messages from 2024-10-24 20:39:46 to 2024-10-28 14:21:55 UTC [more...]
[PATCH v3 00/12] Add support for RaspberryPi RP1 PCI device using a DT overlay
2024-10-28 14:21 UTC (14+ messages)
` [PATCH v3 01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings
` [PATCH v3 02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings
` [PATCH v3 03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs
` [PATCH v3 04/12] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1
` [PATCH v3 05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes
` [PATCH v3 06/12] of: address: Preserve the flags portion on 1:1 dma-ranges mapping
` [PATCH v3 07/12] clk: rp1: Add support for clocks provided by RP1
` [PATCH v3 08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
` [PATCH v3 09/12] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
` [PATCH v3 10/12] misc: rp1: RaspberryPi RP1 misc driver
` [PATCH v3 11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5
` [PATCH v3 12/12] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
[PATCH v5 0/4] Add CMN PLL clock controller driver for IPQ9574
2024-10-28 14:04 UTC (5+ messages)
` [PATCH v5 1/4] dt-bindings: clock: qcom: Add CMN PLL clock controller for IPQ SoC
` [PATCH v5 2/4] clk: qcom: Add CMN PLL clock controller driver "
` [PATCH v5 3/4] arm64: defconfig: Enable Qualcomm IPQ CMN PLL clock controller
` [PATCH v5 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
[PATCH 0/2] clk: clk-axi-clkgen: make sure to enable the AXI bus clock
2024-10-28 14:01 UTC (8+ messages)
` [PATCH 1/2] dt-bindings: clock: axi-clkgen: include AXI clk
[PATCH 0/5] clk: qcom: remove superfluous alpha settings from PLL configs
2024-10-28 11:50 UTC (17+ messages)
` [PATCH 1/5] clk: qcom: apss-ipq-pll: drop 'alpha_en_mask' from IPQ5018 PLL config
` [PATCH 2/5] clk: qcom: apps-ipq-pll: drop 'alpha_en_mask' from IPQ5332 "
` [PATCH 3/5] clk: qcom: gcc-ipq6018: remove alpha values from NSS Crypto PLL's config
` [PATCH 4/5] clk: qcom: dispcc-qcm2290: remove alpha values from disp_cc_pll0_config
` [PATCH 5/5] clk: qcom: dispcc-sm6115: "
[PATCH v2 00/14] Add support for RaspberryPi RP1 PCI device using a DT overlay
2024-10-28 10:36 UTC (24+ messages)
` [PATCH v2 08/14] clk: rp1: Add support for clocks provided by RP1
` [PATCH v2 09/14] pinctrl: rp1: Implement RaspberryPi RP1 gpio support
` [PATCH v2 10/14] arm64: dts: rp1: Add support for RaspberryPi's RP1 device
` [PATCH v2 11/14] misc: rp1: RaspberryPi RP1 misc driver
` [PATCH v2 14/14] arm64: defconfig: Enable RP1 misc/clock/gpio drivers
[PATCH 0/6] Support spread spectrum clocking for i.MX8{M,N,P} PLLs
2024-10-28 10:32 UTC (15+ messages)
` [PATCH 1/6] dt-bindings: clock: imx8m-anatop: support spread spectrum clocking
[PATCH v5 0/5] arm: dts: qcom-ipq5018-linksys-jamaica: Include dts from arm64
2024-10-28 10:24 UTC (6+ messages)
` [PATCH v5 5/5] "
[PATCH v8 0/7] Add NSS clock controller support for IPQ9574
2024-10-28 7:45 UTC (15+ messages)
` [PATCH v8 1/7] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
` [PATCH v8 2/7] dt-bindings: clock: gcc-ipq9574: Add definition for GPLL0_OUT_AUX
` [PATCH v8 3/7] clk: qcom: gcc-ipq9574: Add support for gpll0_out_aux clock
` [PATCH v8 4/7] dt-bindings: clock: Add ipq9574 NSSCC clock and reset definitions
` [PATCH v8 5/7] clk: qcom: Add NSS clock Controller driver for IPQ9574
` [PATCH v8 6/7] arm64: dts: qcom: ipq9574: Add nsscc node
` [PATCH v8 7/7] arm64: defconfig: Build NSS Clock Controller driver for IPQ9574
[PATCH V5 0/6] Add minimal boot support for IPQ5424
2024-10-28 7:29 UTC (8+ messages)
` [PATCH V5 1/6] clk: qcom: clk-alpha-pll: Add NSS HUAYRA ALPHA PLL support for ipq9574
` [PATCH V5 2/6] dt-bindings: clock: Add Qualcomm IPQ5424 GCC binding
` [PATCH V5 3/6] clk: qcom: add Global Clock controller (GCC) driver for IPQ5424 SoC
` [PATCH V5 4/6] dt-bindings: qcom: Add ipq5424 boards
` [PATCH V5 5/6] arm64: dts: qcom: add IPQ5424 SoC and rdp466 board support
` [PATCH V5 6/6] arm64: defconfig: Enable IPQ5424 RDP466 base configs
[PATCH v2 0/6] Add support for GPUCC, CAMCC and VIDEOCC on Qualcomm QCS8300 platform
2024-10-28 7:05 UTC (7+ messages)
` [PATCH v2 1/6] dt-bindings: clock: qcom: Add GPU clocks for QCS8300
` [PATCH v2 5/6] dt-bindings: clock: qcom: Add QCS8300 video clock controller
[PATCH v7 0/3] [PATCH v6 0/3] Add support for AST2700 clk driver
2024-10-28 5:30 UTC (4+ messages)
` [PATCH v7 1/3] dt-bindings: mfd: aspeed: support for AST2700
` [PATCH v7 2/3] reset: aspeed: register AST2700 reset auxiliary bus device
` [PATCH v7 3/3] clk: aspeed: add AST2700 clock driver
[PATCH v5 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
2024-10-28 4:21 UTC (13+ messages)
` [PATCH v5 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
` [PATCH v5 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
` [PATCH v5 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
` [PATCH v5 04/11] dt-bindings: clock: qcom,sm8550-dispcc: "
` [PATCH v5 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
` [PATCH v5 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
` [PATCH v5 07/11] clk: qcom: rpmh: add support for SAR2130P
` [PATCH v5 08/11] clk: qcom: add support for GCC on SAR2130P
` [PATCH v5 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
` [PATCH v5 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
` [PATCH v5 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
[PATCH v2 00/36] drm/vc4: Add support for BCM2712 / Pi5 display hardware
2024-10-27 21:17 UTC (38+ messages)
` [PATCH v2 01/36] drm/vc4: Use of_device_get_match_data to set generation
` [PATCH v2 02/36] drm/vc4: Fix reading of frame count on GEN5 / Pi4
` [PATCH v2 03/36] dt-bindings: display: Add BCM2712 HDMI bindings
` [PATCH v2 04/36] dt-bindings: display: Add BCM2712 HVS bindings
` [PATCH v2 05/36] dt-bindings: display: Add BCM2712 PixelValve bindings
` [PATCH v2 06/36] dt-bindings: display: Add BCM2712 MOP bindings
` [PATCH v2 07/36] dt-bindings: display: Add BCM2712 MOPLET bindings
` [PATCH v2 08/36] dt-bindings: display: Add BCM2712 KMS driver bindings
` [PATCH v2 09/36] drm/vc4: drv: Support BCM2712
` [PATCH v2 10/36] drm/vc4: hvs: Add support for BCM2712 HVS
` [PATCH v2 11/36] drm/vc4: crtc: Add support for BCM2712 PixelValves
` [PATCH v2 12/36] drm/vc4: hdmi: Add support for BCM2712 HDMI controllers
` [PATCH v2 13/36] drm/vc4: txp: Introduce structure to deal with revision differences
` [PATCH v2 14/36] drm/vc4: txp: Rename TXP data structure
` [PATCH v2 15/36] drm/vc4: txp: Add byte enable toggle bit
` [PATCH v2 16/36] drm/vc4: txp: Add horizontal and vertical size offset "
` [PATCH v2 17/36] drm/vc4: txp: Handle 40-bits DMA Addresses
` [PATCH v2 18/36] drm/vc4: txp: Move the encoder type in the variant structure
` [PATCH v2 19/36] drm/vc4: txp: Add a new TXP encoder type
` [PATCH v2 20/36] drm/vc4: txp: Add support for BCM2712 MOP
` [PATCH v2 21/36] drm/vc4: txp: Add BCM2712 MOPLET support
` [PATCH v2 22/36] drm/vc4: drv: Add support for 2712 D-step
` [PATCH v2 23/36] drm/vc4: hvs: Add in "
` [PATCH v2 24/36] drm/vc4: plane: Add "
` [PATCH v2 25/36] drm/vc4: hdmi: Support 2712 D-step register map
` [PATCH v2 26/36] drm/vc4: Add additional warn_on for incorrect revisions
` [PATCH v2 27/36] drm/vc4: Enable bg_fill if there are no planes enabled
` [PATCH v2 28/36] drm/vc4: Drop planes that are completely off-screen or 0 crtc size
` [PATCH v2 29/36] clk: bcm: rpi: Add ISP to exported clocks
` [PATCH v2 30/36] clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
` [PATCH v2 31/36] clk: bcm: rpi: Enable minimize for all firmware clocks
` [PATCH v2 32/36] clk: bcm: rpi: Create helper to retrieve private data
` [PATCH v2 33/36] clk: bcm: rpi: Add disp clock
` [PATCH v2 34/36] arm64: dts: broadcom: Add firmware clocks and power nodes to Pi5 DT
` [PATCH v2 35/36] arm64: dts: broadcom: Add display pipeline support to BCM2712
` [PATCH v2 36/36] arm64: dts: broadcom: Add DT for D-step version of BCM2712
[PATCH v3 0/5] clk: imx: scu and fracn pll update
2024-10-27 12:00 UTC (6+ messages)
` [PATCH v3 1/5] clk: imx: lpcg-scu: SW workaround for errata (e10858)
` [PATCH v3 2/5] clk: imx: fracn-gppll: correct PLL initialization flow
` [PATCH v3 3/5] clk: imx: fracn-gppll: fix pll power up
` [PATCH v3 4/5] clk: imx: clk-scu: fix clk enable state save and restore
` [PATCH v3 5/5] clk: imx: lpcg-scu: Skip HDMI LPCG clock save/restore
[PATCH] clk: qcom: Make GCC_8150 depend on QCOM_GDSC
2024-10-27 0:22 UTC (3+ messages)
[PATCH v4 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
2024-10-26 22:19 UTC (13+ messages)
` [PATCH v4 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
` [PATCH v4 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
` [PATCH v4 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
` [PATCH v4 04/11] dt-bindings: clock: qcom,sm8550-dispcc: "
` [PATCH v4 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
` [PATCH v4 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
` [PATCH v4 07/11] clk: qcom: rpmh: add support for SAR2130P
` [PATCH v4 08/11] clk: qcom: add support for GCC on SAR2130P
` [PATCH v4 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
` [PATCH v4 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
` [PATCH v4 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
[RESEND PATCH] clk: socfpga: arria10: Optimize local variables in clk_pll_recalc_rate()
2024-10-26 15:53 UTC
[PATCH v2 0/3] clk: samsung: Introduce Exynos8895 clock driver
2024-10-26 12:01 UTC (2+ messages)
` (subset) "
[PATCH] clk: imx: imx8-acm: Fix return value check in clk_imx_acm_attach_pm_domains()
2024-10-26 11:24 UTC
[PATCH] clk: meson clk-phase: fix division by zero in meson_clk_degrees_to_val()
2024-10-26 7:26 UTC
[PATCH] clk: clk-axi-clkgen: fix division by zero in axi_clkgen_calc_params()
2024-10-26 7:23 UTC
[PATCH v6 0/2] Add support for videocc, camcc, dispcc0 and dispcc1 on Qualcomm SA8775P platform
2024-10-25 18:42 UTC (5+ messages)
` [PATCH v6 1/2] arm64: dts: qcom: sa8775p: Update sleep_clk frequency
` [PATCH v6 2/2] arm64: dts: qcom: sa8775p: Add support for clock controllers
[PATCH v3 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
2024-10-25 18:32 UTC (15+ messages)
` [PATCH v3 01/11] dt-bindings: clock: qcom,rpmhcc: Add SAR2130P compatible
` [PATCH v3 02/11] dt-bindings: clock: qcom: document SAR2130P Global Clock Controller
` [PATCH v3 03/11] dt-bindings: clock: qcom,sm8550-tcsr: Add SAR2130P compatible
` [PATCH v3 04/11] dt-bindings: clock: qcom,sm8550-dispcc: "
` [PATCH v3 05/11] dt-bindings: clk: qcom,sm8450-gpucc: add SAR2130P compatibles
` [PATCH v3 06/11] clk: qcom: rcg2: add clk_rcg2_shared_floor_ops
` [PATCH v3 07/11] clk: qcom: rpmh: add support for SAR2130P
` [PATCH v3 08/11] clk: qcom: add support for GCC on SAR2130P
` [PATCH v3 09/11] clk: qcom: tcsrcc-sm8550: add SAR2130P support
` [PATCH v3 10/11] clk: qcom: dispcc-sm8550: enable support for SAR2130P
` [PATCH v3 11/11] clk: qcom: add SAR2130P GPU Clock Controller support
[PATCH] clk: mediatek: mt6735-apmixedsys: Fix an error handling path in clk_mt6735_apmixed_probe()
2024-10-25 15:46 UTC
[PATCH] clk: sunxi-ng: Constify struct ccu_reset_map
2024-10-25 16:12 UTC (2+ messages)
[PATCH v3 0/7] ASoC: add Allwinner H616 audio codec support
2024-10-25 15:23 UTC (7+ messages)
` [PATCH v3 1/7] clk: sunxi-ng: h616: Add sigma-delta modulation settings for audio PLL
` (subset) [PATCH v3 0/7] ASoC: add Allwinner H616 audio codec support
[RFC PATCH] clk: sunxi-ng: h616: Reparent CPU clock during frequency changes
2024-10-25 15:05 UTC (3+ messages)
[PATCH v6 3/3] clk: aspeed: add AST2700 clock driver
2024-10-25 14:56 UTC (3+ messages)
[PATCH v2 00/11] clk: qcom: add support for clock controllers on the SAR2130P platform
2024-10-25 14:53 UTC (4+ messages)
` [PATCH v2 07/11] clk: qcom: rpmh: add support for SAR2130P
[PATCH v4 0/4] Add CMN PLL clock controller driver for IPQ9574
2024-10-25 14:05 UTC (9+ messages)
` [PATCH v4 4/4] arm64: dts: qcom: Add CMN PLL node for IPQ9574 SoC
[PATCH 22/37] drm/vc4: txp: Add BCM2712 MOPLET support
2024-10-25 12:09 UTC (2+ messages)
[PATCH 21/37] drm/vc4: txp: Add support for BCM2712 MOP
2024-10-25 9:45 UTC (2+ messages)
[PATCH v5 0/3] mfd: twl: Add clock for TWL6030
2024-10-25 8:50 UTC (5+ messages)
` [PATCH v5 1/3] mfd: twl-core: Add a clock subdevice for the TWL6030
` (subset) "
[PATCH v5 0/8] Add support for videocc, camcc, dispcc0 and dispcc1 on Qualcomm SA8775P platform
2024-10-25 8:49 UTC (7+ messages)
` [PATCH v5 7/8] arm64: dts: qcom: Update sleep_clk frequency to 32000 on SA8775P
` [PATCH v5 8/8] arm64: dts: qcom: Add support for multimedia clock controllers
[PATCH 11/37] drm/vc4: hvs: Add support for BCM2712 HVS
2024-10-24 22:07 UTC (2+ messages)
[PATCH 00/37] drm/vc4: Add support for BCM2712 / Pi5 display hardware
2024-10-24 20:43 UTC (13+ messages)
` [PATCH 04/37] dt-bindings: display: Add BCM2712 HDMI bindings
` [PATCH 05/37] dt-bindings: display: Add BCM2712 HVS bindings
` [PATCH 06/37] dt-bindings: display: Add BCM2712 PixelValve bindings
` [PATCH 07/37] dt-bindings: display: Add BCM2712 MOP bindings
` [PATCH 08/37] dt-bindings: display: Add BCM2712 MOPLET bindings
` [PATCH 09/37] dt-bindings: display: Add BCM2712 KMS driver bindings
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox