messages from 2026-09-01 03:53:48 to 2026-09-03 12:09:01 UTC [more...]
[PATCH v2 00/17] drm/spacemit: add SpacemiT K3 display support
2026-09-03 12:08 UTC (5+ messages)
` [PATCH v2 07/17] drm/spacemit: add Saturn DPU register model
` [PATCH v2 11/17] drm/spacemit: add Saturn DPU DRM device driver
[PATCH] clk: renesas: rcar-gen3: Use FIELD_GET()
2026-09-03 12:05 UTC
[PATCH v3 00/12] clk: qcom: ipq-cmn-pll: Add IPQ5210 CMN PLL support
2026-09-03 11:59 UTC (9+ messages)
` [PATCH v3 04/12] clk: qcom: ipq-cmn-pll: Register CMN PLL /2 clock
` [PATCH v3 05/12] clk: qcom: ipq-cmn-pll: Add NSS clock support
` [PATCH v3 07/12] clk: qcom: ipq-cmn-pll: Add PON reference "
` [PATCH v3 09/12] clk: qcom: ipq-cmn-pll: Add clock gate support for fixed clocks
[PATCH v5 00/12] Ambarella CV75 SoC minimal bring-up
2026-09-03 11:56 UTC (5+ messages)
` [PATCH v5 10/12] serial: 8250: add Ambarella UART driver
` "
` "
[PATCH v5 00/15] Add initial support for Qualcomm Kuno SoC
2026-09-03 11:07 UTC (16+ messages)
` [PATCH v5 06/15] dt-bindings: interconnect: Add Qualcomm Kuno NoC
` [PATCH v5 07/15] interconnect: qcom: Add Kuno interconnect provider driver
` [PATCH v5 09/15] pinctrl: qcom: Add Kuno pinctrl driver
` [PATCH v5 15/15] ARM: dts: qcom: Add initial device tree for Kuno SoC
` (subset) [PATCH v5 00/15] Add initial support for Qualcomm "
[PATCH v5 0/2] clk: rs9: Fix and of_clk_hw_onecell_get() conversion
2026-09-03 10:23 UTC (4+ messages)
` [PATCH v5 1/2] clk: rs9: Add clock index range check to rs9_of_clk_get()
` [PATCH v5 2/2] clk: rs9: Convert to clk_hw_onecell_data and of_clk_hw_onecell_get()
[PATCH 0/4] arm64: amlogic: t7: describe the VIM4 supplies and keep the fabric clocks running
2026-09-03 10:05 UTC (3+ messages)
` (subset) "
[PATCH v3 00/12] R-Car X5H Ironhide CPG/MDLC SCMI remapping support
2026-09-03 10:03 UTC (21+ messages)
` [PATCH v3 01/12] dt-bindings: clock: renesas,r8a78000-cpg: Add renesas,scmi-firmware property
` [PATCH v3 02/12] dt-bindings: power: renesas,r8a78000-mdlc: Add firmware property
` [PATCH v3 03/12] firmware: arm_scmi: Add scmi_get_base_info()
` [PATCH v3 04/12] of: property: fw_devlink: Add support for renesas,scmi-firmware
` [PATCH v3 05/12] pmdomain: Make genpd_get_from_provider() public
` [PATCH v3 06/12] reset: Extract __reset_control_get_from_provider()
` [PATCH v3 07/12] reset: Add reset_control_get_from_provider_exclusive()
` [PATCH v3 08/12] clk: renesas: r8a78000: Add clk_hw to clk_map
` [PATCH v3 09/12] clk: renesas: r8a78000: Add SCMI remapping support
` [PATCH v3 10/12] pmdomain: "
` [PATCH v3 11/12] arm64: dts: renesas: ironhide: Enable SCMI devpd, sys, clock, and reset
` [PATCH v3 12/12] arm64: dts: renesas: ironhide: Add CPG/MDLC renesas,scmi-firmware properties
[PATCH v5 0/7] clk: Add support for clock nexus
2026-09-03 9:55 UTC (2+ messages)
[PATCH v2 0/2] clk: ti: mux: resolve parent clocks by DT index, not by name
2026-09-03 9:53 UTC (7+ messages)
[PATCH net-next v2 0/3] net: Make sure clk_init_data is fully initialized
2026-09-03 9:00 UTC (4+ messages)
` [PATCH net-next v2 1/3] net: macb: "
` [PATCH net-next v2 2/3] net: mdio: mux-meson-g12a: "
` [PATCH net-next v2 3/3] net: phy: air_en8811h: "
[PATCH v2 00/15] drm: starfive: jh7110: Enable display subsystem
2026-09-03 8:54 UTC (9+ messages)
` [PATCH v2 14/15] riscv: dts: starfive: jh7110: Update DT for "
` [PATCH v2 12/15] phy: rockchip: inno-hdmi: Use the common Innosilicon PHY helpers
` [PATCH v2 08/15] soc: starfive: Add jh7110-hdmi-subsystem driver
[PATCH v3 00/10] Support ROHM BD73800
2026-09-03 7:53 UTC (17+ messages)
` [PATCH v3 01/10] dt-bindings: mfd: common ROHM PMIC properties
` [PATCH v3 02/10] dt-bindings: rohm,bd*: Ref common ROHM bindings
` [PATCH v3 03/10] dt-bindings: regulator: ROHM BD73800 regulators
` [PATCH v3 04/10] dt-bindings: mfd: ROHM BD73800 PMIC
` [PATCH v3 05/10] mfd: Support for ROHM BD73800 PMIC core
` [PATCH v3 06/10] rtc: bd70528: Support RTC on ROHM BD73800
` [PATCH v3 07/10] regulator: bd71828: Support "
` [PATCH v3 08/10] clk: bd718x7: "
` [PATCH v3 09/10] gpio: bd73800: Support ROHM BD73800 PMIC GPIOs
` [PATCH v3 10/10] MAINTAINERS: Add ROHM BD73800 PMIC files
[PATCH v2] clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
2026-09-03 7:41 UTC (3+ messages)
[PATCH v4] clk: spacemit: k3: add CPU PLL rate tables
2026-09-03 3:06 UTC
[PATCH v11 0/2] Support spread spectrum clocking for i.MX8M PLLs
2026-09-03 1:51 UTC (8+ messages)
` [PATCH v11 1/2] clk: validate spread spectrum configuration
` [PATCH v11 2/2] clk: imx: pll14xx: support spread spectrum clock generation
[PATCHv4] clk: davinci: add COMPILE_TEST support
2026-09-02 23:00 UTC (2+ messages)
[PATCH] drivers/clk: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
2026-09-02 22:40 UTC (2+ messages)
[PATCHv3] clk: davinci: add COMPILE_TEST support
2026-09-02 22:20 UTC (3+ messages)
[PATCH] clk: actions: Drop unneeded forward declarations for clk_fixed_factor_ops
2026-09-02 22:14 UTC (3+ messages)
[PATCH v4 0/4] clk: qcom: Migrate x1e80100 TCSR to clk_ref helper
2026-09-02 21:44 UTC (4+ messages)
` [PATCH v4 4/4] arm64: dts: qcom: hamoa/purwa: Add QREF regulator supplies
` (subset) "
[PATCH v2 0/8] clk: sunxi-ng: Add support for Allwinner A733 CCU and PRCM
2026-09-02 14:58 UTC (4+ messages)
` [PATCH v2 4/8] clk: sunxi-ng: a733: Add PLL clocks support
[PATCH v2] clk: mstar: msc313-mpll: fix off-by-one in clock array allocation
2026-09-02 14:49 UTC (2+ messages)
[PATCH v9 00/12] Add initial support for Qualcomm SM7250 SoC
2026-09-02 13:41 UTC (22+ messages)
` [PATCH v9 01/12] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH v9 02/12] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v9 03/12] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v9 04/12] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v9 05/12] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible "
` [PATCH v9 06/12] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v9 07/12] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
` [PATCH v9 08/12] pmdomain: qcom: rpmhpd: Add RPMh power domains "
` [PATCH v9 09/12] dt-bindings: firmware: qcom,scm: Document SM7250 SCM
` [PATCH v9 10/12] dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
` [PATCH v9 11/12] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v9 12/12] arm64: dts: qcom: Add SM7250 devicetree file
[PATCH] MAINTAINERS: add Abel as reviewer for Qualcomm clocks drivers
2026-09-02 12:27 UTC (2+ messages)
[PATCH 0/2] clk: renesas: rzv2h: Convert to clk_hw provider API
2026-09-02 11:04 UTC (4+ messages)
` [PATCH 1/2] clk: renesas: rzv2h: Drop duplicated parent lookup in fixed_mod_status_clk_register()
` [PATCH 2/2] clk: renesas: rzv2h: Convert to clk_hw based provider API
[PATCH] clk: qcom: camcc-sdm845/670: Raise CSIPHY timer clock limit
2026-09-02 10:37 UTC (2+ messages)
[PATCH 0/5] clk: socfpga: add Agilex72 clock manager support
2026-09-02 10:32 UTC (6+ messages)
` [PATCH 3/5] clk: socfpga: agilex72: add clock manager driver for Agilex72
[PATCH v11 00/12] ZTE zx297520v3 clock bindings and driver
2026-09-02 10:29 UTC (3+ messages)
` [PATCH v11 04/12] ARM: dts: zte: Declare zx297520v3 CRM device nodes
[PATCH v12 0/3] Support spread spectrum clocking for i.MX8M PLLs
2026-09-02 10:07 UTC (4+ messages)
` [PATCH v12 1/3] clk: scmi: fix SSC permyriad conversion
` [PATCH v12 2/3] clk: validate spread spectrum configuration
` [PATCH v12 3/3] clk: imx: pll14xx: support spread spectrum clock generation
[PATCH 1/2] clk: rockchip: rk3399: add 85.5 MHz rate to PLL rate table
2026-09-02 8:42 UTC (4+ messages)
` [PATCH 2/2] drm/rockchip: vop: don't round the pixel clock when the encoder owns the PLL
[PATCH 00/45] clk: Make sure clk_init_data is fully initialized (part two)
2026-09-02 8:21 UTC (7+ messages)
` [PATCH 13/45] clk: imx: Make sure clk_init_data is fully initialized
` [PATCH 30/45] clk: scpi: "
[PATCH] clk: imx: composite-93: return timeout from gate enable
2026-09-02 8:19 UTC (2+ messages)
[PATCH 1/1] dt-bindings: clock: imx5: add assigned-clock* properties
2026-09-02 6:14 UTC (2+ messages)
[PATCH 00/12] Add TH1520 USB support
2026-09-01 18:32 UTC (3+ messages)
` [PATCH 12/12] riscv: dts: thead: enable USB3 ports on Lichee Pi 4A
[PATCH 0/3] ASoC: Make sure clk_init_data is fully initialized
2026-08-30 22:56 UTC (2+ messages)
[PATCH 0/2] Rockchip softrst cleanup
2026-09-01 15:13 UTC (3+ messages)
` [PATCH 1/2] clk: rockchip: Remove dead code from softrst driver
` [PATCH 2/2] clk: rockchip: softrst: Remove unused num_regs member
[PATCH 00/10] Add support for Renesas RZ/G2M v3.0 (a.k.a R8A774A3) SoC
2026-09-01 15:12 UTC (14+ messages)
` [PATCH 02/10] dt-bindings: power: Add r8a774a3 SYSC power domain definitions
` [PATCH 06/10] dt-bindings: clock: Add r8a774a3 CPG Core Clock definitions
` [PATCH 08/10] arm64: dts: renesas: Add initial SoC DTSI for RZ/G2M v3.0
` [PATCH 09/10] arm64: dts: renesas: Add HiHope RZ/G2M v3.0 SoC main board support
[PATCH] clk: zynq: return -ETIMEDOUT if the PLL never locks
2026-09-01 13:01 UTC (2+ messages)
[PATCH v2] clk: fix self-consuming provider module pinning
2026-09-01 11:11 UTC
[PATCH v8 00/12] Add initial support for Qualcomm SM7250 SoC
2026-09-01 8:57 UTC (15+ messages)
` [PATCH v8 01/12] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH v8 02/12] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v8 03/12] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v8 04/12] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v8 05/12] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible "
` [PATCH v8 06/12] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v8 07/12] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
` [PATCH v8 08/12] pmdomain: qcom: rpmhpd: Add RPMh power domains "
` [PATCH v8 09/12] dt-bindings: firmware: qcom,scm: Document SM7250 SCM
` [PATCH v8 10/12] dt-bindings: interrupt-controller: qcom,pdc: Document SM7250 PDC
` [PATCH v8 11/12] dt-bindings: cpufreq: qcom-hw: Document SM7250 cpufreq hardware
` [PATCH v8 12/12] arm64: dts: qcom: Add SM7250 devicetree file
[PATCH v14 00/11] clk / reset: realtek: Add RTD1625 clock and reset support
2026-09-01 7:41 UTC (13+ messages)
` [PATCH v14 01/11] dt-bindings: clock: Add Realtek RTD1625 Clock & Reset Controller
` [PATCH v14 02/11] reset: Add Realtek basic reset support
` [PATCH v14 03/11] reset: realtek: Add RTD1625 reset controller driver
` [PATCH v14 04/11] clk: realtek: Introduce common probe()
` [PATCH v14 05/11] clk: realtek: Add support for phase locked loops (PLLs)
` [PATCH v14 06/11] clk: realtek: Add support for gate clock
` [PATCH v14 07/11] clk: realtek: Add support for mux clock
` [PATCH v14 08/11] clk: realtek: Add support for MMC-tuned PLL clocks
` [PATCH v14 09/11] clk: realtek: Add RTD1625-CRT clock controller driver
` [PATCH v14 10/11] clk: realtek: Add RTD1625-ISO "
` [PATCH v14 11/11] arm64: dts: realtek: Add clock support for RTD1625
[PATCH v7 00/12] Add initial support for Qualcomm SM7250 SoC
2026-09-01 6:43 UTC (9+ messages)
` [PATCH v7 01/12] dt-bindings: arm: qcom,ids: Add SoC ID for SM7250
` [PATCH v7 02/12] soc: qcom: socinfo: Add SM7250 SoC ID
` [PATCH v7 03/12] dt-bindings: clock: Add SM7250 global clock controller
` [PATCH v7 04/12] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` [PATCH v7 05/12] dt-bindings: clock: qcom,rpmhcc: Document RPMHCC compatible "
` [PATCH v7 06/12] clk: qcom: rpmh: Add SM7250 rpmh clocks
` [PATCH v7 07/12] dt-bindings: power: qcom,rpmhpd: Document RPMh power domain for SM7250
` [PATCH v7 08/12] pmdomain: qcom: rpmhpd: Add RPMh power domains "
[PATCH v6 00/13] Add initial support for Qualcomm SM7250 SoC
2026-09-01 6:35 UTC (6+ messages)
` [PATCH v6 04/13] clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
` (subset) [PATCH v6 00/13] Add initial support for Qualcomm SM7250 SoC
[PATCH 0/2] clk: qcom: negcc-nord: Add the secondary QUSB2 PHY reset
2026-09-01 5:43 UTC (5+ messages)
` [PATCH 1/2] dt-bindings: clock: qcom: nord-negcc: "
` [PATCH 2/2] clk: qcom: negcc-nord: "
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox