From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Robert Foss <robert.foss@linaro.org>
Cc: agross@kernel.org, mturquette@baylibre.com, sboyd@kernel.org,
robh+dt@kernel.org, krzk+dt@kernel.org, jonathan@marek.ca,
tdas@codeaurora.org, anischal@codeaurora.org,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Subject: Re: [PATCH v2 2/8] clk: Introduce CLK_ASSUME_ENABLED_WHEN_UNUSED
Date: Tue, 3 May 2022 10:02:51 -0500 [thread overview]
Message-ID: <YnFEGzTQMsNpczai@builder.lan> (raw)
In-Reply-To: <20220503130448.520470-2-robert.foss@linaro.org>
On Tue 03 May 08:04 CDT 2022, Robert Foss wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Some clock implementations doesn't provide means of implementing
> is_enabled(), but still requires to be explicitly disabled when found
> unused as part of clk_disable_unused().
>
> One such set of clocks are Qualcomm's display RCGs. These can be enabled
> and disabled automatically by the hardware, so it's not possible to
> reliably query their configuration. Further more, these clocks need to
> be disabled when unused, to allow them to be "parked" onto a safe
> parent. Failure to disable the RCG results in the hardware locking up as
> clk_disable_unused() traverses up the tree and turns off its source
> clocks.
>
> Add a new flag, CLK_ASSUME_ENABLED_BOOT, which clock drivers can use to
> signal that these clocks should be disabled even if they don't implement
> the is_enabled() ops.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> ---
>
I discussed this with Stephen a while ago and we agreed that in a
sufficiently complex system with kernel modules booting without
clk_ignore_unused simply isn't supported.
We will have to design something better. So please drop this patch from
the series.
Regards,
Bjorn
> Changes since v1
> - Removed Vinods r-b
>
>
> drivers/clk/clk.c | 2 +-
> include/linux/clk-provider.h | 2 ++
> 2 files changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
> index ed119182aa1b..9789ec137219 100644
> --- a/drivers/clk/clk.c
> +++ b/drivers/clk/clk.c
> @@ -1284,7 +1284,7 @@ static void __init clk_disable_unused_subtree(struct clk_core *core)
> * sequence. call .disable_unused if available, otherwise fall
> * back to .disable
> */
> - if (clk_core_is_enabled(core)) {
> + if (clk_core_is_enabled(core) || core->flags & CLK_ASSUME_ENABLED_WHEN_UNUSED) {
> trace_clk_disable(core);
> if (core->ops->disable_unused)
> core->ops->disable_unused(core->hw);
> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
> index c10dc4c659e2..9038022ffebd 100644
> --- a/include/linux/clk-provider.h
> +++ b/include/linux/clk-provider.h
> @@ -32,6 +32,8 @@
> #define CLK_OPS_PARENT_ENABLE BIT(12)
> /* duty cycle call may be forwarded to the parent clock */
> #define CLK_DUTY_CYCLE_PARENT BIT(13)
> +/* assume clock is enabled if found unused in late init */
> +#define CLK_ASSUME_ENABLED_WHEN_UNUSED BIT(14)
>
> struct clk;
> struct clk_hw;
> --
> 2.34.1
>
next prev parent reply other threads:[~2022-05-03 15:03 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-03 13:04 [PATCH v2 1/8] clk: qcom: rcg2: Cache rate changes for parked RCGs Robert Foss
2022-05-03 13:04 ` [PATCH v2 2/8] clk: Introduce CLK_ASSUME_ENABLED_WHEN_UNUSED Robert Foss
2022-05-03 15:02 ` Bjorn Andersson [this message]
2022-05-03 16:23 ` Robert Foss
2022-05-03 13:04 ` [PATCH v2 3/8] clk: qcom: sm8250-dispcc: Flag shared RCGs as assumed enable Robert Foss
2022-05-03 13:04 ` [PATCH v2 4/8] clk: qcom: add support for SM8350 GPUCC Robert Foss
2022-05-03 17:21 ` Bjorn Andersson
2022-05-03 20:39 ` Jonathan Marek
2022-05-04 12:24 ` Robert Foss
2022-05-03 13:04 ` [PATCH v2 5/8] dt-bindings: clock: Add Qcom SM8350 GPUCC bindings Robert Foss
2022-05-03 17:24 ` Bjorn Andersson
2022-05-03 13:04 ` [PATCH v2 6/8] clk: qcom: add support for SM8350 DISPCC Robert Foss
2022-05-03 17:25 ` Bjorn Andersson
2022-05-03 17:47 ` Robert Foss
2022-05-03 13:04 ` [PATCH v2 7/8] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings Robert Foss
2022-05-03 17:26 ` Bjorn Andersson
2022-05-03 17:47 ` Robert Foss
2022-05-03 13:04 ` [PATCH v2 8/8] arm64: dts: qcom: sm8350: Add DISPCC node Robert Foss
2022-05-03 17:27 ` Bjorn Andersson
2022-05-03 15:01 ` [PATCH v2 1/8] clk: qcom: rcg2: Cache rate changes for parked RCGs Bjorn Andersson
2022-05-03 16:23 ` Robert Foss
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YnFEGzTQMsNpczai@builder.lan \
--to=bjorn.andersson@linaro.org \
--cc=agross@kernel.org \
--cc=anischal@codeaurora.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=jonathan@marek.ca \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robert.foss@linaro.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=tdas@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).