messages from 2026-02-26 15:39:36 to 2026-03-01 01:21:20 UTC [more...]
FAILED: Patch "clk: clk-apple-nco: Add "apple,t8103-nco" compatible" failed to apply to 6.12-stable tree
2026-03-01 1:21 UTC
FAILED: Patch "clk: renesas: rzg2l: Fix intin variable size" failed to apply to 6.12-stable tree
2026-03-01 1:18 UTC
FAILED: Patch "clk: renesas: rzg2l: Select correct div round macro" failed to apply to 6.12-stable tree
2026-03-01 1:17 UTC
FAILED: Patch "clk: tegra: tegra124-emc: fix device leak on set_rate()" failed to apply to 6.18-stable tree
2026-03-01 1:17 UTC
[PATCH v2 0/6] SM6115/SM6125 MDSS core reset
2026-02-28 20:41 UTC (5+ messages)
` [PATCH v2 1/6] dt-bindings: clock: qcom,sm6115-dispcc: Define MDSS resets
` [PATCH v2 2/6] dt-bindings: clock: qcom,dispcc-sm6125: "
` [PATCH v2 3/6] clk: qcom: dispcc-sm6115: Add missing "
` [PATCH v2 4/6] clk: qcom: dispcc-sm6125: "
[PATCH 1/2] clk: samsung: pll: Fix possible truncation in a9fraco recalc rate
2026-02-28 14:58 UTC (3+ messages)
` [PATCH 2/2] clk: samsung: Use %pe format to simplify
[PATCH v2] firmware: exynos-acpm: Drop fake 'const' on handle pointer
2026-02-28 14:58 UTC (2+ messages)
[PATCH 0/3] Add clock support for CMU_G3D
2026-02-28 14:44 UTC (7+ messages)
` [PATCH 1/3] dt-bindings: clock: exynosautov920: add G3D clock definitions
` (subset) "
` [PATCH 2/3] clk: samsung: exynosautov920: add block G3D clock support
` (subset) "
` [PATCH 3/3] arm64: dts: exynosautov920: add CMU_G3D clock DT nodes
` (subset) "
[PATCH v2 0/4] Update gmac clocks and devicetree for sam9x7 mpu
2026-02-28 14:22 UTC (5+ messages)
` [PATCH v2 1/4] clk: at91: sam9x7: Remove gmac peripheral and generic clock entries with ID 67
` [PATCH v2 2/4] clk: at91: sam9x7: Rename macb0_clk to gmac_clk
[PATCH 00/13] clk: add new flag CLK_ROUNDING_FW_MANAGED
2026-02-28 13:31 UTC (35+ messages)
` [PATCH 01/13] "
` [PATCH 02/13] clk: test: add test suite for CLK_ROUNDING_FW_MANAGED flag
` [PATCH 03/13] clk: rp1: drop determine_rate op and use "
` [PATCH 04/13] clk: scpi: "
` [PATCH 05/13] clk: hisilicon: hi3660-stub: "
` [PATCH 06/13] clk: imx: scu: drop redundant init.ops variable assignment
` [PATCH 07/13] clk: imx: scu: drop determine_rate op and use CLK_ROUNDING_FW_MANAGED flag
` [PATCH 08/13] clk: qcom: rpm: "
` [PATCH 09/13] clk: qcom: rpmh: "
` [PATCH 10/13] clk: qcom: smd-rpm: "
` [PATCH 11/13] clk: renesas: rzg2l-cpg: "
` [PATCH 12/13] clk: samsung: acpm: "
` [PATCH 13/13] clk: sprd: "
[PATCH v8 00/18] Add dt-bindings and dtsi changes for CAMSS on x1e80100 silicon
2026-02-28 13:28 UTC (47+ messages)
` [PATCH v8 01/18] dt-bindings: media: qcom,x1e80100-camss: Assign correct main register bank to first address
` [PATCH v8 02/18] dt-bindings: media: qcom,x1e80100-camss: Convert from inline PHY definitions to PHY handles
` [PATCH v8 03/18] dt-bindings: media: qcom,x1e80100-camss: Add support for combo-mode endpoints
` [PATCH v8 04/18] dt-bindings: media: qcom,x1e80100-camss: Reduce iommus to five
` [PATCH v8 05/18] media: qcom: camss: Add legacy_phy flag to SoC definition structures
` [PATCH v8 06/18] media: qcom: camss: Add support for PHY API devices
` [PATCH v8 07/18] media: qcom: camss: Drop legacy PHY descriptions from x1e
` [PATCH v8 08/18] arm64: dts: qcom: x1e80100: Add CAMCC block definition
` [PATCH v8 09/18] arm64: dts: qcom: x1e80100: Add CCI definitions
` [PATCH v8 10/18] arm64: dts: qcom: x1e80100: Add MIPI CSI PHY nodes
` [PATCH v8 11/18] arm64: dts: qcom: x1e80100: Add CAMSS block definition
` [PATCH v8 12/18] arm64: dts: qcom: x1e80100-crd: Add pm8010 CRD pmic,id=m regulators
` [PATCH v8 13/18] arm64: dts: qcom: x1e80100-crd: Add ov08x40 RGB sensor on CSIPHY4
` [PATCH v8 15/18] arm64: dts: qcom: x1e80100-t14s: Add on ov02c10 "
` [PATCH v8 16/18] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add pm8010 camera PMIC with voltage levels for IR and RGB camera
` [PATCH v8 17/18] arm64: dts: qcom: x1e80100-lenovo-yoga-slim7x: Add ov02c10 RGB sensor on CSIPHY4
` [PATCH v8 18/18] arm64: dts: qcom: x1e80100-dell-inspiron14-7441: Switch on CAMSS RGB sensor
[PATCH v2 1/2] dt-bindings: clock: ast2600: Add reset definition for video
2026-02-28 12:16 UTC (4+ messages)
[PATCH 00/11] SCMI Clock rates discovery rework
2026-02-28 10:47 UTC (33+ messages)
` [PATCH 01/11] firmware: arm_scmi: Add clock determine_rate operation
` [PATCH 02/11] clk: scmi: Use new determine_rate clock operation
` [PATCH 03/11] firmware: arm_scmi: Simplify clock rates exposed interface
` [PATCH 04/11] clk: scmi: Use new simplified per-clock rate properties
` [PATCH 05/11] firmware: arm_scmi: Drop unused clock rate interfaces
` [PATCH 06/11] firmware: arm_scmi: Make clock rates allocation dynamic
` [PATCH 07/11] firmware: arm_scmi: Harden clock parents discovery
` [PATCH 08/11] firmware: arm_scmi: Refactor iterators internal allocation
` [PATCH 09/11] firmware: arm_scmi: Add bound iterators support
` [PATCH 10/11] firmware: arm_scmi: Use bound iterators to minimize discovered rates
` [PATCH 11/11] firmware: arm_scmi: Introduce all_rates_get clock operation
[PATCH v7 0/6] clk: Support spread spectrum and use it in clk-scmi
2026-02-28 10:02 UTC (5+ messages)
` [PATCH v7 5/6] clk: scmi: Introduce common header for SCMI clock interface
` [PATCH v7 6/6] clk: scmi: Add i.MX95 OEM extension support for SCMI clock driver
[PATCH v3 0/5] Support TQMa8QM
2026-02-27 23:30 UTC (6+ messages)
` [PATCH v3 1/5] dt-bindings: usb: cdns,usb3: support USB devices in DT
` [PATCH v3 2/5] arm64: dts: imx8qm-ss-hsio: Wire up DMA IRQ for PCIe
` [PATCH v3 3/5] dt-bindings: arm: fsl: add bindings for TQMa8x
` [PATCH v3 4/5] arm64: dts: freescale: add initial device tree "
[PATCH v5 00/20] Add support for DU and DSI on the Renesas RZ/G3E SoC
2026-02-27 18:29 UTC (5+ messages)
` [PATCH v5 01/20] clk: renesas: rzv2h: Add PLLDSI clk mux support
[PATCH v5 0/2] clk: clocking-wizard: add user clock monitor support
2026-02-27 18:15 UTC (3+ messages)
` [PATCH v5 1/2] dt-bindings: clock: xilinx: add description of user monitor interrupt
` [PATCH v5 2/2] clk: clocking-wizard: add user clock monitor support
[PATCH v5 00/28] lan966x pci device: Add support for SFPs
2026-02-27 16:50 UTC (34+ messages)
` [PATCH v5 01/28] Revert "treewide: Fix probing of devices in DT overlays"
` [PATCH v5 02/28] driver core: Rename get_dev_from_fwnode() wrapper to get_device_from_fwnode()
` [PATCH v5 03/28] of: dynamic: Fix overlayed devices not probing because of fw_devlink
` [PATCH v5 04/28] driver core: Avoid warning when removing a device while its supplier is unbinding
` [PATCH v5 05/28] bus: simple-pm-bus: Remove child devices when the bus is unbound
` [PATCH v5 06/28] bus: simple-pm-bus: Populate child nodes at probe
` [PATCH v5 07/28] driver core: fw_devlink: Introduce fw_devlink_set_device()
` [PATCH v5 08/28] drivers: core: Use fw_devlink_set_device()
` [PATCH v5 09/28] pinctrl: cs42l43: "
` [PATCH v5 10/28] cxl/test: Use device_set_node()
` [PATCH v5 11/28] cxl/test: Use fw_devlink_set_device()
` [PATCH v5 12/28] PCI: of: "
` [PATCH v5 13/28] PCI: of: Set fwnode device of newly created PCI device nodes
` [PATCH v5 14/28] PCI: of: Remove fwnode_dev_initialized() call for a PCI root bridge node
` [PATCH v5 15/28] i2c: core: Introduce i2c_get_adapter_physdev()
` [PATCH v5 16/28] i2c: mux: Set adapter physical device
` [PATCH v5 17/28] i2c: mux: Create missing devlink between mux and "
` [PATCH v5 18/28] of: property: Allow fw_devlink device-tree on x86
` [PATCH v5 19/28] clk: lan966x: Add MCHP_LAN966X_PCI dependency
` [PATCH v5 20/28] i2c: busses: at91: "
` [PATCH v5 21/28] misc: lan966x_pci: Fix dtso nodes ordering
` [PATCH v5 22/28] misc: lan966x_pci: Split dtso in dtsi/dtso
` [PATCH v5 23/28] misc: lan966x_pci: Rename lan966x_pci.dtso to lan966x_evb_lan9662_nic.dtso
` [PATCH v5 24/28] PCI: Add Microchip LAN9662 PCI Device ID
` [PATCH v5 25/28] misc: lan966x_pci: Introduce board specific data
` [PATCH v5 26/28] misc: lan966x_pci: Add dtsi/dtso nodes in order to support SFPs
` [PATCH v5 27/28] misc: lan966x_pci: Sort the drivers list in Kconfig help
` [PATCH v5 28/28] misc: lan966x_pci: Add drivers needed to support SFPs "
[PATCH v7 00/15] PCI: renesas: Add RZ/G3E PCIe controller support
2026-02-27 15:43 UTC (18+ messages)
` [PATCH v7 01/15] PCI: rzg3s-host: Fix reset handling in probe error path
` [PATCH v7 02/15] PCI: rzg3s-host: Reorder reset assertion during suspend
` [PATCH v7 03/15] PCI: renesas: rzg3s: Rework inbound window algorithm for multi-SoC support
` [PATCH v7 04/15] clk: renesas: r9a09g047: Add PCIe clocks and reset
` [PATCH v7 05/15] dt-bindings: PCI: renesas,r9a08g045s33-pcie: Fix naming properties
` [PATCH v7 06/15] dt-bindings: PCI: renesas,r9a08g045s33-pcie: Document RZ/G3E SoC
` [PATCH v7 07/15] PCI: rzg3s-host: Make SYSC register offsets SoC-specific
` [PATCH v7 08/15] PCI: rzg3s-host: Make configuration reset lines optional
` [PATCH v7 09/15] PCI: rzg3s-host: Add SoC-specific configuration and initialization callbacks
` [PATCH v7 10/15] PCI: rzg3s-host: Explicitly set class code for RZ/G3E compatibility
` [PATCH v7 11/15] PCI: rzg3s-host: Add PCIe Gen3 (8.0 GT/s) link speed support
` [PATCH v7 12/15] PCI: rzg3s-host: Add support for RZ/G3E PCIe controller
` [PATCH v7 13/15] arm64: dts: renesas: r9a09g047: Add PCIe node
` [PATCH v7 14/15] arm64: dts: renesas: r9a09g047e57-smarc-som: Add PCIe reference clock
` [PATCH v7 15/15] arm64: dts: renesas: r9a09g047e57-smarc: Enable PCIe
[PATCH v1] media: aspeed: Fix driver probe failure
2026-02-27 15:35 UTC (4+ messages)
[PATCH v6 00/16] PCI: renesas: Add RZ/G3E PCIe controller support
2026-02-27 14:32 UTC (13+ messages)
` [PATCH v6 08/16] PCI: rzg3s-host: Make SYSC register offsets SoC-specific
` [PATCH v6 11/16] PCI: rzg3s-host: Explicitly set class code for RZ/G3E compatibility
` [PATCH v6 12/16] PCI: rzg3s-host: Add PCIe Gen3 (8.0 GT/s) link speed support
` [PATCH v6 13/16] PCI: rzg3s-host: Add support for RZ/G3E PCIe controller
[PATCH v6 0/8] Add generic PHY driver used by MACB/GEM on EyeQ5
2026-02-27 14:08 UTC (5+ messages)
` [PATCH v6 3/8] phy: Add driver for EyeQ5 Ethernet PHY wrapper
[PATCH v3 00/13] Introducing the Mobileye EyeQ6Lplus SoC
2026-02-27 13:54 UTC (3+ messages)
[PATCH v3 0/8] Add versaclock3 support for RZ/V2H and RZ/V2N EVKs
2026-02-27 11:06 UTC (3+ messages)
` [PATCH v3 5/8] clk: versaclock3: Prefix clock names with DT node name
[PATCH v14 0/4] Add driver support for ESWIN eic700 SoC clock controller
2026-02-27 9:58 UTC (2+ messages)
[PATCH v9 0/7] Add dt-bindings and dtsi changes for CAMSS on x1e80100 silicon
2026-02-27 8:58 UTC (12+ messages)
` [PATCH v9 1/7] dt-bindings: media: qcom,x1e80100-camss: Add optional PHY handle definitions
` [PATCH v9 3/7] dt-bindings: media: qcom,x1e80100-camss: Add iommus minItems: 5
` [PATCH v9 4/7] dt-bindings: media: qcom,x1e80100-camss: Allow CSIPHY supplies to be optional
` [PATCH v9 6/7] media: qcom: camss: Add support for PHY API devices
[PATCH v2] clk: scu/imx8qxp: do not register driver in probe()
2026-02-27 0:55 UTC (4+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox