messages from 2026-08-28 13:48:24 to 2026-09-02 07:18:38 UTC [more...]
[PATCH 00/45] clk: Make sure clk_init_data is fully initialized (part two)
2026-09-02 7:18 UTC (5+ messages)
` [PATCH 30/45] clk: scpi: Make sure clk_init_data is fully initialized
[PATCH v2 0/2] clk: ti: mux: resolve parent clocks by DT index, not by name
2026-09-02 6:26 UTC (2+ messages)
[PATCH 1/1] dt-bindings: clock: imx5: add assigned-clock* properties
2026-09-02 6:14 UTC (2+ messages)
[PATCH 1/2] clk: rockchip: rk3399: add 85.5 MHz rate to PLL rate table
2026-09-02 3:50 UTC (3+ messages)
` [PATCH 2/2] drm/rockchip: vop: don't round the pixel clock when the encoder owns the PLL
[PATCH 00/12] Add TH1520 USB support
2026-09-01 18:32 UTC (3+ messages)
` [PATCH 12/12] riscv: dts: thead: enable USB3 ports on Lichee Pi 4A
[PATCH 0/3] ASoC: Make sure clk_init_data is fully initialized
2026-08-30 22:56 UTC (2+ messages)
[PATCH v2 00/15] drm: starfive: jh7110: Enable display subsystem
2026-09-01 18:14 UTC (41+ messages)
` [PATCH v2 01/15] dt-bindings: phy: Add starfive,jh7110-inno-hdmi-phy
` [PATCH v2 02/15] dt-bindings: display: bridge: Add starfive,jh7110-inno-hdmi-controller
` [PATCH v2 04/15] drm/bridge: inno-hdmi: Split probe out of bind
` [PATCH v2 05/15] drm/bridge: inno-hdmi: Allow the register map to come from a parent
` [PATCH v2 06/15] drm/bridge: inno-hdmi: Add .disable platform operation
` [PATCH v2 07/15] drm/bridge: inno-hdmi: Add .mode_valid "
` [PATCH v2 08/15] soc: starfive: Add jh7110-hdmi-subsystem driver
` [PATCH v2 09/15] clk: starfive: jh7110-vout: Allow pixel clock rate propagation
` [PATCH v2 10/15] drm/bridge: starfive: Add JH7110 HDMI controller driver
` [PATCH v2 11/15] phy: Add common Innosilicon HDMI PHY helpers
` [PATCH v2 12/15] phy: rockchip: inno-hdmi: Use the common Innosilicon "
` [PATCH v2 13/15] phy: starfive: Add jh7110-inno-hdmi-phy driver
` [PATCH v2 14/15] riscv: dts: starfive: jh7110: Update DT for display subsystem
` [PATCH v2 15/15] MAINTAINERS: Add StarFive JH7110 display subsystem entry
` [PATCH v2 03/15] dt-bindings: mfd: Add starfive,jh7110-hdmi-subsystem
[PATCH v5 00/15] Add initial support for Qualcomm Kuno SoC
2026-09-01 17:22 UTC (14+ messages)
` [PATCH v5 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
` [PATCH v5 09/15] pinctrl: qcom: Add Kuno pinctrl driver
` [PATCH v5 10/15] dt-bindings: clock: qcom: Add Kuno Global Clock Controller
` [PATCH v5 15/15] ARM: dts: qcom: Add initial device tree for Kuno SoC
` (subset) [PATCH v5 00/15] Add initial support for Qualcomm "
[PATCH v9 00/12] Add initial support for Qualcomm SM7250 SoC
2026-09-01 16:21 UTC (20+ messages)
` [PATCH v9 01/12] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH v9 02/12] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v9 03/12] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v9 04/12] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v9 05/12] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible "
` [PATCH v9 06/12] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v9 07/12] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
` [PATCH v9 08/12] pmdomain: qcom: rpmhpd: Add RPMh power domains "
` [PATCH v9 09/12] dt-bindings: firmware: qcom,scm: Document SM7250 SCM
` [PATCH v9 10/12] dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
` [PATCH v9 11/12] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v9 12/12] arm64: dts: qcom: Add SM7250 devicetree file
[PATCH v11 0/2] Support spread spectrum clocking for i.MX8M PLLs
2026-09-01 16:01 UTC (5+ messages)
` [PATCH v11 1/2] clk: validate spread spectrum configuration
` [PATCH v11 2/2] clk: imx: pll14xx: support spread spectrum clock generation
[PATCH 0/2] Rockchip softrst cleanup
2026-09-01 15:13 UTC (3+ messages)
` [PATCH 1/2] clk: rockchip: Remove dead code from softrst driver
` [PATCH 2/2] clk: rockchip: softrst: Remove unused num_regs member
[PATCH 00/10] Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC
2026-09-01 15:12 UTC (14+ messages)
` [PATCH 02/10] dt-bindings: power: Add r8a774a3 SYSC power domain definitions
` [PATCH 06/10] dt-bindings: clock: Add r8a774a3 CPG Core Clock definitions
` [PATCH 08/10] arm64: dts: renesas: Add initial SoC DTSI for RZ/G2M v3.0
` [PATCH 09/10] arm64: dts: renesas: Add HiHope RZ/G2M v3.0 SoC main board support
[PATCH] clk: zynq: return -ETIMEDOUT if the PLL never locks
2026-09-01 13:01 UTC (2+ messages)
[PATCH v2] clk: fix self-consuming provider module pinning
2026-09-01 11:11 UTC
[PATCH] clk: actions: Drop unneeded forward declarations for clk_fixed_factor_ops
2026-09-01 9:40 UTC (2+ messages)
[PATCH v8 00/12] Add initial support for Qualcomm SM7250 SoC
2026-09-01 8:57 UTC (15+ messages)
` [PATCH v8 01/12] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH v8 02/12] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v8 03/12] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v8 04/12] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v8 05/12] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible "
` [PATCH v8 06/12] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v8 07/12] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
` [PATCH v8 08/12] pmdomain: qcom: rpmhpd: Add RPMh power domains "
` [PATCH v8 09/12] dt-bindings: firmware: qcom,scm: Document SM7250 SCM
` [PATCH v8 10/12] dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
` [PATCH v8 11/12] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v8 12/12] arm64: dts: qcom: Add SM7250 devicetree file
[PATCH v14 00/11] clk / reset: realtek: Add RTD1625 clock and reset support
2026-09-01 7:41 UTC (13+ messages)
` [PATCH v14 01/11] dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller
` [PATCH v14 02/11] reset: Add Realtek basic reset support
` [PATCH v14 03/11] reset: realtek: Add RTD1625 reset controller driver
` [PATCH v14 04/11] clk: realtek: Introduce common probe()
` [PATCH v14 05/11] clk: realtek: Add support for phase locked loops (PLLs)
` [PATCH v14 06/11] clk: realtek: Add support for gate clock
` [PATCH v14 07/11] clk: realtek: Add support for mux clock
` [PATCH v14 08/11] clk: realtek: Add support for MMC-tuned PLL clocks
` [PATCH v14 09/11] clk: realtek: Add RTD1625-CRT clock controller driver
` [PATCH v14 10/11] clk: realtek: Add RTD1625-ISO "
` [PATCH v14 11/11] arm64: dts: realtek: Add clock support for RTD1625
[PATCH v7 00/12] Add initial support for Qualcomm SM7250 SoC
2026-09-01 6:43 UTC (9+ messages)
` [PATCH v7 01/12] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH v7 02/12] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v7 03/12] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v7 04/12] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v7 05/12] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible "
` [PATCH v7 06/12] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v7 07/12] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
` [PATCH v7 08/12] pmdomain: qcom: rpmhpd: Add RPMh power domains "
[PATCH v6 00/13] Add initial support for Qualcomm SM7250 SoC
2026-09-01 6:35 UTC (6+ messages)
` [PATCH v6 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` (subset) [PATCH v6 00/13] Add initial support for Qualcomm SM7250 SoC
[PATCH 0/2] clk: qcom: negcc-nord: Add the secondary QUSB2 PHY reset
2026-09-01 5:43 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: clock: qcom: nord-negcc: "
` [PATCH 2/2] clk: qcom: negcc-nord: "
[PATCH v4 0/4] clk: qcom: Migrate x1e80100 TCSR to clk_ref helper
2026-09-01 2:09 UTC (7+ messages)
` [PATCH v4 1/4] dt-bindings: clock: qcom: Move x1e80100 TCSR to own binding
` [PATCH v4 3/4] arm64: dts: qcom: hamoa: Drop unused #reset-cells from TCSR node
` (subset) [PATCH v4 0/4] clk: qcom: Migrate x1e80100 TCSR to clk_ref helper
[PATCH] dt-bindings: clock: qcom,sm6375-gcc: Merge SM7150 into SM6375
2026-09-01 2:09 UTC (2+ messages)
[PATCH v2 0/6] clk: qcom: Add video and camera clock controller support for Nord
2026-08-31 20:21 UTC (2+ messages)
` (subset) "
[PATCH v10 00/10] Add support for Video, Camera, Graphics clock controllers on Eliza
2026-08-31 20:21 UTC (2+ messages)
` (subset) "
[PATCH 0/2] clk: qcom: Mark the GPU CX GDSC as votable for Glymur and Kaanapali
2026-08-31 20:21 UTC (2+ messages)
[PATCH RFT 0/3] Fix always-enabling PCIE_RSCC clocks for multiple clk drivers
2026-08-31 20:21 UTC (2+ messages)
[PATCH 0/2] clk: qcom: Add Graphics clock controllers support for Qualcomm Maili SoC
2026-08-31 20:21 UTC (2+ messages)
` (subset) "
[PATCH 0/2] clk: qcom: gcc-qcs8300: Add support for TSCSS clocks
2026-08-31 20:21 UTC (2+ messages)
` (subset) "
[PATCH v10 0/4] media: qcom: venus: add MSM8939 support
2026-08-31 20:21 UTC (2+ messages)
` (subset) "
[PATCH v3 0/3] SM8450 QoL changes (dispcc)
2026-08-31 20:21 UTC (2+ messages)
[PATCH v2 0/2] clk: qcom: Add GPUCC and GXCLK support for Hawi
2026-08-31 20:21 UTC (2+ messages)
` (subset) "
[PATCH v10 0/1] Support spread spectrum clocking for i.MX8M PLLs
2026-08-31 18:48 UTC (3+ messages)
` [PATCH v10 1/1] clk: imx: pll14xx: support spread spectrum clock generation
[PATCH] clk: qcom: Sort Nord clock driver entries in Kconfig
2026-08-31 17:53 UTC (3+ messages)
[PATCH AUTOSEL 6.18-5.10] clk: keystone: don't cache clock rate
2026-08-31 16:57 UTC (11+ messages)
` [PATCH AUTOSEL 6.18-5.10] clk: socfpga: agilex: implement l3_main_free_clk
` [PATCH AUTOSEL 6.18] clk: qcom: clk-rpmh: Make all VRMs optional
` [PATCH AUTOSEL 6.18-6.1] clk: samsung: exynos850: mark APM I3C clocks as critical
` [PATCH AUTOSEL 6.18] clk: clk-axi-clkgen: Add support versal timings
` [PATCH AUTOSEL 6.18-5.10] clk: renesas: cpg-mssr: Add number of clock cells check
` [PATCH AUTOSEL 6.18] clk: samsung: exynos990: Fix PERIC0/1 USI clock types
[PATCH 0/4] arm64: amlogic: t7: describe the VIM4 supplies and keep the fabric clocks running
2026-08-31 12:44 UTC (10+ messages)
` [PATCH 1/4] clk: meson: t7: keep the memory "
` [PATCH 2/4] arm64: dts: amlogic: t7: fix the pin groups of two PWM outputs
` [PATCH 3/4] arm64: dts: amlogic: t7: khadas-vim4: add the PWM-driven supplies
` [PATCH 4/4] arm64: dts: amlogic: t7: fix the pin groups of the vsync PWM
` (subset) [PATCH 0/4] arm64: amlogic: t7: describe the VIM4 supplies and keep the fabric clocks running
[PATCH] clk: qcom: camcc-sc8280xp: unregister CAMCC_GDSC_CLK
2026-08-31 10:36 UTC (2+ messages)
[PATCH] clk: mediatek: Add missing depend for COMMON_CLK_MT8173
2026-08-31 9:06 UTC (3+ messages)
[PATCH v7 0/2] Add LPASS VA CSR HeartBeat pulse clock support
2026-08-31 6:33 UTC (3+ messages)
` [PATCH v7 1/2] dt-bindings: clock: qcom: Add LPASS VA CSR HeartBeat pulse clock
` [PATCH v7 2/2] clk: qcom: Add LPASS VA CSR heartbeat "
[PATCH v2] clk: spacemit: k3: add 1.8 GHz PLL5 and PLL8 rates
2026-08-31 3:06 UTC (3+ messages)
[PATCH] clk: spacemit: k3: add 2.0 GHz PLL3 and PLL4 rates
2026-08-31 2:56 UTC (4+ messages)
[PATCH v3] clk: spacemit: k3: add 1.8 GHz PLL5 and PLL8 rates
2026-08-31 3:35 UTC (2+ messages)
[PATCH v3 0/6] Add USB3.1 support for Agilex5
2026-08-29 0:35 UTC (3+ messages)
` [PATCH v3 6/6] usb: dwc3: add Altera Agilex5 support to generic platform driver
[PATCH v4 0/2] A proposal to add a gpio-locked fixed clock driver
2026-08-28 17:12 UTC (9+ messages)
` [PATCH v4 1/2] dt-bindings: Add GPIO-locked fixed clock
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox