From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Stephen Boyd <swboyd@chromium.org>,
Michael Turquette <mturquette@baylibre.com>,
Taniya Das <tdas@codeaurora.org>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Krzysztof Wilczy??ski <kw@linux.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Prasad Malisetty <quic_pmaliset@quicinc.com>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
linux-pci@vger.kernel.org
Subject: Re: [RFC PATCH 4/5] PCI: qcom: Remove unnecessary pipe_clk handling
Date: Sun, 13 Mar 2022 12:06:38 -0500 [thread overview]
Message-ID: <Yi4knsfVrEmEEzKM@builder.lan> (raw)
In-Reply-To: <20220313000824.229405-5-dmitry.baryshkov@linaro.org>
On Sat 12 Mar 18:08 CST 2022, Dmitry Baryshkov wrote:
> QMP PHY driver already does clk_prepare_enable()/_disable() pipe_clk.
> Remove extra calls to enable/disable this clock from the PCIe driver, so
> that the PHY driver can manage the clock on its own.
>
> Fixes: aa9c0df98c29 ("PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280")
> Cc: Prasad Malisetty <quic_pmaliset@quicinc.com>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Regards,
Bjorn
> ---
> drivers/pci/controller/dwc/pcie-qcom.c | 50 ++------------------------
> 1 file changed, 3 insertions(+), 47 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 6ab90891801d..a6becafb6a77 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -128,7 +128,6 @@ struct qcom_pcie_resources_2_3_2 {
> struct clk *master_clk;
> struct clk *slave_clk;
> struct clk *cfg_clk;
> - struct clk *pipe_clk;
> struct regulator_bulk_data supplies[QCOM_PCIE_2_3_2_MAX_SUPPLY];
> };
>
> @@ -165,7 +164,6 @@ struct qcom_pcie_resources_2_7_0 {
> int num_clks;
> struct regulator_bulk_data supplies[2];
> struct reset_control *pci_reset;
> - struct clk *pipe_clk;
> struct clk *pipe_clk_src;
> struct clk *phy_pipe_clk;
> struct clk *ref_clk_src;
> @@ -597,8 +595,7 @@ static int qcom_pcie_get_resources_2_3_2(struct qcom_pcie *pcie)
> if (IS_ERR(res->slave_clk))
> return PTR_ERR(res->slave_clk);
>
> - res->pipe_clk = devm_clk_get(dev, "pipe");
> - return PTR_ERR_OR_ZERO(res->pipe_clk);
> + return 0;
> }
>
> static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
> @@ -613,13 +610,6 @@ static void qcom_pcie_deinit_2_3_2(struct qcom_pcie *pcie)
> regulator_bulk_disable(ARRAY_SIZE(res->supplies), res->supplies);
> }
>
> -static void qcom_pcie_post_deinit_2_3_2(struct qcom_pcie *pcie)
> -{
> - struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
> -
> - clk_disable_unprepare(res->pipe_clk);
> -}
> -
> static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
> {
> struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
> @@ -694,22 +684,6 @@ static int qcom_pcie_init_2_3_2(struct qcom_pcie *pcie)
> return ret;
> }
>
> -static int qcom_pcie_post_init_2_3_2(struct qcom_pcie *pcie)
> -{
> - struct qcom_pcie_resources_2_3_2 *res = &pcie->res.v2_3_2;
> - struct dw_pcie *pci = pcie->pci;
> - struct device *dev = pci->dev;
> - int ret;
> -
> - ret = clk_prepare_enable(res->pipe_clk);
> - if (ret) {
> - dev_err(dev, "cannot prepare/enable pipe clock\n");
> - return ret;
> - }
> -
> - return 0;
> -}
> -
> static int qcom_pcie_get_resources_2_4_0(struct qcom_pcie *pcie)
> {
> struct qcom_pcie_resources_2_4_0 *res = &pcie->res.v2_4_0;
> @@ -1198,8 +1172,7 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
> return PTR_ERR(res->ref_clk_src);
> }
>
> - res->pipe_clk = devm_clk_get(dev, "pipe");
> - return PTR_ERR_OR_ZERO(res->pipe_clk);
> + return 0;
> }
>
> static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
> @@ -1238,12 +1211,6 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
> goto err_disable_clocks;
> }
>
> - ret = clk_prepare_enable(res->pipe_clk);
> - if (ret) {
> - dev_err(dev, "cannot prepare/enable pipe clock\n");
> - goto err_disable_clocks;
> - }
> -
> /* Wait for reset to complete, required on SM8450 */
> usleep_range(1000, 1500);
>
> @@ -1298,14 +1265,7 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie)
> if (pcie->cfg->pipe_clk_need_muxing)
> clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk);
>
> - return clk_prepare_enable(res->pipe_clk);
> -}
> -
> -static void qcom_pcie_post_deinit_2_7_0(struct qcom_pcie *pcie)
> -{
> - struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0;
> -
> - clk_disable_unprepare(res->pipe_clk);
> + return 0;
> }
>
> static int qcom_pcie_link_up(struct dw_pcie *pci)
> @@ -1455,9 +1415,7 @@ static const struct qcom_pcie_ops ops_1_0_0 = {
> static const struct qcom_pcie_ops ops_2_3_2 = {
> .get_resources = qcom_pcie_get_resources_2_3_2,
> .init = qcom_pcie_init_2_3_2,
> - .post_init = qcom_pcie_post_init_2_3_2,
> .deinit = qcom_pcie_deinit_2_3_2,
> - .post_deinit = qcom_pcie_post_deinit_2_3_2,
> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> };
>
> @@ -1484,7 +1442,6 @@ static const struct qcom_pcie_ops ops_2_7_0 = {
> .deinit = qcom_pcie_deinit_2_7_0,
> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> .post_init = qcom_pcie_post_init_2_7_0,
> - .post_deinit = qcom_pcie_post_deinit_2_7_0,
> };
>
> /* Qcom IP rev.: 1.9.0 */
> @@ -1494,7 +1451,6 @@ static const struct qcom_pcie_ops ops_1_9_0 = {
> .deinit = qcom_pcie_deinit_2_7_0,
> .ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
> .post_init = qcom_pcie_post_init_2_7_0,
> - .post_deinit = qcom_pcie_post_deinit_2_7_0,
> .config_sid = qcom_pcie_config_sid_sm8250,
> };
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2022-03-13 17:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-13 0:08 [RFC PATCH 0/5] PCI: qcom: rework pipe_clk/pipe_clk_src handling Dmitry Baryshkov
2022-03-13 0:08 ` [RFC PATCH 1/5] clk: qcom: regmap-mux: add pipe clk implementation Dmitry Baryshkov
2022-03-13 17:14 ` Bjorn Andersson
2022-03-13 0:08 ` [RFC PATCH 2/5] clk: qcom: gcc-sm8450: use new clk_regmap_mux_safe_ops for PCIe pipe clocks Dmitry Baryshkov
2022-03-13 17:08 ` Bjorn Andersson
2022-03-13 0:08 ` [RFC PATCH 3/5] clk: qcom: gcc-sc7280: " Dmitry Baryshkov
2022-03-13 17:08 ` Bjorn Andersson
2022-03-16 0:07 ` Stephen Boyd
2022-03-13 0:08 ` [RFC PATCH 4/5] PCI: qcom: Remove unnecessary pipe_clk handling Dmitry Baryshkov
2022-03-13 17:06 ` Bjorn Andersson [this message]
2022-03-13 0:08 ` [RFC PATCH 5/5] PCI: qcom: Drop manual pipe_clk_src handling Dmitry Baryshkov
2022-03-13 17:07 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Yi4knsfVrEmEEzKM@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=dmitry.baryshkov@linaro.org \
--cc=kw@linux.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mturquette@baylibre.com \
--cc=quic_pmaliset@quicinc.com \
--cc=swboyd@chromium.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).