pll_half", "mout_top0_bus1_pll_half"};
 
 static unsigned long top0_clk_regs[] __initdata = {
 	MUX_SEL_TOP00,
@@ -277,19 +277,24 @@ static unsigned long top0_clk_regs[] __initdata = {
 };
 
 static struct samsung_mux_clock top0_mux_clks[] __initdata = {
-	MUX(0, "mout_top0_aud_pll", mout_aud_pll_p, MUX_SEL_TOP00, 0, 1),
-	MUX(0, "mout_top0_mfc_pll", mout_mfc_pll_p, MUX_SEL_TOP00, 4, 1),
-	MUX(0, "mout_top0_cc_pll", mout_cc_pll_p, MUX_SEL_TOP00, 8, 1),
-	MUX(0, "mout_top0_bus1_pll", mout_bus1_pll_p, MUX_SEL_TOP00, 12, 1),
-	MUX(0, "mout_top0_bus0_pll", mout_bus0_pll_p, MUX_SEL_TOP00, 16, 1),
-
-	MUX(0, "mout_top0_half_mfc_pll", mout_top0_half_mfc_pll_p,
+	MUX(0, "mout_top0_aud_pll_user", mout_top0_aud_pll_user_p,
+		MUX_SEL_TOP00, 0, 1),
+	MUX(0, "mout_top0_mfc_pll_user", mout_top0_mfc_pll_user_p,
+		MUX_SEL_TOP00, 4, 1),
+	MUX(0, "mout_top0_cc_pll_user", mout_top0_cc_pll_user_p,
+		MUX_SEL_TOP00, 8, 1),
+	MUX(0, "mout_top0_bus1_pll_user", mout_top0_bus1_pll_user_p,
+		MUX_SEL_TOP00, 12, 1),
+	MUX(0, "mout_top0_bus0_pll_user", mout_top0_bus0_pll_user_p,
+		MUX_SEL_TOP00, 16, 1),
+
+	MUX(0, "mout_top0_mfc_pll_half", mout_top0_mfc_pll_half_p,
 		MUX_SEL_TOP01, 4, 1),
-	MUX(0, "mout_top0_half_cc_pll", mout_top0_half_cc_pll_p,
+	MUX(0, "mout_top0_cc_pll_half", mout_top0_cc_pll_half_p,
 		MUX_SEL_TOP01, 8, 1),
-	MUX(0, "mout_top0_half_bus1_pll", mout_top0_half_bus1_pll_p,
+	MUX(0, "mout_top0_bus1_pll_half", mout_top0_bus1_pll_half_p,
 		MUX_SEL_TOP01, 12, 1),
-	MUX(0, "mout_top0_half_bus0_pll", mout_top0_half_bus0_pll_p,
+	MUX(0, "mout_top0_bus0_pll_half", mout_top0_bus0_pll_half_p,
 		MUX_SEL_TOP01, 16, 1),
 
 	MUX(0, "mout_aclk_peric1_66", mout_top0_group1, MUX_SEL_TOP03, 12, 2),
@@ -364,10 +369,12 @@ static struct samsung_gate_clock top0_gate_clks[] __initdata = {
 };
 
 static struct samsung_fixed_factor_clock top0_fixed_factor_clks[] __initdata = {
-	FFACTOR(0, "ffac_top0_bus0_pll_div2", "mout_top0_bus0_pll", 1, 2, 0),
-	FFACTOR(0, "ffac_top0_bus1_pll_div2", "mout_top0_bus1_pll", 1, 2, 0),
-	FFACTOR(0, "ffac_top0_cc_pll_div2", "mout_top0_cc_pll", 1, 2, 0),
-	FFACTOR(0, "ffac_top0_mfc_pll_div2", "mout_top0_mfc_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_bus0_pll_div2", "mout_top0_bus0_pll_user",
+		1, 2, 0),
+	FFACTOR(0, "ffac_top0_bus1_pll_div2", "mout_top0_bus1_pll_user",
+		1, 2, 0),
+	FFACTOR(0, "ffac_top0_cc_pll_div2", "mout_top0_cc_pll_user", 1, 2, 0),
+	FFACTOR(0, "ffac_top0_mfc_pll_div2", "mout_top0_mfc_pll_user", 1, 2, 0),
 };
 
 static struct samsung_cmu_info top0_cmu_info __initdata = {
-- 
1.7.10.4

[PATCH v2 04/12] clk: samsung: exynos7: Corrects CMU_TOP1 clocks names

[Alim Akhtar]

This patch renames CMU_TOP1 clocks names to match with user manual.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c |   50 ++++++++++++++++++++-----------------
 1 file changed, 27 insertions(+), 23 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index 84a6e50..4bc4760a 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -416,23 +416,23 @@ CLK_OF_DECLARE(exynos7_clk_top0, "samsung,exynos7-clock-top0",
 #define ENABLE_SCLK_TOP1_FSYS11		0x0A2C
 
 /* List of parent clocks for Muxes in CMU_TOP1 */
-PNAME(mout_top1_bus0_pll_p)	= { "fin_pll", "dout_sclk_bus0_pll" };
-PNAME(mout_top1_bus1_pll_p)	= { "fin_pll", "dout_sclk_bus1_pll_b" };
-PNAME(mout_top1_cc_pll_p)	= { "fin_pll", "dout_sclk_cc_pll_b" };
-PNAME(mout_top1_mfc_pll_p)	= { "fin_pll", "dout_sclk_mfc_pll_b" };
+PNAME(mout_top1_bus0_pll_user_p)	= { "fin_pll", "sclk_bus0_pll_b" };
+PNAME(mout_top1_bus1_pll_user_p)	= { "fin_pll", "sclk_bus1_pll_b" };
+PNAME(mout_top1_cc_pll_user_p)	= { "fin_pll", "sclk_cc_pll_b" };
+PNAME(mout_top1_mfc_pll_user_p)	= { "fin_pll", "sclk_mfc_pll_b" };
 
-PNAME(mout_top1_half_bus0_pll_p) = {"mout_top1_bus0_pll",
+PNAME(mout_top1_bus0_pll_half_p) = {"mout_top1_bus0_pll_user",
 	"ffac_top1_bus0_pll_div2"};
-PNAME(mout_top1_half_bus1_pll_p) = {"mout_top1_bus1_pll",
+PNAME(mout_top1_bus1_pll_half_p) = {"mout_top1_bus1_pll_user",
 	"ffac_top1_bus1_pll_div2"};
-PNAME(mout_top1_half_cc_pll_p) = {"mout_top1_cc_pll",
+PNAME(mout_top1_cc_pll_half_p) = {"mout_top1_cc_pll_user",
 	"ffac_top1_cc_pll_div2"};
-PNAME(mout_top1_half_mfc_pll_p) = {"mout_top1_mfc_pll",
+PNAME(mout_top1_mfc_pll_half_p) = {"mout_top1_mfc_pll_user",
 	"ffac_top1_mfc_pll_div2"};
 
-PNAME(mout_top1_group1) = {"mout_top1_half_bus0_pll",
-	"mout_top1_half_bus1_pll", "mout_top1_half_cc_pll",
-	"mout_top1_half_mfc_pll"};
+PNAME(mout_top1_group1) = {"mout_top1_bus0_pll_half",
+	"mout_top1_bus1_pll_half", "mout_top1_cc_pll_half",
+	"mout_top1_mfc_pll_half"};
 
 static unsigned long top1_clk_regs[] __initdata = {
 	MUX_SEL_TOP10,
@@ -452,20 +452,22 @@ static unsigned long top1_clk_regs[] __initdata = {
 };
 
 static struct samsung_mux_clock top1_mux_clks[] __initdata = {
-	MUX(0, "mout_top1_mfc_pll", mout_top1_mfc_pll_p, MUX_SEL_TOP10, 4, 1),
-	MUX(0, "mout_top1_cc_pll", mout_top1_cc_pll_p, MUX_SEL_TOP10, 8, 1),
-	MUX(0, "mout_top1_bus1_pll", mout_top1_bus1_pll_p,
+	MUX(0, "mout_top1_mfc_pll_user", mout_top1_mfc_pll_user_p,
+		MUX_SEL_TOP10, 4, 1),
+	MUX(0, "mout_top1_cc_pll_user", mout_top1_cc_pll_user_p,
+		MUX_SEL_TOP10, 8, 1),
+	MUX(0, "mout_top1_bus1_pll_user", mout_top1_bus1_pll_user_p,
 		MUX_SEL_TOP10, 12, 1),
-	MUX(0, "mout_top1_bus0_pll", mout_top1_bus0_pll_p,
+	MUX(0, "mout_top1_bus0_pll_user", mout_top1_bus0_pll_user_p,
 		MUX_SEL_TOP10, 16, 1),
 
-	MUX(0, "mout_top1_half_mfc_pll", mout_top1_half_mfc_pll_p,
+	MUX(0, "mout_top1_mfc_pll_half", mout_top1_mfc_pll_half_p,
 		MUX_SEL_TOP11, 4, 1),
-	MUX(0, "mout_top1_half_cc_pll", mout_top1_half_cc_pll_p,
+	MUX(0, "mout_top1_cc_pll_half", mout_top1_cc_pll_half_p,
 		MUX_SEL_TOP11, 8, 1),
-	MUX(0, "mout_top1_half_bus1_pll", mout_top1_half_bus1_pll_p,
+	MUX(0, "mout_top1_bus1_pll_half", mout_top1_bus1_pll_half_p,
 		MUX_SEL_TOP11, 12, 1),
-	MUX(0, "mout_top1_half_bus0_pll", mout_top1_half_bus0_pll_p,
+	MUX(0, "mout_top1_bus0_pll_half", mout_top1_bus0_pll_half_p,
 		MUX_SEL_TOP11, 16, 1),
 
 	MUX(0, "mout_aclk_fsys1_200", mout_top1_group1, MUX_SEL_TOP13, 24, 2),
@@ -509,10 +511,12 @@ static struct samsung_gate_clock top1_gate_clks[] __initdata = {
 };
 
 static struct samsung_fixed_factor_clock top1_fixed_factor_clks[] __initdata = {
-	FFACTOR(0, "ffac_top1_bus0_pll_div2", "mout_top1_bus0_pll", 1, 2, 0),
-	FFACTOR(0, "ffac_top1_bus1_pll_div2", "mout_top1_bus1_pll", 1, 2, 0),
-	FFACTOR(0, "ffac_top1_cc_pll_div2", "mout_top1_cc_pll", 1, 2, 0),
-	FFACTOR(0, "ffac_top1_mfc_pll_div2", "mout_top1_mfc_pll", 1, 2, 0),
+	FFACTOR(0, "ffac_top1_bus0_pll_div2", "mout_top1_bus0_pll_user",
+		1, 2, 0),
+	FFACTOR(0, "ffac_top1_bus1_pll_div2", "mout_top1_bus1_pll_user",
+		1, 2, 0),
+	FFACTOR(0, "ffac_top1_cc_pll_div2", "mout_top1_cc_pll_user", 1, 2, 0),
+	FFACTOR(0, "ffac_top1_mfc_pll_div2", "mout_top1_mfc_pll_user", 1, 2, 0),
 };
 
 static struct samsung_cmu_info top1_cmu_info __initdata = {
-- 
1.7.10.4

[PATCH v2 5/12] clk: samsung: exynos7: Corrects CMU_CCORE clocks names

[Alim Akhtar]

This patch renames CMU_CCORE clocks names to match with user manual.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index 4bc4760a..b2daf19 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -551,7 +551,7 @@ CLK_OF_DECLARE(exynos7_clk_top1, "samsung,exynos7-clock-top1",
 /*
  * List of parent clocks for Muxes in CMU_CCORE
  */
-PNAME(mout_aclk_ccore_133_p)	= { "fin_pll", "dout_aclk_ccore_133" };
+PNAME(mout_aclk_ccore_133_user_p)	= { "fin_pll", "aclk_ccore_133" };
 
 static unsigned long ccore_clk_regs[] __initdata = {
 	MUX_SEL_CCORE,
@@ -559,7 +559,7 @@ static unsigned long ccore_clk_regs[] __initdata = {
 };
 
 static struct samsung_mux_clock ccore_mux_clks[] __initdata = {
-	MUX(0, "mout_aclk_ccore_133_user", mout_aclk_ccore_133_p,
+	MUX(0, "mout_aclk_ccore_133_user", mout_aclk_ccore_133_user_p,
 		MUX_SEL_CCORE, 1, 1),
 };
 
-- 
1.7.10.4

[PATCH v2 06/12] clk: samsung: exynos7: Corrects CMU_PERIC0 clocks names

[Alim Akhtar]

This patch renames CMU_PERIC0 clocks names to match with user manual.
And also adds missing gate clock for aclk_peric0_66.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c       |   12 ++++++++----
 include/dt-bindings/clock/exynos7-clk.h |    3 ++-
 2 files changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index b2daf19..b819fdd 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -226,6 +226,7 @@ CLK_OF_DECLARE(exynos7_clk_topc, "samsung,exynos7-clock-topc",
 #define DIV_TOP0_PERIC1			0x0634
 #define DIV_TOP0_PERIC2			0x0638
 #define DIV_TOP0_PERIC3			0x063C
+#define ENABLE_ACLK_TOP03		0x080C
 #define ENABLE_SCLK_TOP0_PERIC0		0x0A30
 #define ENABLE_SCLK_TOP0_PERIC1		0x0A34
 #define ENABLE_SCLK_TOP0_PERIC2		0x0A38
@@ -340,6 +341,9 @@ static struct samsung_div_clock top0_div_clks[] __initdata = {
 };
 
 static struct samsung_gate_clock top0_gate_clks[] __initdata = {
+	GATE(CLK_ACLK_PERIC0_66, "aclk_peric0_66", "dout_aclk_peric0_66",
+		ENABLE_ACLK_TOP03, 20, CLK_SET_RATE_PARENT, 0),
+
 	GATE(CLK_SCLK_SPDIF, "sclk_spdif", "dout_sclk_spdif",
 		ENABLE_SCLK_TOP0_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_PCM1, "sclk_pcm1", "dout_sclk_pcm1",
@@ -592,8 +596,8 @@ CLK_OF_DECLARE(exynos7_clk_ccore, "samsung,exynos7-clock-ccore",
 #define ENABLE_SCLK_PERIC0		0x0A00
 
 /* List of parent clocks for Muxes in CMU_PERIC0 */
-PNAME(mout_aclk_peric0_66_p)	= { "fin_pll", "dout_aclk_peric0_66" };
-PNAME(mout_sclk_uart0_p)	= { "fin_pll", "sclk_uart0" };
+PNAME(mout_aclk_peric0_66_user_p)	= { "fin_pll", "aclk_peric0_66" };
+PNAME(mout_sclk_uart0_user_p)	= { "fin_pll", "sclk_uart0" };
 
 static unsigned long peric0_clk_regs[] __initdata = {
 	MUX_SEL_PERIC0,
@@ -602,9 +606,9 @@ static unsigned long peric0_clk_regs[] __initdata = {
 };
 
 static struct samsung_mux_clock peric0_mux_clks[] __initdata = {
-	MUX(0, "mout_aclk_peric0_66_user", mout_aclk_peric0_66_p,
+	MUX(0, "mout_aclk_peric0_66_user", mout_aclk_peric0_66_user_p,
 		MUX_SEL_PERIC0, 0, 1),
-	MUX(0, "mout_sclk_uart0_user", mout_sclk_uart0_p,
+	MUX(0, "mout_sclk_uart0_user", mout_sclk_uart0_user_p,
 		MUX_SEL_PERIC0, 16, 1),
 };
 
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
index d26fe0f..256188a 100644
--- a/include/dt-bindings/clock/exynos7-clk.h
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -49,7 +49,8 @@
 #define CLK_SCLK_SPDIF			12
 #define CLK_SCLK_PCM1			13
 #define CLK_SCLK_I2S1			14
-#define TOP0_NR_CLK			15
+#define CLK_ACLK_PERIC0_66		15
+#define TOP0_NR_CLK			16
 
 /* TOP1 */
 #define DOUT_ACLK_FSYS1_200		1
-- 
1.7.10.4

[PATCH v2 07/12] clk: samsung: exynos7: Corrects CMU_PERIC1 clocks names

[Alim Akhtar]

This patch renames CMU_PERIC1 clocks names to match with user manual.
And also adds missing gate clock for aclk_peric1_66.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c       |   38 ++++++++++++++++---------------
 include/dt-bindings/clock/exynos7-clk.h |    3 ++-
 2 files changed, 22 insertions(+), 19 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index b819fdd..7796712 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -343,6 +343,8 @@ static struct samsung_div_clock top0_div_clks[] __initdata = {
 static struct samsung_gate_clock top0_gate_clks[] __initdata = {
 	GATE(CLK_ACLK_PERIC0_66, "aclk_peric0_66", "dout_aclk_peric0_66",
 		ENABLE_ACLK_TOP03, 20, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_ACLK_PERIC1_66, "aclk_peric1_66", "dout_aclk_peric1_66",
+		ENABLE_ACLK_TOP03, 12, CLK_SET_RATE_PARENT, 0),
 
 	GATE(CLK_SCLK_SPDIF, "sclk_spdif", "dout_sclk_spdif",
 		ENABLE_SCLK_TOP0_PERIC0, 4, CLK_SET_RATE_PARENT, 0),
@@ -665,15 +667,15 @@ CLK_OF_DECLARE(exynos7_clk_peric0, "samsung,exynos7-clock-peric0",
 	exynos7_clk_peric0_init);
 
 /* List of parent clocks for Muxes in CMU_PERIC1 */
-PNAME(mout_aclk_peric1_66_p)	= { "fin_pll", "dout_aclk_peric1_66" };
-PNAME(mout_sclk_uart1_p)	= { "fin_pll", "sclk_uart1" };
-PNAME(mout_sclk_uart2_p)	= { "fin_pll", "sclk_uart2" };
-PNAME(mout_sclk_uart3_p)	= { "fin_pll", "sclk_uart3" };
-PNAME(mout_sclk_spi0_p)		= { "fin_pll", "sclk_spi0" };
-PNAME(mout_sclk_spi1_p)		= { "fin_pll", "sclk_spi1" };
-PNAME(mout_sclk_spi2_p)		= { "fin_pll", "sclk_spi2" };
-PNAME(mout_sclk_spi3_p)		= { "fin_pll", "sclk_spi3" };
-PNAME(mout_sclk_spi4_p)		= { "fin_pll", "sclk_spi4" };
+PNAME(mout_aclk_peric1_66_user_p)	= { "fin_pll", "aclk_peric1_66" };
+PNAME(mout_sclk_uart1_user_p)	= { "fin_pll", "sclk_uart1" };
+PNAME(mout_sclk_uart2_user_p)	= { "fin_pll", "sclk_uart2" };
+PNAME(mout_sclk_uart3_user_p)	= { "fin_pll", "sclk_uart3" };
+PNAME(mout_sclk_spi0_user_p)		= { "fin_pll", "sclk_spi0" };
+PNAME(mout_sclk_spi1_user_p)		= { "fin_pll", "sclk_spi1" };
+PNAME(mout_sclk_spi2_user_p)		= { "fin_pll", "sclk_spi2" };
+PNAME(mout_sclk_spi3_user_p)		= { "fin_pll", "sclk_spi3" };
+PNAME(mout_sclk_spi4_user_p)		= { "fin_pll", "sclk_spi4" };
 
 static unsigned long peric1_clk_regs[] __initdata = {
 	MUX_SEL_PERIC10,
@@ -684,24 +686,24 @@ static unsigned long peric1_clk_regs[] __initdata = {
 };
 
 static struct samsung_mux_clock peric1_mux_clks[] __initdata = {
-	MUX(0, "mout_aclk_peric1_66_user", mout_aclk_peric1_66_p,
+	MUX(0, "mout_aclk_peric1_66_user", mout_aclk_peric1_66_user_p,
 		MUX_SEL_PERIC10, 0, 1),
 
-	MUX_F(0, "mout_sclk_spi0_user", mout_sclk_spi0_p,
+	MUX_F(0, "mout_sclk_spi0_user", mout_sclk_spi0_user_p,
 		MUX_SEL_PERIC11, 0, 1, CLK_SET_RATE_PARENT, 0),
-	MUX_F(0, "mout_sclk_spi1_user", mout_sclk_spi1_p,
+	MUX_F(0, "mout_sclk_spi1_user", mout_sclk_spi1_user_p,
 		MUX_SEL_PERIC11, 4, 1, CLK_SET_RATE_PARENT, 0),
-	MUX_F(0, "mout_sclk_spi2_user", mout_sclk_spi2_p,
+	MUX_F(0, "mout_sclk_spi2_user", mout_sclk_spi2_user_p,
 		MUX_SEL_PERIC11, 8, 1, CLK_SET_RATE_PARENT, 0),
-	MUX_F(0, "mout_sclk_spi3_user", mout_sclk_spi3_p,
+	MUX_F(0, "mout_sclk_spi3_user", mout_sclk_spi3_user_p,
 		MUX_SEL_PERIC11, 12, 1, CLK_SET_RATE_PARENT, 0),
-	MUX_F(0, "mout_sclk_spi4_user", mout_sclk_spi4_p,
+	MUX_F(0, "mout_sclk_spi4_user", mout_sclk_spi4_user_p,
 		MUX_SEL_PERIC11, 16, 1, CLK_SET_RATE_PARENT, 0),
-	MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_p,
+	MUX(0, "mout_sclk_uart1_user", mout_sclk_uart1_user_p,
 		MUX_SEL_PERIC11, 20, 1),
-	MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_p,
+	MUX(0, "mout_sclk_uart2_user", mout_sclk_uart2_user_p,
 		MUX_SEL_PERIC11, 24, 1),
-	MUX(0, "mout_sclk_uart3_user", mout_sclk_uart3_p,
+	MUX(0, "mout_sclk_uart3_user", mout_sclk_uart3_user_p,
 		MUX_SEL_PERIC11, 28, 1),
 };
 
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
index 256188a..2876654 100644
--- a/include/dt-bindings/clock/exynos7-clk.h
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -50,7 +50,8 @@
 #define CLK_SCLK_PCM1			13
 #define CLK_SCLK_I2S1			14
 #define CLK_ACLK_PERIC0_66		15
-#define TOP0_NR_CLK			16
+#define CLK_ACLK_PERIC1_66		16
+#define TOP0_NR_CLK			17
 
 /* TOP1 */
 #define DOUT_ACLK_FSYS1_200		1
-- 
1.7.10.4

[PATCH v2 08/12] clk: samsung: exynos7: Corrects CMU_PERIS clocks names

[Alim Akhtar]

This patch renames CMU_PERIS clocks names to match with user manual.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index 7796712..ae6836e 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -791,7 +791,7 @@ CLK_OF_DECLARE(exynos7_clk_peric1, "samsung,exynos7-clock-peric1",
 #define ENABLE_SCLK_PERIS_SECURE_CHIPID	0x0A10
 
 /* List of parent clocks for Muxes in CMU_PERIS */
-PNAME(mout_aclk_peris_66_p) = { "fin_pll", "dout_aclk_peris_66" };
+PNAME(mout_aclk_peris_66_user_p) = { "fin_pll", "aclk_peris_66" };
 
 static unsigned long peris_clk_regs[] __initdata = {
 	MUX_SEL_PERIS,
@@ -803,7 +803,7 @@ static unsigned long peris_clk_regs[] __initdata = {
 
 static struct samsung_mux_clock peris_mux_clks[] __initdata = {
 	MUX(0, "mout_aclk_peris_66_user",
-		mout_aclk_peris_66_p, MUX_SEL_PERIS, 0, 1),
+		mout_aclk_peris_66_user_p, MUX_SEL_PERIS, 0, 1),
 };
 
 static struct samsung_gate_clock peris_gate_clks[] __initdata = {
-- 
1.7.10.4

[PATCH v2 09/12] clk: samsung: exynos7: Corrects CMU_FSYS0 clocks names

[Alim Akhtar]

This patch renames CMU_FSYS0 clocks names to match with user manual.
And also adds missing gate clock for aclk_fsys0_200.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c       |   24 ++++++++++++++----------
 include/dt-bindings/clock/exynos7-clk.h |    3 ++-
 2 files changed, 16 insertions(+), 11 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index ae6836e..bf4699c 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -514,6 +514,9 @@ static struct samsung_gate_clock top1_gate_clks[] __initdata = {
 		ENABLE_SCLK_TOP1_FSYS11, 0, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "dout_sclk_mmc0",
 		ENABLE_SCLK_TOP1_FSYS11, 12, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_ACLK_FSYS0_200, "aclk_fsys0_200", "dout_aclk_fsys0_200",
+		ENABLE_ACLK_TOP13, 28, CLK_SET_RATE_PARENT, 0),
 };
 
 static struct samsung_fixed_factor_clock top1_fixed_factor_clks[] __initdata = {
@@ -851,13 +854,13 @@ CLK_OF_DECLARE(exynos7_clk_peris, "samsung,exynos7-clock-peris",
 /*
  * List of parent clocks for Muxes in CMU_FSYS0
  */
-PNAME(mout_aclk_fsys0_200_p)	= { "fin_pll", "dout_aclk_fsys0_200" };
-PNAME(mout_sclk_mmc2_p)		= { "fin_pll", "sclk_mmc2" };
+PNAME(mout_aclk_fsys0_200_user_p)	= { "fin_pll", "aclk_fsys0_200" };
+PNAME(mout_sclk_mmc2_user_p)		= { "fin_pll", "sclk_mmc2" };
 
-PNAME(mout_sclk_usbdrd300_p)	= { "fin_pll", "sclk_usbdrd300" };
-PNAME(mout_phyclk_usbdrd300_udrd30_phyclk_p)	= { "fin_pll",
+PNAME(mout_sclk_usbdrd300_user_p)	= { "fin_pll", "sclk_usbdrd300" };
+PNAME(mout_phyclk_usbdrd300_udrd30_phyclk_user_p)	= { "fin_pll",
 				"phyclk_usbdrd300_udrd30_phyclock" };
-PNAME(mout_phyclk_usbdrd300_udrd30_pipe_pclk_p)	= { "fin_pll",
+PNAME(mout_phyclk_usbdrd300_udrd30_pipe_pclk_user_p)	= { "fin_pll",
 				"phyclk_usbdrd300_udrd30_pipe_pclk" };
 
 /* fixed rate clocks used in the FSYS0 block */
@@ -880,18 +883,19 @@ static unsigned long fsys0_clk_regs[] __initdata = {
 };
 
 static struct samsung_mux_clock fsys0_mux_clks[] __initdata = {
-	MUX(0, "mout_aclk_fsys0_200_user", mout_aclk_fsys0_200_p,
+	MUX(0, "mout_aclk_fsys0_200_user", mout_aclk_fsys0_200_user_p,
 		MUX_SEL_FSYS00, 24, 1),
 
-	MUX(0, "mout_sclk_mmc2_user", mout_sclk_mmc2_p, MUX_SEL_FSYS01, 24, 1),
-	MUX(0, "mout_sclk_usbdrd300_user", mout_sclk_usbdrd300_p,
+	MUX(0, "mout_sclk_mmc2_user", mout_sclk_mmc2_user_p,
+		MUX_SEL_FSYS01, 24, 1),
+	MUX(0, "mout_sclk_usbdrd300_user", mout_sclk_usbdrd300_user_p,
 		MUX_SEL_FSYS01, 28, 1),
 
 	MUX(0, "mout_phyclk_usbdrd300_udrd30_pipe_pclk_user",
-		mout_phyclk_usbdrd300_udrd30_pipe_pclk_p,
+		mout_phyclk_usbdrd300_udrd30_pipe_pclk_user_p,
 		MUX_SEL_FSYS02, 24, 1),
 	MUX(0, "mout_phyclk_usbdrd300_udrd30_phyclk_user",
-		mout_phyclk_usbdrd300_udrd30_phyclk_p,
+		mout_phyclk_usbdrd300_udrd30_phyclk_user_p,
 		MUX_SEL_FSYS02, 28, 1),
 };
 
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
index 2876654..667faed 100644
--- a/include/dt-bindings/clock/exynos7-clk.h
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -62,7 +62,8 @@
 #define CLK_SCLK_MMC2			6
 #define CLK_SCLK_MMC1			7
 #define CLK_SCLK_MMC0			8
-#define TOP1_NR_CLK			9
+#define CLK_ACLK_FSYS0_200		9
+#define TOP1_NR_CLK			10
 
 /* CCORE */
 #define PCLK_RTC			1
-- 
1.7.10.4

[PATCH v2 10/12] clk: samsung: exynos7: Corrects CMU_FSYS1 clocks names

[Alim Akhtar]

This patch renames CMU_FSYS1 clocks names to match with user manual.
And also adds missing gate clock for aclk_fsys1_200.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c       |   16 ++++++++++------
 include/dt-bindings/clock/exynos7-clk.h |    3 ++-
 2 files changed, 12 insertions(+), 7 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index bf4699c..189a453 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -517,6 +517,8 @@ static struct samsung_gate_clock top1_gate_clks[] __initdata = {
 
 	GATE(CLK_ACLK_FSYS0_200, "aclk_fsys0_200", "dout_aclk_fsys0_200",
 		ENABLE_ACLK_TOP13, 28, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_ACLK_FSYS1_200, "aclk_fsys1_200", "dout_aclk_fsys1_200",
+		ENABLE_ACLK_TOP13, 24, CLK_SET_RATE_PARENT, 0),
 };
 
 static struct samsung_fixed_factor_clock top1_fixed_factor_clks[] __initdata = {
@@ -959,9 +961,9 @@ CLK_OF_DECLARE(exynos7_clk_fsys0, "samsung,exynos7-clock-fsys0",
 /*
  * List of parent clocks for Muxes in CMU_FSYS1
  */
-PNAME(mout_aclk_fsys1_200_p)	= { "fin_pll",  "dout_aclk_fsys1_200" };
-PNAME(mout_sclk_mmc0_p)		= { "fin_pll", "sclk_mmc0" };
-PNAME(mout_sclk_mmc1_p)		= { "fin_pll", "sclk_mmc1" };
+PNAME(mout_aclk_fsys1_200_user_p)	= { "fin_pll", "aclk_fsys1_200" };
+PNAME(mout_sclk_mmc0_user_p)		= { "fin_pll", "sclk_mmc0" };
+PNAME(mout_sclk_mmc1_user_p)		= { "fin_pll", "sclk_mmc1" };
 
 static unsigned long fsys1_clk_regs[] __initdata = {
 	MUX_SEL_FSYS10,
@@ -970,11 +972,13 @@ static unsigned long fsys1_clk_regs[] __initdata = {
 };
 
 static struct samsung_mux_clock fsys1_mux_clks[] __initdata = {
-	MUX(0, "mout_aclk_fsys1_200_user", mout_aclk_fsys1_200_p,
+	MUX(0, "mout_aclk_fsys1_200_user", mout_aclk_fsys1_200_user_p,
 		MUX_SEL_FSYS10, 28, 1),
 
-	MUX(0, "mout_sclk_mmc1_user", mout_sclk_mmc1_p, MUX_SEL_FSYS11, 24, 1),
-	MUX(0, "mout_sclk_mmc0_user", mout_sclk_mmc0_p, MUX_SEL_FSYS11, 28, 1),
+	MUX(0, "mout_sclk_mmc1_user", mout_sclk_mmc1_user_p,
+		MUX_SEL_FSYS11, 24, 1),
+	MUX(0, "mout_sclk_mmc0_user", mout_sclk_mmc0_user_p,
+		MUX_SEL_FSYS11, 28, 1),
 };
 
 static struct samsung_gate_clock fsys1_gate_clks[] __initdata = {
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
index 667faed..acdf2e5 100644
--- a/include/dt-bindings/clock/exynos7-clk.h
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -63,7 +63,8 @@
 #define CLK_SCLK_MMC1			7
 #define CLK_SCLK_MMC0			8
 #define CLK_ACLK_FSYS0_200		9
-#define TOP1_NR_CLK			10
+#define CLK_ACLK_FSYS1_200		10
+#define TOP1_NR_CLK			11
 
 /* CCORE */
 #define PCLK_RTC			1
-- 
1.7.10.4

[PATCH v2 11/12] clk: samsung: exynos7: Add missing fixed_clks to cmu_info

[Alim Akhtar]

FSYS0 fixed clocks are not added to fsys0_cmu_info, this make
some of the usb clocks as orphan. This fixes the same.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index 189a453..d4c6e47 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -936,6 +936,8 @@ static struct samsung_gate_clock fsys0_gate_clks[] __initdata = {
 };
 
 static struct samsung_cmu_info fsys0_cmu_info __initdata = {
+	.fixed_clks		= fixed_rate_clks_fsys0,
+	.nr_fixed_clks		= ARRAY_SIZE(fixed_rate_clks_fsys0),
 	.mux_clks		= fsys0_mux_clks,
 	.nr_mux_clks		= ARRAY_SIZE(fsys0_mux_clks),
 	.gate_clks		= fsys0_gate_clks,
-- 
1.7.10.4

[PATCH v2 12/12] clk: samsung: exynos7: Add required clock tree for UFS

[Alim Akhtar]

Adding required mux/div/gate clocks for UFS controller
present on Exynos7.

Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
 drivers/clk/samsung/clk-exynos7.c       |  107 +++++++++++++++++++++++++++++++
 include/dt-bindings/clock/exynos7-clk.h |   24 ++++++-
 2 files changed, 129 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/samsung/clk-exynos7.c b/drivers/clk/samsung/clk-exynos7.c
index d4c6e47..cd25661 100644
--- a/drivers/clk/samsung/clk-exynos7.c
+++ b/drivers/clk/samsung/clk-exynos7.c
@@ -479,12 +479,21 @@ static struct samsung_mux_clock top1_mux_clks[] __initdata = {
 	MUX(0, "mout_aclk_fsys1_200", mout_top1_group1, MUX_SEL_TOP13, 24, 2),
 	MUX(0, "mout_aclk_fsys0_200", mout_top1_group1, MUX_SEL_TOP13, 28, 2),
 
+	MUX(0, "mout_sclk_phy_fsys0_26m", mout_top1_group1,
+		MUX_SEL_TOP1_FSYS0, 0, 2),
 	MUX(0, "mout_sclk_mmc2", mout_top1_group1, MUX_SEL_TOP1_FSYS0, 16, 2),
 	MUX(0, "mout_sclk_usbdrd300", mout_top1_group1,
 		MUX_SEL_TOP1_FSYS0, 28, 2),
 
+	MUX(0, "mout_sclk_phy_fsys1", mout_top1_group1,
+		MUX_SEL_TOP1_FSYS1, 0, 2),
+	MUX(0, "mout_sclk_ufsunipro20", mout_top1_group1,
+		MUX_SEL_TOP1_FSYS1, 16, 2),
+
 	MUX(0, "mout_sclk_mmc1", mout_top1_group1, MUX_SEL_TOP1_FSYS11, 0, 2),
 	MUX(0, "mout_sclk_mmc0", mout_top1_group1, MUX_SEL_TOP1_FSYS11, 12, 2),
+	MUX(0, "mout_sclk_phy_fsys1_26m", mout_top1_group1,
+		MUX_SEL_TOP1_FSYS11, 24, 2),
 };
 
 static struct samsung_div_clock top1_div_clks[] __initdata = {
@@ -493,6 +502,13 @@ static struct samsung_div_clock top1_div_clks[] __initdata = {
 	DIV(DOUT_ACLK_FSYS0_200, "dout_aclk_fsys0_200", "mout_aclk_fsys0_200",
 		DIV_TOP13, 28, 4),
 
+	DIV(DOUT_SCLK_PHY_FSYS1, "dout_sclk_phy_fsys1",
+		"mout_sclk_phy_fsys1", DIV_TOP1_FSYS1, 0, 6),
+
+	DIV(DOUT_SCLK_UFSUNIPRO20, "dout_sclk_ufsunipro20",
+		"mout_sclk_ufsunipro20",
+		DIV_TOP1_FSYS1, 16, 6),
+
 	DIV(DOUT_SCLK_MMC2, "dout_sclk_mmc2", "mout_sclk_mmc2",
 		DIV_TOP1_FSYS0, 16, 10),
 	DIV(0, "dout_sclk_usbdrd300", "mout_sclk_usbdrd300",
@@ -502,6 +518,9 @@ static struct samsung_div_clock top1_div_clks[] __initdata = {
 		DIV_TOP1_FSYS11, 0, 10),
 	DIV(DOUT_SCLK_MMC0, "dout_sclk_mmc0", "mout_sclk_mmc0",
 		DIV_TOP1_FSYS11, 12, 10),
+
+	DIV(DOUT_SCLK_PHY_FSYS1_26M, "dout_sclk_phy_fsys1_26m",
+		"mout_sclk_phy_fsys1_26m", DIV_TOP1_FSYS11, 24, 6),
 };
 
 static struct samsung_gate_clock top1_gate_clks[] __initdata = {
@@ -510,6 +529,12 @@ static struct samsung_gate_clock top1_gate_clks[] __initdata = {
 	GATE(0, "sclk_usbdrd300", "dout_sclk_usbdrd300",
 		ENABLE_SCLK_TOP1_FSYS0, 28, 0, 0),
 
+	GATE(CLK_SCLK_PHY_FSYS1, "sclk_phy_fsys1", "dout_sclk_phy_fsys1",
+		ENABLE_SCLK_TOP1_FSYS1, 0, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_SCLK_UFSUNIPRO20, "sclk_ufsunipro20", "dout_sclk_ufsunipro20",
+		ENABLE_SCLK_TOP1_FSYS1, 16, CLK_SET_RATE_PARENT, 0),
+
 	GATE(CLK_SCLK_MMC1, "sclk_mmc1", "dout_sclk_mmc1",
 		ENABLE_SCLK_TOP1_FSYS11, 0, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "dout_sclk_mmc0",
@@ -519,6 +544,10 @@ static struct samsung_gate_clock top1_gate_clks[] __initdata = {
 		ENABLE_ACLK_TOP13, 28, CLK_SET_RATE_PARENT, 0),
 	GATE(CLK_ACLK_FSYS1_200, "aclk_fsys1_200", "dout_aclk_fsys1_200",
 		ENABLE_ACLK_TOP13, 24, CLK_SET_RATE_PARENT, 0),
+
+	GATE(CLK_SCLK_PHY_FSYS1_26M, "sclk_phy_fsys1_26m",
+		"dout_sclk_phy_fsys1_26m", ENABLE_SCLK_TOP1_FSYS11,
+		24, CLK_SET_RATE_PARENT, 0),
 };
 
 static struct samsung_fixed_factor_clock top1_fixed_factor_clks[] __initdata = {
@@ -958,22 +987,54 @@ CLK_OF_DECLARE(exynos7_clk_fsys0, "samsung,exynos7-clock-fsys0",
 /* Register Offset definitions for CMU_FSYS1 (0x156E0000) */
 #define MUX_SEL_FSYS10			0x0200
 #define MUX_SEL_FSYS11			0x0204
+#define MUX_SEL_FSYS12			0x0208
+#define DIV_FSYS1			0x0600
 #define ENABLE_ACLK_FSYS1		0x0800
+#define ENABLE_PCLK_FSYS1               0x0900
+#define ENABLE_SCLK_FSYS11              0x0A04
+#define ENABLE_SCLK_FSYS12              0x0A08
+#define ENABLE_SCLK_FSYS13              0x0A0C
 
 /*
  * List of parent clocks for Muxes in CMU_FSYS1
  */
 PNAME(mout_aclk_fsys1_200_user_p)	= { "fin_pll", "aclk_fsys1_200" };
+PNAME(mout_fsys1_group_p)	= { "fin_pll", "fin_pll_26m",
+				"sclk_phy_fsys1_26m" };
 PNAME(mout_sclk_mmc0_user_p)		= { "fin_pll", "sclk_mmc0" };
 PNAME(mout_sclk_mmc1_user_p)		= { "fin_pll", "sclk_mmc1" };
+PNAME(mout_sclk_ufsunipro20_user_p)  = { "fin_pll", "sclk_ufsunipro20" };
+PNAME(mout_phyclk_ufs20_tx0_user_p) = { "fin_pll", "phyclk_ufs20_tx0_symbol" };
+PNAME(mout_phyclk_ufs20_rx0_user_p) = { "fin_pll", "phyclk_ufs20_rx0_symbol" };
+PNAME(mout_phyclk_ufs20_rx1_user_p) = { "fin_pll", "phyclk_ufs20_rx1_symbol" };
+
+/* fixed rate clocks used in the FSYS1 block */
+struct samsung_fixed_rate_clock fixed_rate_clks_fsys1[] __initdata = {
+	FRATE(PHYCLK_UFS20_TX0_SYMBOL, "phyclk_ufs20_tx0_symbol", NULL,
+			CLK_IS_ROOT, 300000000),
+	FRATE(PHYCLK_UFS20_RX0_SYMBOL, "phyclk_ufs20_rx0_symbol", NULL,
+			CLK_IS_ROOT, 300000000),
+	FRATE(PHYCLK_UFS20_RX1_SYMBOL, "phyclk_ufs20_rx1_symbol", NULL,
+			CLK_IS_ROOT, 300000000),
+};
 
 static unsigned long fsys1_clk_regs[] __initdata = {
 	MUX_SEL_FSYS10,
 	MUX_SEL_FSYS11,
+	MUX_SEL_FSYS12,
+	DIV_FSYS1,
 	ENABLE_ACLK_FSYS1,
+	ENABLE_PCLK_FSYS1,
+	ENABLE_SCLK_FSYS11,
+	ENABLE_SCLK_FSYS12,
+	ENABLE_SCLK_FSYS13,
 };
 
 static struct samsung_mux_clock fsys1_mux_clks[] __initdata = {
+	MUX(MOUT_FSYS1_PHYCLK_SEL1, "mout_fsys1_phyclk_sel1",
+		mout_fsys1_group_p, MUX_SEL_FSYS10, 16, 2),
+	MUX(0, "mout_fsys1_phyclk_sel0", mout_fsys1_group_p,
+		 MUX_SEL_FSYS10, 20, 2),
 	MUX(0, "mout_aclk_fsys1_200_user", mout_aclk_fsys1_200_user_p,
 		MUX_SEL_FSYS10, 28, 1),
 
@@ -981,18 +1042,64 @@ static struct samsung_mux_clock fsys1_mux_clks[] __initdata = {
 		MUX_SEL_FSYS11, 24, 1),
 	MUX(0, "mout_sclk_mmc0_user", mout_sclk_mmc0_user_p,
 		MUX_SEL_FSYS11, 28, 1),
+	MUX(0, "mout_sclk_ufsunipro20_user", mout_sclk_ufsunipro20_user_p,
+		MUX_SEL_FSYS11, 20, 1),
+
+	MUX(0, "mout_phyclk_ufs20_rx1_symbol_user",
+		mout_phyclk_ufs20_rx1_user_p, MUX_SEL_FSYS12, 16, 1),
+	MUX(0, "mout_phyclk_ufs20_rx0_symbol_user",
+		mout_phyclk_ufs20_rx0_user_p, MUX_SEL_FSYS12, 24, 1),
+	MUX(0, "mout_phyclk_ufs20_tx0_symbol_user",
+		mout_phyclk_ufs20_tx0_user_p, MUX_SEL_FSYS12, 28, 1),
+};
+
+static struct samsung_div_clock fsys1_div_clks[] __initdata = {
+	DIV(DOUT_PCLK_FSYS1, "dout_pclk_fsys1", "mout_aclk_fsys1_200_user",
+		DIV_FSYS1, 0, 2),
 };
 
 static struct samsung_gate_clock fsys1_gate_clks[] __initdata = {
+	GATE(SCLK_UFSUNIPRO20_USER, "sclk_ufsunipro20_user",
+		"mout_sclk_ufsunipro20_user",
+		ENABLE_SCLK_FSYS11, 20, 0, 0),
+
 	GATE(ACLK_MMC1, "aclk_mmc1", "mout_aclk_fsys1_200_user",
 		ENABLE_ACLK_FSYS1, 29, 0, 0),
 	GATE(ACLK_MMC0, "aclk_mmc0", "mout_aclk_fsys1_200_user",
 		ENABLE_ACLK_FSYS1, 30, 0, 0),
+
+	GATE(ACLK_UFS20_LINK, "aclk_ufs20_link", "dout_pclk_fsys1",
+		ENABLE_ACLK_FSYS1, 31, 0, 0),
+	GATE(PCLK_GPIO_FSYS1, "pclk_gpio_fsys1", "mout_aclk_fsys1_200_user",
+		ENABLE_PCLK_FSYS1, 30, 0, 0),
+
+	GATE(PHYCLK_UFS20_RX1_SYMBOL_USER, "phyclk_ufs20_rx1_symbol_user",
+		"mout_phyclk_ufs20_rx1_symbol_user",
+		ENABLE_SCLK_FSYS12, 16, 0, 0),
+	GATE(PHYCLK_UFS20_RX0_SYMBOL_USER, "phyclk_ufs20_rx0_symbol_user",
+		"mout_phyclk_ufs20_rx0_symbol_user",
+		ENABLE_SCLK_FSYS12, 24, 0, 0),
+	GATE(PHYCLK_UFS20_TX0_SYMBOL_USER, "phyclk_ufs20_tx0_symbol_user",
+		"mout_phyclk_ufs20_tx0_symbol_user",
+		ENABLE_SCLK_FSYS12, 28, 0, 0),
+
+	GATE(OSCCLK_PHY_CLKOUT_EMBEDDED_COMBO_PHY,
+		"oscclk_phy_clkout_embedded_combo_phy",
+		"fin_pll",
+		ENABLE_SCLK_FSYS12, 4, CLK_IGNORE_UNUSED, 0),
+
+	GATE(SCLK_COMBO_PHY_EMBEDDED_26M, "sclk_combo_phy_embedded_26m",
+		"mout_fsys1_phyclk_sel1",
+		ENABLE_SCLK_FSYS13, 24, CLK_IGNORE_UNUSED, 0),
 };
 
 static struct samsung_cmu_info fsys1_cmu_info __initdata = {
+	.fixed_clks		= fixed_rate_clks_fsys1,
+	.nr_fixed_clks		= ARRAY_SIZE(fixed_rate_clks_fsys1),
 	.mux_clks		= fsys1_mux_clks,
 	.nr_mux_clks		= ARRAY_SIZE(fsys1_mux_clks),
+	.div_clks		= fsys1_div_clks,
+	.nr_div_clks		= ARRAY_SIZE(fsys1_div_clks),
 	.gate_clks		= fsys1_gate_clks,
 	.nr_gate_clks		= ARRAY_SIZE(fsys1_gate_clks),
 	.nr_clk_ids		= FSYS1_NR_CLK,
diff --git a/include/dt-bindings/clock/exynos7-clk.h b/include/dt-bindings/clock/exynos7-clk.h
index acdf2e5..10c5586 100644
--- a/include/dt-bindings/clock/exynos7-clk.h
+++ b/include/dt-bindings/clock/exynos7-clk.h
@@ -64,7 +64,14 @@
 #define CLK_SCLK_MMC0			8
 #define CLK_ACLK_FSYS0_200		9
 #define CLK_ACLK_FSYS1_200		10
-#define TOP1_NR_CLK			11
+#define CLK_SCLK_PHY_FSYS1		11
+#define CLK_SCLK_PHY_FSYS1_26M		12
+#define MOUT_SCLK_UFSUNIPRO20		13
+#define DOUT_SCLK_UFSUNIPRO20		14
+#define CLK_SCLK_UFSUNIPRO20		15
+#define DOUT_SCLK_PHY_FSYS1		16
+#define DOUT_SCLK_PHY_FSYS1_26M		17
+#define TOP1_NR_CLK			18
 
 /* CCORE */
 #define PCLK_RTC			1
@@ -139,7 +146,20 @@
 /* FSYS1 */
 #define ACLK_MMC1			1
 #define ACLK_MMC0			2
-#define FSYS1_NR_CLK			3
+#define PHYCLK_UFS20_TX0_SYMBOL		3
+#define PHYCLK_UFS20_RX0_SYMBOL		4
+#define PHYCLK_UFS20_RX1_SYMBOL		5
+#define ACLK_UFS20_LINK			6
+#define SCLK_UFSUNIPRO20_USER		7
+#define PHYCLK_UFS20_RX1_SYMBOL_USER	8
+#define PHYCLK_UFS20_RX0_SYMBOL_USER	9
+#define PHYCLK_UFS20_TX0_SYMBOL_USER	10
+#define OSCCLK_PHY_CLKOUT_EMBEDDED_COMBO_PHY	11
+#define SCLK_COMBO_PHY_EMBEDDED_26M	12
+#define DOUT_PCLK_FSYS1			13
+#define PCLK_GPIO_FSYS1			14
+#define MOUT_FSYS1_PHYCLK_SEL1		15
+#define FSYS1_NR_CLK			16
 
 /* MSCL */
 #define USERMUX_ACLK_MSCL_532		1
-- 
1.7.10.4

Re: [PATCH v2 01/12] clk: samsung: exynos7: Change the CMU_TOPC block clock names

[Krzysztof Kozlowski]

On 10.09.2015 17:44, Alim Akhtar wrote:
> Corrects the CMU_TOPC block clock names as per user manual.
> This does not change any functionalities.
> 
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos7.c |   70 ++++++++++++++++++++-----------------
>  1 file changed, 37 insertions(+), 33 deletions(-)
> 

Looks good now:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

Re: [PATCH v2 02/12] clk: samsung: exynos7: Adds missing clocks gates of CMU_TOPC

[Krzysztof Kozlowski]

On 10.09.2015 17:44, Alim Akhtar wrote:
> This adds some of the missing GATE clocks of CMU_TOPC block.
> 
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos7.c       |   27 +++++++++++++++++++++++++++
>  include/dt-bindings/clock/exynos7-clk.h |   13 ++++++++++++-
>  2 files changed, 39 insertions(+), 1 deletion(-)


Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

Re: [PATCH v2 5/12] clk: samsung: exynos7: Corrects CMU_CCORE clocks names

[Krzysztof Kozlowski]

On 10.09.2015 17:44, Alim Akhtar wrote:
> This patch renames CMU_CCORE clocks names to match with user manual.
> 
> Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos7.c |    4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 

Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof

Re: [PATCH v2 00/12] clk: samsung: exynos7: Cleanup of clock file

[Sylwester Nawrocki]

On 10/09/15 10:44, Alim Akhtar wrote:
> Currently there are lots of ambiguity between clock names in clock file
> and in user manual, which leads to lots of confusion for the reviewers.
> This series attempts to cleanup the exynos7 clock file as per
> user manual naming convention.
> This also adds some of the missing Gate clocks which are needed
> to complete the clock tree.

The whole series applied, thanks.

Re: [PATCH v2 00/12] clk: samsung: exynos7: Cleanup of clock file

[Alim Akhtar]

Hi Sylwester,

On 09/15/2015 02:55 PM, Sylwester Nawrocki wrote:
> On 10/09/15 10:44, Alim Akhtar wrote:
>> Currently there are lots of ambiguity between clock names in clock file
>> and in user manual, which leads to lots of confusion for the reviewers.
>> This series attempts to cleanup the exynos7 clock file as per
>> user manual naming convention.
>> This also adds some of the missing Gate clocks which are needed
>> to complete the clock tree.
>
> The whole series applied, thanks.
>
Thanks!!