From: Jongsung Kim <neidhard.kim@lge.com>
To: Maxime Ripard <maxime.ripard@free-electrons.com>,
Mike Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>
Cc: Chen-Yu Tsai <wens@csie.org>,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org
Subject: Re: [PATCH 1/2] clk: fixed-factor: Allow for a few clocks to change the parent rate
Date: Fri, 24 Jun 2016 13:43:52 +0900 [thread overview]
Message-ID: <576CBA88.2060502@lge.com> (raw)
In-Reply-To: <20160622091555.18415-1-maxime.ripard@free-electrons.com>
Hi Maxime,
We need a path to set CLK_SET_RATE_PARENT any other needed flags when a fixed-factor-clock is initialized by DT. It seems your way will work also for my case. However, I suggested some more generic approach:
https://lkml.org/lkml/2016/6/24/3
Please leave any comments.
On 2016년 06월 22일 18:15, Maxime Ripard wrote:
> The only way for a fixed factor clock to change its rate would be to change
> its parent rate.
>
> Since passing blindly CLK_SET_RATE_PARENT might break a lot of platforms
> that were relying on the fact that the parent rate wouldn't change,
> introduce a compatible-based whitelist that will allow clocks to opt-in
> that flag.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
> ---
> .../devicetree/bindings/clock/fixed-factor-clock.txt | 4 ++++
> drivers/clk/clk-fixed-factor.c | 11 ++++++++++-
> 2 files changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
> index 1bae8527eb9b..189467a7188a 100644
> --- a/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
> +++ b/Documentation/devicetree/bindings/clock/fixed-factor-clock.txt
> @@ -14,6 +14,10 @@ Required properties:
> Optional properties:
> - clock-output-names : From common clock binding.
>
> +Some clocks that require special treatments are also handled by that
> +driver, with the compatibles:
> + - allwinner,sun4i-a10-pll3-2x-clk
> +
> Example:
> clock {
> compatible = "fixed-factor-clock";
> diff --git a/drivers/clk/clk-fixed-factor.c b/drivers/clk/clk-fixed-factor.c
> index 75cd6c792cb8..4db3be214077 100644
> --- a/drivers/clk/clk-fixed-factor.c
> +++ b/drivers/clk/clk-fixed-factor.c
> @@ -142,6 +142,11 @@ void clk_hw_unregister_fixed_factor(struct clk_hw *hw)
> EXPORT_SYMBOL_GPL(clk_hw_unregister_fixed_factor);
>
> #ifdef CONFIG_OF
> +static const struct of_device_id set_rate_parent_matches[] = {
> + { .compatible = "allwinner,sun4i-a10-pll3-2x-clk" },
> + { /* Sentinel */ },
> +};
> +
> /**
> * of_fixed_factor_clk_setup() - Setup function for simple fixed factor clock
> */
> @@ -150,6 +155,7 @@ void __init of_fixed_factor_clk_setup(struct device_node *node)
> struct clk *clk;
> const char *clk_name = node->name;
> const char *parent_name;
> + unsigned long flags = 0;
> u32 div, mult;
>
> if (of_property_read_u32(node, "clock-div", &div)) {
> @@ -167,7 +173,10 @@ void __init of_fixed_factor_clk_setup(struct device_node *node)
> of_property_read_string(node, "clock-output-names", &clk_name);
> parent_name = of_clk_get_parent_name(node, 0);
>
> - clk = clk_register_fixed_factor(NULL, clk_name, parent_name, 0,
> + if (of_match_node(set_rate_parent_matches, node))
> + flags |= CLK_SET_RATE_PARENT;
> +
> + clk = clk_register_fixed_factor(NULL, clk_name, parent_name, flags,
> mult, div);
> if (!IS_ERR(clk))
> of_clk_add_provider(node, of_clk_src_simple_get, clk);
next prev parent reply other threads:[~2016-06-24 4:43 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-06-22 9:15 [PATCH 1/2] clk: fixed-factor: Allow for a few clocks to change the parent rate Maxime Ripard
2016-06-22 9:15 ` [PATCH 2/2] ARM: sun5i: Allow PLL3 2x fixed factor clock to change PLL3 rate Maxime Ripard
2016-06-24 4:43 ` Jongsung Kim [this message]
2016-06-24 15:52 ` [PATCH 1/2] clk: fixed-factor: Allow for a few clocks to change the parent rate Rob Herring
2016-07-02 0:17 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=576CBA88.2060502@lge.com \
--to=neidhard.kim@lge.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=maxime.ripard@free-electrons.com \
--cc=mturquette@baylibre.com \
--cc=sboyd@codeaurora.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).