Re: [PATCH v3 0/6] mips: dts: ralink: update system controller nodes and its consumers

[Thomas Bogendoerfer <tsbogend@alpha.franken.de>]

On Mon, Jan 20, 2025 at 10:21:40AM +0100, Sergio Paracuellos wrote:
> Hi all!
> 
> Ralinks SoCs have a system controller node which serves as clock and reset
> providers for the rest of the world. This patch series introduces clock
> definitions for these SoCs. The clocks are registered in the driver using
> a bunch of arrays in specific order so these definitions represent the assigned
> identifier that is used when this happens so client nodes can easily use it
> to specify the clock which they consume without the need of checking driver code.
> 
> DTS files which are currently on tree are not matching system controller
> bindings. So all of them are updated to properly match them.
> 
> I'd like this series to go through kernel mips git tree if possible.
> 
> Thanks in advance for your time.
> 
> Changes in v3:
> - Address Krzysztof comments in v2 (Thanks!):
>   + Drop reset include file since what it was defined there were hardware
>     constants and no binding related indexes at all.
>   + Update patches for not referring to this reset removed file.
> 
> Changes in v2:
> - Redo commit messages in all the patches in the series to clarify why the changes
>   are needed asked by Krzysztof in v1.
>   
> v2 of this series:
> - https://lore.kernel.org/linux-clk/20250119154447.462857-1-sergio.paracuellos@gmail.com/T/#t 
> 
> v1 of this series:
> - https://lore.kernel.org/linux-clk/20250115153019.407646-1-sergio.paracuellos@gmail.com/T/#t
> 
> Best regards,
>     Sergio Paracuellos
> 
> Sergio Paracuellos (6):
>   dt-bindings: clock: add clock definitions for Ralink SoCs
>   mips: dts: ralink: rt2880: update system controller node and its
>     consumers
>   mips: dts: ralink: rt3050: update system controller node and its
>     consumers
>   mips: dts: ralink: rt3883: update system controller node and its
>     consumers
>   mips: dts: ralink: mt7620a: update system controller node and its
>     consumers
>   mips: dts: ralink: mt7628a: update system controller node and its
>     consumers
> 
>  .../bindings/clock/mediatek,mtmips-sysc.yaml  |  11 +-
>  arch/mips/boot/dts/ralink/mt7620a.dtsi        |  10 +-
>  arch/mips/boot/dts/ralink/mt7628a.dtsi        |  38 +++--
>  arch/mips/boot/dts/ralink/rt2880.dtsi         |  10 +-
>  arch/mips/boot/dts/ralink/rt3050.dtsi         |  10 +-
>  arch/mips/boot/dts/ralink/rt3883.dtsi         |  10 +-
>  .../dt-bindings/clock/mediatek,mtmips-sysc.h  | 130 ++++++++++++++++++
>  7 files changed, 196 insertions(+), 23 deletions(-)
>  create mode 100644 include/dt-bindings/clock/mediatek,mtmips-sysc.h

applied patches 1-5 to mips-next

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]