[PATCH 6/8] arm64: dts: qcom: sm8350: finish reordering nodes

Dmitry Baryshkov
2023-02-06T00:27:57Z

Finish reordering DT nodes. Move PDC, tsens, AOSS, SRAM, SPMI and TLMM
nodes to the proper position.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/sm8350.dtsi | 764 +++++++++++++--------------
1 file changed, 382 insertions(+), 382 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index c327dc925793..e5b308957f88 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1884,276 +1884,6 @@ compute-cb@3 {
};
};

- pdc: interrupt-controller@b220000 {
- compatible = "qcom,sm8350-pdc", "qcom,pdc";
- reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
- qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
- <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
- <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
- <156 716 12>;
- #interrupt-cells = <2>;
- interrupt-parent = <&intc>;
- interrupt-controller;
- };
-
- tsens0: thermal-sensor@c263000 {
- compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
- reg = <0 0x0c263000 0 0x1ff>, /* TM */
- <0 0x0c222000 0 0x8>; /* SROT */
- #qcom,sensors = <15>;
- interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- tsens1: thermal-sensor@c265000 {
- compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
- reg = <0 0x0c265000 0 0x1ff>, /* TM */
- <0 0x0c223000 0 0x8>; /* SROT */
- #qcom,sensors = <14>;
- interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
- <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "uplow", "critical";
- #thermal-sensor-cells = <1>;
- };
-
- aoss_qmp: power-management@c300000 {
- compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
- reg = <0 0x0c300000 0 0x400>;
- interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
- IRQ_TYPE_EDGE_RISING>;
- mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
-
- #clock-cells = <0>;
- };
-
- sram@c3f0000 {
- compatible = "qcom,rpmh-stats";
- reg = <0 0x0c3f0000 0 0x400>;
- };
-
- spmi_bus: spmi@c440000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0 0x0c440000 0x0 0x1100>,
- <0x0 0x0c600000 0x0 0x2000000>,
- <0x0 0x0e600000 0x0 0x100000>,
- <0x0 0x0e700000 0x0 0xa0000>,
- <0x0 0x0c40a000 0x0 0x26000>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
-
- tlmm: pinctrl@f100000 {
- compatible = "qcom,sm8350-tlmm";
- reg = <0 0x0f100000 0 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&tlmm 0 0 204>;
- wakeup-parent = <&pdc>;
-
- sdc2_default_state: sdc2-default-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <16>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- drive-strength = <16>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "sdc2_data";
- drive-strength = <16>;
- bias-pull-up;
- };
- };
-
- sdc2_sleep_state: sdc2-sleep-state {
- clk-pins {
- pins = "sdc2_clk";
- drive-strength = <2>;
- bias-disable;
- };
-
- cmd-pins {
- pins = "sdc2_cmd";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- data-pins {
- pins = "sdc2_data";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- qup_uart3_default_state: qup-uart3-default-state {
- rx-pins {
- pins = "gpio18";
- function = "qup3";
- };
- tx-pins {
- pins = "gpio19";
- function = "qup3";
- };
- };
-
- qup_uart6_default: qup-uart6-default-state {
- pins = "gpio30", "gpio31";
- function = "qup6";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_uart18_default: qup-uart18-default-state {
- pins = "gpio58", "gpio59";
- function = "qup18";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c0_default: qup-i2c0-default-state {
- pins = "gpio4", "gpio5";
- function = "qup0";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c1_default: qup-i2c1-default-state {
- pins = "gpio8", "gpio9";
- function = "qup1";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c2_default: qup-i2c2-default-state {
- pins = "gpio12", "gpio13";
- function = "qup2";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c4_default: qup-i2c4-default-state {
- pins = "gpio20", "gpio21";
- function = "qup4";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c5_default: qup-i2c5-default-state {
- pins = "gpio24", "gpio25";
- function = "qup5";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c6_default: qup-i2c6-default-state {
- pins = "gpio28", "gpio29";
- function = "qup6";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c7_default: qup-i2c7-default-state {
- pins = "gpio32", "gpio33";
- function = "qup7";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c8_default: qup-i2c8-default-state {
- pins = "gpio36", "gpio37";
- function = "qup8";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c9_default: qup-i2c9-default-state {
- pins = "gpio40", "gpio41";
- function = "qup9";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c10_default: qup-i2c10-default-state {
- pins = "gpio44", "gpio45";
- function = "qup10";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c11_default: qup-i2c11-default-state {
- pins = "gpio48", "gpio49";
- function = "qup11";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c12_default: qup-i2c12-default-state {
- pins = "gpio52", "gpio53";
- function = "qup12";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c13_default: qup-i2c13-default-state {
- pins = "gpio0", "gpio1";
- function = "qup13";
- drive-strength = <2>;
- bias-pull-up;
- };
-
- qup_i2c14_default: qup-i2c14-default-state {
- pins = "gpio56", "gpio57";
- function = "qup14";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c15_default: qup-i2c15-default-state {
- pins = "gpio60", "gpio61";
- function = "qup15";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c16_default: qup-i2c16-default-state {
- pins = "gpio64", "gpio65";
- function = "qup16";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c17_default: qup-i2c17-default-state {
- pins = "gpio72", "gpio73";
- function = "qup17";
- drive-strength = <2>;
- bias-disable;
- };
-
- qup_i2c19_default: qup-i2c19-default-state {
- pins = "gpio76", "gpio77";
- function = "qup19";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
sdhc_2: mmc@8804000 {
compatible = "qcom,sm8350-sdhci", "qcom,sdhci-msm-v5";
reg = <0 0x08804000 0 0x1000>;
@@ -2593,144 +2323,414 @@ mdss_dsi0_out: endpoint {
};
};

- mdss_dsi0_phy: phy@ae94400 {
- compatible = "qcom,sm8350-dsi-phy-5nm";
- reg = <0 0x0ae94400 0 0x200>,
- <0 0x0ae94600 0 0x280>,
- <0 0x0ae94900 0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
-
- #clock-cells = <1>;
- #phy-cells = <0>;
+ mdss_dsi0_phy: phy@ae94400 {
+ compatible = "qcom,sm8350-dsi-phy-5nm";
+ reg = <0 0x0ae94400 0 0x200>,
+ <0 0x0ae94600 0 0x280>,
+ <0 0x0ae94900 0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+
+ mdss_dsi1: dsi@ae96000 {
+ compatible = "qcom,mdss-dsi-ctrl";
+ reg = <0 0x0ae96000 0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupt-parent = <&mdss>;
+ interrupts = <5>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC1_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>,
+ <&mdss_dsi1_phy 1>;
+
+ operating-points-v2 = <&dsi1_opp_table>;
+ power-domains = <&rpmhpd SM8350_MMCX>;
+
+ phys = <&mdss_dsi1_phy>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ dsi1_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ /* TODO: opp-187500000 should work with
+ * &rpmhpd_opp_low_svs, but one some of
+ * sm8350_hdk boards reboot using this
+ * opp.
+ */
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdss_dsi1_in: endpoint {
+ remote-endpoint = <&dpu_intf2_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ mdss_dsi1_out: endpoint {
+ };
+ };
+ };
+ };
+
+ mdss_dsi1_phy: phy@ae96400 {
+ compatible = "qcom,sm8350-dsi-phy-5nm";
+ reg = <0 0x0ae96400 0 0x200>,
+ <0 0x0ae96600 0 0x280>,
+ <0 0x0ae96900 0 0x27c>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface", "ref";
+
+ status = "disabled";
+ };
+ };
+
+ dispcc: clock-controller@af00000 {
+ compatible = "qcom,sm8350-dispcc";
+ reg = <0 0x0af00000 0 0x10000>;
+ clocks = <&rpmhcc RPMH_CXO_CLK>,
+ <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
+ <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
+ <0>,
+ <0>;
+ clock-names = "bi_tcxo",
+ "dsi0_phy_pll_out_byteclk",
+ "dsi0_phy_pll_out_dsiclk",
+ "dsi1_phy_pll_out_byteclk",
+ "dsi1_phy_pll_out_dsiclk",
+ "dp_phy_pll_link_clk",
+ "dp_phy_pll_vco_div_clk";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+
+ power-domains = <&rpmhpd SM8350_MMCX>;
+ };
+
+ pdc: interrupt-controller@b220000 {
+ compatible = "qcom,sm8350-pdc", "qcom,pdc";
+ reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
+ qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
+ <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
+ <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
+ <156 716 12>;
+ #interrupt-cells = <2>;
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ };
+
+ tsens0: thermal-sensor@c263000 {
+ compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c263000 0 0x1ff>, /* TM */
+ <0 0x0c222000 0 0x8>; /* SROT */
+ #qcom,sensors = <15>;
+ interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c265000 {
+ compatible = "qcom,sm8350-tsens", "qcom,tsens-v2";
+ reg = <0 0x0c265000 0 0x1ff>, /* TM */
+ <0 0x0c223000 0 0x8>; /* SROT */
+ #qcom,sensors = <14>;
+ interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+ <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow", "critical";
+ #thermal-sensor-cells = <1>;
+ };
+
+ aoss_qmp: power-management@c300000 {
+ compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
+ reg = <0 0x0c300000 0 0x400>;
+ interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+ IRQ_TYPE_EDGE_RISING>;
+ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+ #clock-cells = <0>;
+ };
+
+ sram@c3f0000 {
+ compatible = "qcom,rpmh-stats";
+ reg = <0 0x0c3f0000 0 0x400>;
+ };
+
+ spmi_bus: spmi@c440000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0 0x0c440000 0x0 0x1100>,
+ <0x0 0x0c600000 0x0 0x2000000>,
+ <0x0 0x0e600000 0x0 0x100000>,
+ <0x0 0x0e700000 0x0 0xa0000>,
+ <0x0 0x0c40a000 0x0 0x26000>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
+ tlmm: pinctrl@f100000 {
+ compatible = "qcom,sm8350-tlmm";
+ reg = <0 0x0f100000 0 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 204>;
+ wakeup-parent = <&pdc>;
+
+ sdc2_default_state: sdc2-default-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+ };
+
+ sdc2_sleep_state: sdc2-sleep-state {
+ clk-pins {
+ pins = "sdc2_clk";
+ drive-strength = <2>;
+ bias-disable;
+ };

- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
+ cmd-pins {
+ pins = "sdc2_cmd";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- status = "disabled";
+ data-pins {
+ pins = "sdc2_data";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
};

- mdss_dsi1: dsi@ae96000 {
- compatible = "qcom,mdss-dsi-ctrl";
- reg = <0 0x0ae96000 0 0x400>;
- reg-names = "dsi_ctrl";
+ qup_uart3_default_state: qup-uart3-default-state {
+ rx-pins {
+ pins = "gpio18";
+ function = "qup3";
+ };
+ tx-pins {
+ pins = "gpio19";
+ function = "qup3";
+ };
+ };

- interrupt-parent = <&mdss>;
- interrupts = <5>;
+ qup_uart6_default: qup-uart6-default-state {
+ pins = "gpio30", "gpio31";
+ function = "qup6";
+ drive-strength = <2>;
+ bias-disable;
+ };

- clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK>,
- <&dispcc DISP_CC_MDSS_BYTE1_INTF_CLK>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK>,
- <&dispcc DISP_CC_MDSS_ESC1_CLK>,
- <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&gcc GCC_DISP_HF_AXI_CLK>;
- clock-names = "byte",
- "byte_intf",
- "pixel",
- "core",
- "iface",
- "bus";
+ qup_uart18_default: qup-uart18-default-state {
+ pins = "gpio58", "gpio59";
+ function = "qup18";
+ drive-strength = <2>;
+ bias-disable;
+ };

- assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
- <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
- assigned-clock-parents = <&mdss_dsi1_phy 0>,
- <&mdss_dsi1_phy 1>;
+ qup_i2c0_default: qup-i2c0-default-state {
+ pins = "gpio4", "gpio5";
+ function = "qup0";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- operating-points-v2 = <&dsi1_opp_table>;
- power-domains = <&rpmhpd SM8350_MMCX>;
+ qup_i2c1_default: qup-i2c1-default-state {
+ pins = "gpio8", "gpio9";
+ function = "qup1";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- phys = <&mdss_dsi1_phy>;
+ qup_i2c2_default: qup-i2c2-default-state {
+ pins = "gpio12", "gpio13";
+ function = "qup2";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- #address-cells = <1>;
- #size-cells = <0>;
+ qup_i2c4_default: qup-i2c4-default-state {
+ pins = "gpio20", "gpio21";
+ function = "qup4";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- status = "disabled";
+ qup_i2c5_default: qup-i2c5-default-state {
+ pins = "gpio24", "gpio25";
+ function = "qup5";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- dsi1_opp_table: opp-table {
- compatible = "operating-points-v2";
+ qup_i2c6_default: qup-i2c6-default-state {
+ pins = "gpio28", "gpio29";
+ function = "qup6";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- /* TODO: opp-187500000 should work with
- * &rpmhpd_opp_low_svs, but one some of
- * sm8350_hdk boards reboot using this
- * opp.
- */
- opp-187500000 {
- opp-hz = /bits/ 64 <187500000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
+ qup_i2c7_default: qup-i2c7-default-state {
+ pins = "gpio32", "gpio33";
+ function = "qup7";
+ drive-strength = <2>;
+ bias-disable;
+ };

- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- required-opps = <&rpmhpd_opp_svs>;
- };
+ qup_i2c8_default: qup-i2c8-default-state {
+ pins = "gpio36", "gpio37";
+ function = "qup8";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- opp-358000000 {
- opp-hz = /bits/ 64 <358000000>;
- required-opps = <&rpmhpd_opp_svs_l1>;
- };
- };
+ qup_i2c9_default: qup-i2c9-default-state {
+ pins = "gpio40", "gpio41";
+ function = "qup9";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ qup_i2c10_default: qup-i2c10-default-state {
+ pins = "gpio44", "gpio45";
+ function = "qup10";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- port@0 {
- reg = <0>;
- mdss_dsi1_in: endpoint {
- remote-endpoint = <&dpu_intf2_out>;
- };
- };
+ qup_i2c11_default: qup-i2c11-default-state {
+ pins = "gpio48", "gpio49";
+ function = "qup11";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- port@1 {
- reg = <1>;
- mdss_dsi1_out: endpoint {
- };
- };
- };
+ qup_i2c12_default: qup-i2c12-default-state {
+ pins = "gpio52", "gpio53";
+ function = "qup12";
+ drive-strength = <2>;
+ bias-pull-up;
};

- mdss_dsi1_phy: phy@ae96400 {
- compatible = "qcom,sm8350-dsi-phy-5nm";
- reg = <0 0x0ae96400 0 0x200>,
- <0 0x0ae96600 0 0x280>,
- <0 0x0ae96900 0 0x27c>;
- reg-names = "dsi_phy",
- "dsi_phy_lane",
- "dsi_pll";
+ qup_i2c13_default: qup-i2c13-default-state {
+ pins = "gpio0", "gpio1";
+ function = "qup13";
+ drive-strength = <2>;
+ bias-pull-up;
+ };

- #clock-cells = <1>;
- #phy-cells = <0>;
+ qup_i2c14_default: qup-i2c14-default-state {
+ pins = "gpio56", "gpio57";
+ function = "qup14";
+ drive-strength = <2>;
+ bias-disable;
+ };

- clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
- <&rpmhcc RPMH_CXO_CLK>;
- clock-names = "iface", "ref";
+ qup_i2c15_default: qup-i2c15-default-state {
+ pins = "gpio60", "gpio61";
+ function = "qup15";
+ drive-strength = <2>;
+ bias-disable;
+ };

- status = "disabled";
+ qup_i2c16_default: qup-i2c16-default-state {
+ pins = "gpio64", "gpio65";
+ function = "qup16";
+ drive-strength = <2>;
+ bias-disable;
};
- };

- dispcc: clock-controller@af00000 {
- compatible = "qcom,sm8350-dispcc";
- reg = <0 0x0af00000 0 0x10000>;
- clocks = <&rpmhcc RPMH_CXO_CLK>,
- <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>,
- <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>,
- <0>,
- <0>;
- clock-names = "bi_tcxo",
- "dsi0_phy_pll_out_byteclk",
- "dsi0_phy_pll_out_dsiclk",
- "dsi1_phy_pll_out_byteclk",
- "dsi1_phy_pll_out_dsiclk",
- "dp_phy_pll_link_clk",
- "dp_phy_pll_vco_div_clk";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
+ qup_i2c17_default: qup-i2c17-default-state {
+ pins = "gpio72", "gpio73";
+ function = "qup17";
+ drive-strength = <2>;
+ bias-disable;
+ };

- power-domains = <&rpmhpd SM8350_MMCX>;
+ qup_i2c19_default: qup-i2c19-default-state {
+ pins = "gpio76", "gpio77";
+ function = "qup19";
+ drive-strength = <2>;
+ bias-disable;
+ };
};

apps_smmu: iommu@15000000 {
--
2.39.1