messages from 2026-08-21 08:12:58 to 2026-08-23 09:38:17 UTC [more...]
[PATCH v2 0/8] clk: sunxi-ng: Add support for Allwinner A733 CCU and PRCM
2026-08-23 9:38 UTC (3+ messages)
` [PATCH v2 4/8] clk: sunxi-ng: a733: Add PLL clocks support
[PATCH 0/2] iio: Make sure clk_init_data is fully initialized
2026-08-23 1:18 UTC (5+ messages)
` [PATCH 1/2] iio: adc: meson-saradc: "
` [PATCH 2/2] iio: frequency: adf4350: "
[PATCH net-next 0/3] net: Make sure clk_init_data is fully initialized
2026-08-22 19:44 UTC (8+ messages)
` [PATCH net-next 1/3] net: macb: "
` [PATCH net-next 2/3] net: mdio: mux-meson-g12a: "
` [PATCH net-next 3/3] net: phy: air_en8811h: "
[PATCH 00/12] Add initial support for Qualcomm SM7250 SoC
2026-08-22 13:59 UTC (7+ messages)
` [PATCH 01/12] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH 05/12] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC bindings "
[PATCH v2 00/13] Add initial support for Qualcomm SM7250 SoC
2026-08-22 13:51 UTC (4+ messages)
` [PATCH v2 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
[PATCH] clk: qcom: ipq-cmn-pll: keep the CMN block bus clocks enabled
2026-08-22 11:19 UTC (7+ messages)
[PATCH 00/10] Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC
2026-08-22 7:38 UTC (15+ messages)
` [PATCH 01/10] soc: renesas: Identify RZ/G2M v3.0 SoC
` [PATCH 02/10] dt-bindings: power: Add r8a774a3 SYSC power domain definitions
` [PATCH 03/10] pmdomain: renesas: rcar-sys: Add r8a774a3 support
` [PATCH 04/10] soc: renesas: Enable SYSC driver for r8a774a3
` [PATCH 05/10] soc: renesas: rcar-rst: Add support for RZ/G2M v3.0
` [PATCH 06/10] dt-bindings: clock: Add r8a774a3 CPG Core Clock definitions
` [PATCH 07/10] clk: renesas: Add support for RZ/G2M v3.0
` [PATCH 08/10] arm64: dts: renesas: Add initial SoC DTSI "
` [PATCH 09/10] arm64: dts: renesas: Add HiHope RZ/G2M v3.0 SoC main board support
` [PATCH 10/10] arm64: dts: renesas: Add HiHope RZ/G2M v3.0 SoC sub "
[PATCH] clk: qcom: camcc-sdm845/670: Raise CSIPHY timer clock limit
2026-08-22 2:38 UTC (2+ messages)
[PATCH] clk: mstar: msc313-mpll: fix off-by-one in clock array allocation
2026-08-21 23:58 UTC
[PATCH v6 0/2] Add LPASS VA CSR HeartBeat pulse clock support
2026-08-21 17:56 UTC (3+ messages)
` [PATCH v6 1/2] dt-bindings: clock: qcom: Add LPASS VA CSR HeartBeat pulse clock
` [PATCH v6 2/2] clk: qcom: Add LPASS VA CSR heartbeat "
[PATCH v5 0/2] Add LPASS VA CSR HeartBeat pulse clock support
2026-08-21 17:49 UTC (6+ messages)
` [PATCH v5 1/2] dt-bindings: clock: qcom: Add LPASS VA CSR HeartBeat pulse clock
[PATCH 00/15] Add initial support for Qualcomm Kuno SoC
2026-08-21 16:35 UTC (4+ messages)
` [PATCH 10/15] dt-bindings: clock: qcom: Add Kuno Global Clock Controller
[PATCH v2 00/15] Add initial support for Qualcomm Kuno SoC
2026-08-21 16:29 UTC (9+ messages)
` [PATCH v2 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
` [PATCH v2 09/15] pinctrl: qcom: Add Kuno pinctrl driver
[PATCH v3 00/15] Add initial support for Qualcomm Kuno SoC
2026-08-21 16:25 UTC (20+ messages)
` [PATCH v3 01/15] soc: qcom: geni-se: allow selection on 32-bit ARM Qualcomm SoCs
` [PATCH v3 02/15] dt-bindings: power: rpmpd: Document Kuno RPMh power domains
` [PATCH v3 03/15] pmdomain: qcom: rpmhpd: Add power domains for Kuno
` [PATCH v3 04/15] dt-bindings: clock: qcom,rpmhcc: Add Kuno RPMh clock controller
` [PATCH v3 05/15] clk: qcom: clk-rpmh: Add support for Kuno RPMh clocks
` [PATCH v3 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
` [PATCH v3 07/15] interconnect: qcom: Add Kuno interconnect provider driver
` [PATCH v3 08/15] dt-bindings: pinctrl: qcom: Add Kuno TLMM
` [PATCH v3 09/15] pinctrl: qcom: Add Kuno pinctrl driver
` [PATCH v3 10/15] dt-bindings: clock: qcom: Add Kuno Global Clock Controller
` [PATCH v3 11/15] clk: qcom: Add Global Clock Controller driver for Kuno
` [PATCH v3 12/15] dt-bindings: interrupt-controller: qcom,pdc: Add Kuno compatible string
` [PATCH v3 13/15] dt-bindings: firmware: qcom,scm: Document SCM on Kuno SoC
` [PATCH v3 14/15] dt-bindings: arm: qcom: Document Kuno IDP board
` [PATCH v3 15/15] ARM: dts: qcom: Add initial device tree for Kuno SoC
[PATCH v4 00/13] Add initial support for Qualcomm SM7250 SoC
2026-08-21 15:40 UTC (14+ messages)
` [PATCH v4 01/13] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH v4 02/13] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v4 03/13] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v4 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v4 05/13] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible "
` [PATCH v4 06/13] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v4 07/13] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
` [PATCH v4 08/13] pmdomain: qcom: rpmhpd: Add RMPh power domains "
` [PATCH v4 09/13] dt-bindings: arm: cpus: Document Kryo 475 CPUs
` [PATCH v4 10/13] dt-bindings: firmware: qcom,scm: Document SM7250 SCM
` [PATCH v4 11/13] dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
` [PATCH v4 12/13] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v4 13/13] arm64: dts: qcom: Add SM7250 devicetree file
[PATCH 00/45] clk: Make sure clk_init_data is fully initialized (part two)
2026-08-21 14:04 UTC (56+ messages)
` [PATCH 01/45] clk: aspeed: Make sure clk_init_data is fully initialized
` [PATCH 02/45] clk: at91: "
` [PATCH 03/45] clk: bcm: iproc: "
` [PATCH 04/45] clk: berlin: "
` [PATCH 05/45] clk: cdce925: "
` [PATCH 06/45] clk: clk-axi-clkgen: "
` [PATCH 07/45] clk: cs2000-cp: "
` [PATCH 08/45] clk: davinci: "
` [PATCH 09/45] clk: fractional-divider: "
` [PATCH 10/45] clk: gemini: "
` [PATCH 11/45] clk: highbank: "
` [PATCH 12/45] clk: hisilicon: "
` [PATCH 13/45] clk: imx: "
` [PATCH 14/45] clk: ingenic: "
` [PATCH 15/45] clk: keystone: "
` [PATCH 16/45] clk: lmk04832: "
` [PATCH 17/45] clk: mediatek: "
` [PATCH 18/45] clk: milbeaut: "
` [PATCH 19/45] clk: mmp: "
` [PATCH 20/45] clk: mvebu: "
` [PATCH 21/45] clk: mxs: "
` [PATCH 22/45] clk: nomadik: "
` [PATCH 23/45] clk: npcm7xx: "
` [PATCH 24/45] clk: nxp: "
` [PATCH 25/45] clk: pistachio: "
` [PATCH 26/45] clk: pwm: "
` [PATCH 27/45] clk: renesas: "
` [PATCH 28/45] clk: rockchip: "
` [PATCH 29/45] clk: samsung: "
` [PATCH 30/45] clk: scpi: "
` [PATCH 31/45] clk: silabs: "
` [PATCH 32/45] clk: socfpga: "
` [PATCH 33/45] clk: spear: "
` [PATCH 34/45] clk: stm32: "
` [PATCH 35/45] clk: st: "
` [PATCH 36/45] clk: sunxi: "
` [PATCH 37/45] clk: tegra: "
` [PATCH 38/45] clk: uniphier: "
` [PATCH 39/45] clk: ux500: "
` [PATCH 40/45] clk: versatile: "
` [PATCH 41/45] clk: vt8500: "
` [PATCH 42/45] clk: x86: "
` [PATCH 43/45] clk: xgene: "
` [PATCH 44/45] clk: xilinx: "
` [PATCH 45/45] clk: zynqmp: "
[PATCH] clk: at91: main: Drop unneeded cast in at91_clk_register_main_osc()
2026-08-21 13:42 UTC (2+ messages)
[PATCH 0/2] drm: Make sure clk_init_data is fully initialized
2026-08-21 13:41 UTC (6+ messages)
` [PATCH 1/2] drm/sun4i: "
` [PATCH 2/2] drm/tegra: "
[PATCH 0/2] ARM/soc: Make sure clk_init_data is fully initialized
2026-08-21 12:37 UTC (5+ messages)
` [PATCH 1/2] ARM: versatile: clock: "
` [PATCH 2/2] soc/tegra: pmc: "
[PATCH] clk: imx: composite-93: return timeout from gate enable
2026-08-21 11:49 UTC (2+ messages)
[PATCH 0/2] mmc: Make sure clk_init_data is fully initialized
2026-08-21 11:36 UTC (7+ messages)
` [PATCH 1/2] mmc: meson-gx: FIXME: "
` [PATCH 2/2] mmc: sdhci-of-arasan: "
[PATCH 0/5] rtc: Make sure clk_init_data is fully initialized
2026-08-21 10:54 UTC (11+ messages)
` [PATCH 1/5] rtc: hym8563: "
` [PATCH 2/5] rtc: m41t80: "
` [PATCH 3/5] rtc: nct3018y: "
` [PATCH 4/5] rtc: philips: "
` [PATCH 5/5] rtc: microcrystal: "
[PATCH v3 0/3] clk: qcom: gcc-glymur: Tie the CX power domain to controller
2026-08-21 10:34 UTC (4+ messages)
[PATCH v3 00/13] Add initial support for Qualcomm SM7250 SoC
2026-08-21 10:31 UTC (14+ messages)
` [PATCH v3 02/13] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v3 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v3 06/13] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v3 07/13] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
` [PATCH v3 08/13] pmdomain: qcom: rpmhpd: Add RMPh power domains "
` [PATCH v3 09/13] dt-bindings: arm: cpus: Document Kryo 475 CPUs
` [PATCH v3 10/13] dt-bindings: firmware: qcom,scm: Document SM7250 SCM
` [PATCH v3 11/13] dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
` [PATCH v3 12/13] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v3 13/13] arm64: dts: qcom: Add SM7250 devicetree file
[PATCH 0/2] phy: Make sure clk_init_data is fully initialized
2026-08-21 10:29 UTC (5+ messages)
` [PATCH 1/2] phy: freescale: fsl-samsung-hdmi: "
` [PATCH 2/2] phy: rockchip: "
[PATCH treewide 0/5] clk: Make sure clk_init_data is fully initialized (part 1)
2026-08-21 10:16 UTC (2+ messages)
[PATCH 0/3] media: Make sure clk_init_data is fully initialized
2026-08-21 10:15 UTC (5+ messages)
` [PATCH 1/3] media: cec: meson: ao-cec-g12a: "
` [PATCH 2/3] media: microchip: "
` [PATCH 3/3] media: samsung: exynos4-is: "
[PATCH] i2c: bcm2835: Make sure clk_init_data is fully initialized
2026-08-21 10:12 UTC (2+ messages)
[PATCH] peci: controller: aspeed: Make sure clk_init_data is fully initialized
2026-08-21 10:08 UTC
[PATCH] MIPS: Alchemy: clock: Make sure clk_init_data is fully initialized
2026-08-21 10:05 UTC
[PATCH 0/3] ASoC: Make sure clk_init_data is fully initialized
2026-08-21 9:04 UTC (6+ messages)
` [PATCH 1/3] ASoC: codecs: lpass: "
` [PATCH 2/3] ASoC: codecs: wcd934x: "
` [PATCH 3/3] ASoC: tlv320aic32x4: "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox