From: "Benoît Monin" <benoit.monin@bootlin.com>
To: Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>
Cc: "Brian Masney" <bmasney@redhat.com>,
"Thomas Petazzoni" <thomas.petazzoni@bootlin.com>,
"Vladimir Kondratiev" <vladimir.kondratiev@mobileye.com>,
"Gregory CLEMENT" <gregory.clement@bootlin.com>,
"Théo Lebrun" <theo.lebrun@bootlin.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] clk: eyeq: Support for Mobileye EyeQ7H for v7.3
Date: Fri, 24 Jul 2026 09:54:57 +0200 [thread overview]
Message-ID: <RcAweJqGSl27gSWWG_TpDg@bootlin.com> (raw)
Hi Stephen,
Here is a pull for the clk-eyeq driver adding support for Mobileye EyeQ7H
SoC. This pull request is a clean rebase of the version that was posted
during the last release cycle[1] and it was also posted as a patch series[2].
Alongside the changes to the clk-eyeq driver, this pull request also
provides the dt-bindings reviewed by Krzysztof Kozlowski, a change to the
reset-eyeq driver acked by Philipp Zabel and a small rework of the
fixed-factor clocks reviewed by Brian Masney.
[1]: https://lore.kernel.org/linux-clk/h_BA0KRKTGSANQ5Y4eqo6A@bootlin.com
[2]: https://patch.msgid.link/20260604-clk-eyeq7-v8-0-53f618174cf6@bootlin.com
The following changes since commit dc59e4fea9d83f03bad6bddf3fa2e52491777482:
Linux 7.2-rc1 (2026-06-28 12:01:31 -0700)
are available in the Git repository at:
https://github.com/benoitmonin/linux tags/clk-eyeq7h-7.3
for you to fetch changes up to 44af1b974949c8f2f7cca469c0c7eee481750309:
clk: eyeq: Add EyeQ7H compatibles (2026-07-17 10:09:56 +0200)
----------------------------------------------------------------
clk-eyeq: Add support for Mobileye EyeQ7H
This patchset brings the support of the Other Logic Blocks (OLB)
found in the first Mobileye SoC based on the RISC-V architecture, the
EyeQ7H. Despite the change from MIPS to RISC-V, the Other Logic Blocks
provide similar clock and reset functions to the controllers of the
chip. This series introduces the device tree bindings of the SoC and
the necessary changes to the clock and reset eyeq drivers.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
----------------------------------------------------------------
Benoît Monin (9):
dt-bindings: soc: mobileye: Add EyeQ7H OLB
reset: eyeq: Add EyeQ7H compatibles
clk: fixed-factor: Rework initialization with parent clocks
clk: fixed-factor: Export __clk_hw_register_fixed_factor()
clk: eyeq: Prefix the PLL registers with the PLL type
clk: eyeq: Introduce a generic clock type
clk: eyeq: Convert clocks declaration to eqc_clock
clk: eyeq: Drop PLL, dividers, and fixed factors structs
clk: eyeq: Add EyeQ7H compatibles
.../bindings/soc/mobileye/mobileye,eyeq7h-olb.yaml | 192 +++
drivers/clk/clk-eyeq.c | 1268 +++++++++++++-------
drivers/clk/clk-fixed-factor.c | 78 +-
drivers/reset/reset-eyeq.c | 271 ++++-
include/dt-bindings/clock/mobileye,eyeq7h-clk.h | 119 ++
include/linux/clk-provider.h | 56 +-
6 files changed, 1487 insertions(+), 497 deletions(-)
create mode 100644 Documentation/devicetree/bindings/soc/mobileye/mobileye,eyeq7h-olb.yaml
create mode 100644 include/dt-bindings/clock/mobileye,eyeq7h-clk.h
reply other threads:[~2026-07-24 7:55 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=RcAweJqGSl27gSWWG_TpDg@bootlin.com \
--to=benoit.monin@bootlin.com \
--cc=bmasney@redhat.com \
--cc=gregory.clement@bootlin.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
--cc=theo.lebrun@bootlin.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.kondratiev@mobileye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox