Re: [PATCH 1/8] clk: vc5: Prevent division by zero on unconfigured outputs

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Marek,

Thank you for the patches.

On Thursday 29 Jun 2017 12:18:44 Marek Vasut wrote:
> From: Marek Vasut <marek.vasut+renesas@gmail.com>
> 
> In case the initial values of the FOD registers are not configured in
> the OTP or by the bootloader, it is possible that the FOD registers
> will contain zeroes. The code in vc5_fod_recalc_rate() immediately
> feeds the FOD divider value obtained from the FOD registers into the
> div64_u64() and if the FOD divider value is zero, triggers division
> by zero exception.
> 
> Check if the FOD divider value is zero and return the frequency of
> the FOD output as 0 Hz if it is so. This prevents the division by
> zero exception.
> 
> Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Cc: Alexey Firago <alexey_firago@mentor.com>
> Cc: Michael Turquette <mturquette@baylibre.com>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: linux-renesas-soc@vger.kernel.org

For the whole series,

Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

on Salvator-XS with the display LVDS output.

> ---
>  drivers/clk/clk-versaclock5.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/clk/clk-versaclock5.c b/drivers/clk/clk-versaclock5.c
> index ea7d552a2f2b..60bf4afb51bd 100644
> --- a/drivers/clk/clk-versaclock5.c
> +++ b/drivers/clk/clk-versaclock5.c
> @@ -426,6 +426,10 @@ static unsigned long vc5_fod_recalc_rate(struct clk_hw
> *hw, div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) |
>  		  (od_frc[2] << 6) | (od_frc[3] >> 2);
> 
> +	/* Avoid division by zero if the output is not configured. */
> +	if ((div_int == 0) && (div_frc == 0))
> +		return 0;
> +
>  	/* The PLL divider has 12 integer bits and 30 fractional bits */
>  	return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + 
div_frc);
>  }

-- 
Regards,

Laurent Pinchart