From: Stefan Wahren <stefan.wahren@i2se.com>
To: Victorien Vedrine <victorien.vedrine@ophrys.net>,
linux-kernel@vger.kernel.org
Cc: linux-clk@vger.kernel.org, sboyd@codeaurora.org,
mturquette@baylibre.com, shawn.guo@linaro.org,
"Fabio.Estevam@freescale.com" <Fabio.Estevam@freescale.com>,
Marek Vasut <marex@denx.de>
Subject: Re: [PATCH v2] clk:mxs: Fix bug on frequency divider
Date: Wed, 16 Sep 2015 16:16:23 +0200 [thread overview]
Message-ID: <55F979B7.2040105@i2se.com> (raw)
In-Reply-To: <1441010707-17178-1-git-send-email-victorien.vedrine@ophrys.net>
+Fabio
+Marek
> On drivers/clk/mxs/clk-frac.c, the function clk_frac_round_rate returned a bad
> result. The division before multiplication computes a wrong value ; the
> calculation is inverted to fix the problem. The second issue is that the exact
> rate have decimals and they are truncate. The consequence is that the function
> clk_frac_set_rate (which use the result of clk_frac_round_rate) computes a
> wrong value for the register (the rate generated can be closer to the desired
> rate). The correction is : if there is decimal to the result, it is rounded to
> the next larger integer.
> On drivers/clk/mxs/clk-frac.c, the function clk_frac_recalc_rate returned
> a bad result. The multiplication is made before the division to compute a
> correct value.
>
> Signed-off-by: Victorien Vedrine <victorien.vedrine@ophrys.net>
> ---
> drivers/clk/mxs/clk-frac.c | 12 +++++++++---
> 1 file changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/mxs/clk-frac.c b/drivers/clk/mxs/clk-frac.c
> index e6aa6b5..b3fa7fa 100644
> --- a/drivers/clk/mxs/clk-frac.c
> +++ b/drivers/clk/mxs/clk-frac.c
> @@ -42,11 +42,13 @@ static unsigned long clk_frac_recalc_rate(struct clk_hw *hw,
> {
> struct clk_frac *frac = to_clk_frac(hw);
> u32 div;
> + u64 tmp_rate;
>
> div = readl_relaxed(frac->reg) >> frac->shift;
> div &= (1 << frac->width) - 1;
>
> - return (parent_rate >> frac->width) * div;
> + tmp_rate = (u64)parent_rate * div;
> + return tmp_rate >> frac->width;
> }
>
> static long clk_frac_round_rate(struct clk_hw *hw, unsigned long rate,
> @@ -55,7 +57,7 @@ static long clk_frac_round_rate(struct clk_hw *hw, unsigned long rate,
> struct clk_frac *frac = to_clk_frac(hw);
> unsigned long parent_rate = *prate;
> u32 div;
> - u64 tmp;
> + u64 tmp, tmp_rate, result;
>
> if (rate > parent_rate)
> return -EINVAL;
> @@ -68,7 +70,11 @@ static long clk_frac_round_rate(struct clk_hw *hw, unsigned long rate,
> if (!div)
> return -EINVAL;
>
> - return (parent_rate >> frac->width) * div;
> + tmp_rate = (u64)parent_rate * div;
> + result = tmp_rate >> frac->width;
> + if ((result << frac->width) < tmp_rate)
> + result += 1;
> + return result;
> }
>
> static int clk_frac_set_rate(struct clk_hw *hw, unsigned long rate,
next prev parent reply other threads:[~2015-09-16 14:16 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-31 16:24 [PATCH] clk:mxs: Fix bug on frequency divider Victorien Vedrine
2015-07-31 17:34 ` Stephen Boyd
2015-08-19 10:29 ` victorien.vedrine
2015-08-31 8:45 ` [PATCH v2] " Victorien Vedrine
2015-09-16 14:16 ` Stefan Wahren [this message]
2015-09-18 7:21 ` Stefan Wahren
2015-09-24 12:17 ` Shawn Guo
2015-10-01 22:25 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=55F979B7.2040105@i2se.com \
--to=stefan.wahren@i2se.com \
--cc=Fabio.Estevam@freescale.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marex@denx.de \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=shawn.guo@linaro.org \
--cc=victorien.vedrine@ophrys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).