From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from szxga03-in.huawei.com ([119.145.14.66]:2252 "EHLO szxga03-in.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932302AbcAZDMe (ORCPT ); Mon, 25 Jan 2016 22:12:34 -0500 Subject: Re: [PATCH v7 4/6] ARM: debug: add hi3519 debug uart To: , , , , , , , , , , , , , , , References: <1453690883-31220-1-git-send-email-xuejiancheng@huawei.com> <1453690883-31220-5-git-send-email-xuejiancheng@huawei.com> CC: , , , , , , , , , , , , From: xuejiancheng Message-ID: <56A6E2D5.7040104@huawei.com> Date: Tue, 26 Jan 2016 11:07:01 +0800 MIME-Version: 1.0 In-Reply-To: <1453690883-31220-5-git-send-email-xuejiancheng@huawei.com> Content-Type: text/plain; charset="windows-1252" Sender: linux-clk-owner@vger.kernel.org List-ID: On 2016/1/25 11:01, Jiancheng Xue wrote: > add hi3519 debug uart > > Signed-off-by: Jiancheng Xue > --- > arch/arm/Kconfig.debug | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug > index c6b6175..b02a7c1 100644 > --- a/arch/arm/Kconfig.debug > +++ b/arch/arm/Kconfig.debug > @@ -260,6 +260,14 @@ choice > Say Y here if you want kernel low-level debugging support > on Cortina Gemini based platforms. > > + config DEBUG_HI3519_UART > + bool "Hisilicon HI3519 Debug UART" > + depends on ARCH_HISI > + select DEBUG_UART_PL01X > + help > + Say Y here if you want kernel low-level debugging support > + on HI3519 UART. > + > config DEBUG_HI3620_UART > bool "Hisilicon HI3620 Debug UART" > depends on ARCH_HI3xxx > @@ -1451,6 +1459,7 @@ config DEBUG_UART_PHYS > default 0x11002000 if DEBUG_MT8127_UART0 > default 0x11006000 if DEBUG_MT6589_UART0 > default 0x11009000 if DEBUG_MT8135_UART3 > + default 0x12100000 if DEBUG_HI3519_UART > default 0x16000000 if DEBUG_INTEGRATOR > default 0x18000300 if DEBUG_BCM_5301X > default 0x18010000 if DEBUG_SIRFATLAS7_UART0 > @@ -1514,6 +1523,7 @@ config DEBUG_UART_PHYS > default 0xfcb00000 if DEBUG_HI3620_UART > default 0xfd883000 if DEBUG_ALPINE_UART0 > default 0xfe800000 if ARCH_IOP32X > + default 0xfef00000 if DEBUG_HI3519_UART Sorry. This line is put in a wrong place by my mistake. I'll correct it in next version. > default 0xff690000 if DEBUG_RK32_UART2 > default 0xffc02000 if DEBUG_SOCFPGA_UART0 > default 0xffc02100 if DEBUG_SOCFPGA_UART1 >