public inbox for linux-clk@vger.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@kernel.org>
To: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	alexandre.belloni@bootlin.com, linux-kernel@vger.kernel.org,
	robh+dt@kernel.org, boris.brezillon@bootlin.com,
	broonie@kernel.org, Cristian.Birsan@microchip.com,
	Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Applied "ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller" to the asoc tree
Date: Tue, 29 May 2018 15:59:06 +0100	[thread overview]
Message-ID: <E1fNg5a-0005qO-IW@debutante> (raw)
In-Reply-To: <1527251668-31396-5-git-send-email-codrin.ciubotariu@microchip.com>

The patch

   ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

>From 969cc0528e0efdfdeaa5bbc0ab707d8a7819a8ec Mon Sep 17 00:00:00 2001
From: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Date: Fri, 25 May 2018 15:34:25 +0300
Subject: [PATCH] ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S
 controller

This patch adds DT bindings for the new Atmel I2S controller embedded
inside sama5d2x SoCs.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 .../devicetree/bindings/sound/atmel-i2s.txt   | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/atmel-i2s.txt

diff --git a/Documentation/devicetree/bindings/sound/atmel-i2s.txt b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
new file mode 100644
index 000000000000..735368b8a73f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/atmel-i2s.txt
@@ -0,0 +1,47 @@
+* Atmel I2S controller
+
+Required properties:
+- compatible:     Should be "atmel,sama5d2-i2s".
+- reg:            Should be the physical base address of the controller and the
+                  length of memory mapped region.
+- interrupts:     Should contain the interrupt for the controller.
+- dmas:           Should be one per channel name listed in the dma-names property,
+                  as described in atmel-dma.txt and dma.txt files.
+- dma-names:      Two dmas have to be defined, "tx" and "rx".
+                  This IP also supports one shared channel for both rx and tx;
+                  if this mode is used, one "rx-tx" name must be used.
+- clocks:         Must contain an entry for each entry in clock-names.
+                  Please refer to clock-bindings.txt.
+- clock-names:    Should be one of each entry matching the clocks phandles list:
+                  - "pclk" (peripheral clock) Required.
+                  - "gclk" (generated clock) Optional (1).
+                  - "aclk" (Audio PLL clock) Optional (1).
+                  - "muxclk" (I2S mux clock) Optional (1).
+
+Optional properties:
+- pinctrl-0:      Should specify pin control groups used for this controller.
+- princtrl-names: Should contain only one value - "default".
+
+
+(1) : Only the peripheral clock is required. The generated clock, the Audio
+      PLL clock adn the I2S mux clock are optional and should only be set
+      together, when Master Mode is required.
+
+Example:
+
+	i2s@f8050000 {
+		compatible = "atmel,sama5d2-i2s";
+		reg = <0xf8050000 0x300>;
+		interrupts = <54 IRQ_TYPE_LEVEL_HIGH 7>;
+		dmas = <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(31))>,
+		       <&dma0
+			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+			 AT91_XDMAC_DT_PERID(32))>;
+		dma-names = "tx", "rx";
+		clocks = <&i2s0_clk>, <&i2s0_gclk>, <&audio_pll_pmc>, <&i2s0muxck>;
+		clock-names = "pclk", "gclk", "aclk", "muxclk";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2s0_default>;
+	};
-- 
2.17.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2018-05-29 14:59 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-25 12:34 [PATCH v4 0/7] ASoC: add driver for Atmel I2S controller Codrin Ciubotariu
2018-05-25 12:34 ` [PATCH v4 1/7] dt-bindings: clk: at91: add an I2S mux clock Codrin Ciubotariu
2018-05-31  0:58   ` Rob Herring
2018-05-31 10:25     ` Codrin Ciubotariu
2018-05-31 14:20       ` Rob Herring
2018-05-31 15:31         ` Stephen Boyd
2018-05-31 15:56           ` Rob Herring
2018-06-07 10:30             ` Codrin Ciubotariu
2018-06-12  8:06               ` Stephen Boyd
2018-05-31 16:01         ` Alexandre Belloni
2018-05-25 12:34 ` [PATCH v4 2/7] clk: at91: add I2S clock mux driver Codrin Ciubotariu
2018-05-31 15:26   ` Stephen Boyd
2018-06-04  8:20     ` Codrin Ciubotariu
2018-06-12 16:33       ` Stephen Boyd
2018-05-25 12:34 ` [PATCH v4 3/7] ARM: dts: at91: sama5d2: add I2S clock muxing nodes Codrin Ciubotariu
2018-05-25 12:34 ` [PATCH v4 4/7] ASoC: atmel-i2s: dt-bindings: add DT bindings for I2S controller Codrin Ciubotariu
2018-05-29 14:59   ` Mark Brown [this message]
2018-05-25 12:34 ` [PATCH v4 5/7] ASoC: atmel-i2s: add driver for the new Atmel " Codrin Ciubotariu
2018-05-29 14:59   ` Applied "ASoC: atmel-i2s: add driver for the new Atmel I2S controller" to the asoc tree Mark Brown
2018-05-25 12:34 ` [PATCH v4 6/7] ARM: dts: at91: sama5d2: add nodes for I2S controllers Codrin Ciubotariu
2018-05-25 12:34 ` [PATCH v4 7/7] ARM: dts: at91: sama5d2 Xplained: add pin muxing for I2S Codrin Ciubotariu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1fNg5a-0005qO-IW@debutante \
    --to=broonie@kernel.org \
    --cc=Cristian.Birsan@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=boris.brezillon@bootlin.com \
    --cc=codrin.ciubotariu@microchip.com \
    --cc=cyrille.pitchen@atmel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox