From: Hans de Goede <hdegoede@redhat.com>
To: Daniel Scally <djrscally@gmail.com>,
linux-acpi@vger.kernel.org, linux-clk@vger.kernel.org,
platform-driver-x86@vger.kernel.org
Cc: rafael@kernel.org, lenb@kernel.org, mturquette@baylibre.com,
sboyd@kernel.org, markgross@kernel.org, robert.moore@intel.com
Subject: Re: [PATCH 6/6] platform/x86: int3472: Add board data for Surface Go2 IR camera
Date: Mon, 21 Feb 2022 11:05:40 +0100 [thread overview]
Message-ID: <9aae2f06-1f3d-2dca-95c3-77f399e7b199@redhat.com> (raw)
In-Reply-To: <20220216225304.53911-7-djrscally@gmail.com>
Hi,
On 2/16/22 23:53, Daniel Scally wrote:
> Add the board data describing the regulators for the Microsoft
> Surface Go line's IR camera.
>
> Signed-off-by: Daniel Scally <djrscally@gmail.com>
Thanks, patch looks good to me:
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Regards,
Hans
> ---
> .../x86/intel/int3472/tps68470_board_data.c | 33 +++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
> diff --git a/drivers/platform/x86/intel/int3472/tps68470_board_data.c b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> index 442a8a2de224..49a3591c6d85 100644
> --- a/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> +++ b/drivers/platform/x86/intel/int3472/tps68470_board_data.c
> @@ -30,6 +30,15 @@ static struct regulator_consumer_supply int347a_vcm_consumer_supplies[] = {
> static struct regulator_consumer_supply int347a_vsio_consumer_supplies[] = {
> REGULATOR_SUPPLY("dovdd", "i2c-INT347A:00"),
> REGULATOR_SUPPLY("vsio", "i2c-INT347A:00-VCM"),
> + REGULATOR_SUPPLY("vddd", "i2c-INT347E:00"),
> +};
> +
> +static struct regulator_consumer_supply int347a_aux1_consumer_supplies[] = {
> + REGULATOR_SUPPLY("vdda", "i2c-INT347E:00"),
> +};
> +
> +static struct regulator_consumer_supply int347a_aux2_consumer_supplies[] = {
> + REGULATOR_SUPPLY("vdddo", "i2c-INT347E:00"),
> };
>
> static const struct regulator_init_data surface_go_tps68470_core_reg_init_data = {
> @@ -86,6 +95,28 @@ static const struct regulator_init_data surface_go_tps68470_vsio_reg_init_data =
> .consumer_supplies = int347a_vsio_consumer_supplies,
> };
>
> +static const struct regulator_init_data surface_go_tps68470_aux1_reg_init_data = {
> + .constraints = {
> + .min_uV = 2815200,
> + .max_uV = 2815200,
> + .apply_uV = 1,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(int347a_aux1_consumer_supplies),
> + .consumer_supplies = int347a_aux1_consumer_supplies,
> +};
> +
> +static const struct regulator_init_data surface_go_tps68470_aux2_reg_init_data = {
> + .constraints = {
> + .min_uV = 1800600,
> + .max_uV = 1800600,
> + .apply_uV = 1,
> + .valid_ops_mask = REGULATOR_CHANGE_STATUS,
> + },
> + .num_consumer_supplies = ARRAY_SIZE(int347a_aux2_consumer_supplies),
> + .consumer_supplies = int347a_aux2_consumer_supplies,
> +};
> +
> static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata = {
> .reg_init_data = {
> [TPS68470_CORE] = &surface_go_tps68470_core_reg_init_data,
> @@ -93,6 +124,8 @@ static const struct tps68470_regulator_platform_data surface_go_tps68470_pdata =
> [TPS68470_VCM] = &surface_go_tps68470_vcm_reg_init_data,
> [TPS68470_VIO] = &surface_go_tps68470_vio_reg_init_data,
> [TPS68470_VSIO] = &surface_go_tps68470_vsio_reg_init_data,
> + [TPS68470_AUX1] = &surface_go_tps68470_aux1_reg_init_data,
> + [TPS68470_AUX2] = &surface_go_tps68470_aux2_reg_init_data,
> },
> };
>
next prev parent reply other threads:[~2022-02-21 10:45 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-16 22:52 [PATCH 0/6] Add multiple-consumer support to int3472-tps68470 driver Daniel Scally
2022-02-16 22:52 ` [PATCH 1/6] ACPI: scan: Add acpi_dev_get_next_consumer_dev() Daniel Scally
2022-02-21 9:50 ` Hans de Goede
2022-02-21 9:51 ` Hans de Goede
2022-02-16 22:53 ` [PATCH 2/6] ACPI: bus: Add iterator for dependent devices Daniel Scally
2022-02-21 9:52 ` Hans de Goede
2022-02-16 22:53 ` [PATCH 3/6] platform/x86: int3472: Support multiple clock consumers Daniel Scally
2022-02-17 3:22 ` kernel test robot
2022-02-22 14:44 ` Hans de Goede
2022-02-22 14:47 ` Daniel Scally
2022-02-21 9:59 ` Hans de Goede
2022-02-25 0:49 ` Stephen Boyd
2022-02-25 9:22 ` Hans de Goede
2022-02-16 22:53 ` [PATCH 4/6] platform/x86: int3472: Add terminator to gpiod_lookup_table Daniel Scally
2022-02-21 10:00 ` Hans de Goede
2022-02-21 13:46 ` Hans de Goede
2022-02-16 22:53 ` [PATCH 5/6] platform/x86: int3472: Support multiple gpio lookups in board data Daniel Scally
2022-02-21 10:03 ` Hans de Goede
2022-02-16 22:53 ` [PATCH 6/6] platform/x86: int3472: Add board data for Surface Go2 IR camera Daniel Scally
2022-02-21 10:05 ` Hans de Goede [this message]
2022-02-17 9:55 ` [PATCH 0/6] Add multiple-consumer support to int3472-tps68470 driver Hans de Goede
2022-02-18 8:45 ` Daniel Scally
2022-02-21 10:07 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9aae2f06-1f3d-2dca-95c3-77f399e7b199@redhat.com \
--to=hdegoede@redhat.com \
--cc=djrscally@gmail.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=markgross@kernel.org \
--cc=mturquette@baylibre.com \
--cc=platform-driver-x86@vger.kernel.org \
--cc=rafael@kernel.org \
--cc=robert.moore@intel.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox