Re: [PATCH v2 4/4] arm64: dts: qcom: sm6350: Add video clock controller

[Jagadeesh Kona <quic_jkona@quicinc.com>]

On 4/1/2025 10:03 PM, Konrad Dybcio wrote:
> On 3/24/25 9:41 AM, Luca Weiss wrote:
>> Add a node for the videocc found on the SM6350 SoC.
>>
>> Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
>> ---
>>  arch/arm64/boot/dts/qcom/sm6350.dtsi | 14 ++++++++++++++
>>  1 file changed, 14 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> index 42f9d16c2fa6da66a8bb524a33c2687a1e4b40e0..4498d6dfd61a7e30a050a8654d54dae2d06c220c 100644
>> --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
>> @@ -1952,6 +1952,20 @@ usb_1_dwc3_ss_out: endpoint {
>>  			};
>>  		};
>>  
>> +		videocc: clock-controller@aaf0000 {
>> +			compatible = "qcom,sm6350-videocc";
>> +			reg = <0x0 0x0aaf0000 0x0 0x10000>;
>> +			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
>> +				 <&rpmhcc RPMH_CXO_CLK>,
>> +				 <&sleep_clk>;
>> +			clock-names = "iface",
>> +				      "bi_tcxo",
>> +				      "sleep_clk";
>> +			#clock-cells = <1>;
>> +			#reset-cells = <1>;
>> +			#power-domain-cells = <1>;
>> +		};
> 
> You'll probably want to hook up some additional power domains here, see
> 
> https://lore.kernel.org/linux-arm-msm/20250327-videocc-pll-multi-pd-voting-v3-0-895fafd62627@quicinc.com/
> 

On SM6350, videocc doesn't need multiple power domains at HW level, it is only on CX rail which would be ON
when system is active, hence power-domains are not mandatory here.

Thanks,
Jagadeesh 

> Konrad
>