messages from 2026-10-20 06:56:05 to 2026-10-20 19:30:05 UTC [more...]
[PATCH 0/8] i3c: renesas: Add RZ/G3L support
2026-10-20 19:29 UTC (14+ messages)
` [PATCH 1/8] i3c: renesas: Fix zero I2C SCL rate on pure I3C buses
` [PATCH 2/8] i3c: renesas: Drop comma after OF match table sentinel
` [PATCH 3/8] dt-bindings: i3c: renesas,i3c: Add RZ/G3L support
` [PATCH 4/8] i3c: renesas: "
` [PATCH 5/8] clk: renesas: r9a08g046: Add I3C clocks and resets
` [PATCH 6/8] pinctrl: renesas: rzg2l: Split SoC-specific masks in struct rzg2l_register_masks
` [PATCH 7/8] pinctrl: renesas: rzg2l: Add RZ/G3L support for selecting I3C power source
` [PATCH 8/8] arm64: dts: renesas: r9a08g046: Add I3C support
[PATCH 00/20] arm64: add Synaptics SL261X SoCs and RDK boards
2026-10-20 17:47 UTC (5+ messages)
` [PATCH 04/20] dt-bindings: i3c: dw: support up to two reset lines
[PATCH 0/3] clk: bcm2835: describe the BCM2711 GISB clock for the GENET MDIO controller
2026-10-20 15:40 UTC (7+ messages)
` [PATCH 1/3] dt-bindings: clock: bcm2835: add the BCM2711 GISB clock
` [PATCH 2/3] clk: bcm2835: register "
` [PATCH 3/3] ARM: dts: bcm2711: give the GENET MDIO controller its clock
[PATCH v3 0/8] of: property: Make fw_devlink follow GPIO, PWM and clock nexus maps
2026-10-20 14:27 UTC (14+ messages)
` [PATCH v3 1/8] of: base: Fix stack overflow in of_parse_phandle_with_args_map()
` [PATCH v3 2/8] of: property: fw_devlink: Follow GPIO nexus maps
` [PATCH v3 3/8] of: property: fw_devlink: Report unsupported supplier linking
` [PATCH v3 4/8] of: unittest: Test fw_devlink with GPIO nexus maps
` [PATCH v3 5/8] of: property: fw_devlink: Follow PWM "
` [PATCH v3 6/8] of: unittest: Test fw_devlink with "
` [PATCH v3 7/8] of: property: fw_devlink: Follow clock "
` [PATCH v3 8/8] of: unittest: Test fw_devlink with "
[PATCH v2 0/3] clk: qcom: sm8450: Fix eUSB clkref and camera clock collapse
2026-10-20 14:21 UTC (4+ messages)
` [PATCH v2 1/3] clk: qcom: gcc-sm8450: Parent the eUSB3 clkref to bi_tcxo
` [PATCH v2 2/3] clk: qcom: camcc-sm8450: Retain flops across camera GDSC collapse
` [PATCH v2 3/3] clk: qcom: camcc-sm8450: Park the camera RCGs when they are disabled
[PATCH DNI v3 00/15] media: rcar-fcp, vsp1: Enable on R-Car X5H
2026-10-20 13:22 UTC (4+ messages)
` [PATCH DNI v3 15/15] media: rcar-fcp: Check device revision at probe time
[PATCH v4 0/2] rust: clk: Add ExclusiveClk and use it in pwm-th1520
2026-10-20 13:03 UTC (3+ messages)
[PATCH v3 0/3] Use icc-clk for the SM8250 camera NoC AXI clock
2026-10-20 12:49 UTC (13+ messages)
` [PATCH v3 1/3] dt-bindings: clock: qcom,camcc-sm8250: add interconnect provider
` [PATCH v3 2/3] clk: qcom: camcc-sm8250: use icc-clk for camera NoC AXI clock
` [PATCH v3 3/3] arm64: dts: qcom: sm8250: add camcc interconnect cells
[PATCH] clk: qcom: gcc-ipq5018: mark 'gpll0_main' clock as critical
2026-10-20 12:46 UTC (6+ messages)
[PATCH] clk: qcom: gcc-eliza: Use retention for PCIe power domains
2026-10-20 12:41 UTC (5+ messages)
[PATCH 0/3] clk: qcom: sm8450: Fix eUSB3 clkref rate and camera power collapse
2026-10-20 12:37 UTC (3+ messages)
` [PATCH 1/3] clk: qcom: gcc-sm8450: Parent the eUSB3 clkref to bi_tcxo
[PATCH v13 00/13] ZTE zx297520v3 clock bindings and driver
2026-10-20 11:57 UTC (3+ messages)
` [PATCH v13 04/13] mfd: zx297520v3: Add a clock and reset MFD driver
[PATCH] clk: qcom: gcc-ipq6018: add fallback names for the bias PLL parents
2026-10-20 11:39 UTC (2+ messages)
[Regression v3] SM8750: cambistmclkcc + camcc together hard-reset the SoC on display blank
2026-10-20 11:02 UTC (5+ messages)
[PATCH v8 0/8] clk: add support for v1 / v2 clock rate negotiation and kunit tests
2026-10-20 10:11 UTC (4+ messages)
` [PATCH v8 3/8] clk: introduce new helper clk_hw_get_children_lcm() to calculate LCM of all child rates
[PATCH 00/10] clk: qcom: several fixes for stability on MSM8996/98 platforms
2026-10-20 10:10 UTC (15+ messages)
` [PATCH 04/10] clk: qcom: clk-rcg2: forward the gfx3d rate request to the parent
` [PATCH 05/10] clk: qcom: cpu-8996: move off the ACD leg while the PLL speeds up
` [PATCH 06/10] clk: qcom: mmcc-msm8996: keep mmss_mmagic_maxi_clk always enabled
` [PATCH 07/10] clk: qcom: cbf-msm8996: program the MSM8996 Pro post-divider
` [PATCH 08/10] dt-bindings: clock: qcom,msm8996-apcc: add the MSM8996 Pro compatible
` [PATCH 09/10] clk: qcom: cpu-8996: program the MSM8996 Pro droop code register
[PATCH 0/3] Subject: [PATCH 0/3] clk: stm32mp1: add I2S_CKIN as PLL4 source and keep boot-enabled clocks running
2026-10-20 9:48 UTC (4+ messages)
` [PATCH 1/3] clk: stm32mp1: add i2s_ckin as a clock source of PLL4
` [PATCH 2/3] clk: stm32mp1: don't disable a PLL while its P/Q/R outputs are enabled
` [PATCH 3/3] clk: stm32mp1: don't disable the ck_trace clock when unused
[PATCH 0/3] clk: stm32mp13: add the SPI1 to SPI5 bus clocks
2026-10-20 8:31 UTC (4+ messages)
` [PATCH 1/3] clk: stm32mp13: define the number of clocks in the driver
` [PATCH 2/3] dt-bindings: clock: stm32mp13: add SPI1 to SPI5 bus clocks
` [PATCH 3/3] clk: stm32mp13: add the "
[PATCH 0/5] clk: qcom: Add PDM GP_MN fractional clock divider driver and DT support
2026-10-20 7:30 UTC (5+ messages)
` [PATCH 1/5] dt-bindings: clock: qcom: Add bindings for PDM GP_MN clock divider
[PATCH v4 0/8] R-Car X5H Ironhide CPG/MDLC SCMI remapping support
2026-10-20 7:09 UTC (5+ messages)
` [PATCH v4 5/8] pmdomain: Make genpd_get_from_provider() return -EPROBE_DEFER
[PATCH v3 03/14] dt-bindings: clock: exynos8855: add peris clock definitions
2026-10-20 7:13 UTC (3+ messages)
` [PATCH v3 04/14] dt-bindings: clock: exynos8855: add hsi "
` [PATCH v3 05/14] dt-bindings: clock: exynos8855: add usb "
[PATCH v3 02/14] dt-bindings: clock: exynos8855: add top & peric clock definitions
2026-10-20 7:13 UTC
page: | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox