Linux clock framework development
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: Renjiang Han <quic_renjiang@quicinc.com>,
	Bjorn Andersson <andersson@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Stanimir Varbanov <stanimir.k.varbanov@gmail.com>,
	Vikash Garodia <quic_vgarodia@quicinc.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-media@vger.kernel.org
Subject: Re: [PATCH v4 1/2] venus: pm_helpers: add compatibility for dev_pm_genpd_set_hwmode on V4
Date: Tue, 18 Mar 2025 22:11:26 +0000	[thread overview]
Message-ID: <b5f4ea78-4a38-4e89-8808-76658f216a90@linaro.org> (raw)
In-Reply-To: <20250218-switch_gdsc_mode-v4-1-546f6c925ae0@quicinc.com>

On 18/02/2025 10:33, Renjiang Han wrote:
> There are two ways to switch GDSC mode. One is to write the POWER_CONTROL
> register and the other is to use dev_pm_genpd_set_hwmode(). However, they
> rely on different clock driver flags. dev_pm_genpd_set_hwmode() depends on
> the HW_CTRL_TRIGGER flag and POWER_CONTROL register depends on the HW_CTRL
> flag.
> 
> By default, the dev_pm_genpd_set_hwmode() is used to switch the GDSC mode.
> If it fails and dev_pm_genpd_set_hwmode() returns -EOPNOTSUPP, it means
> that the clock driver uses the HW_CTRL flag. At this time, the GDSC mode
> is switched to write the POWER_CONTROL register.
> 
> Clock driver is using HW_CTRL_TRIGGER flag with V6. So hwmode_dev is
> always true on using V6 platform. Conversely, if hwmode_dev is false, this
> platform must be not using V6. Therefore, replace IS_V6 in poweroff_coreid
> with hwmode_dev. Also, with HW_CTRL_TRIGGER flag, the vcodec gdsc gets
> enabled in SW mode by default. Therefore, before disabling the GDSC, GDSC
> should be switched to SW mode so that GDSC gets enabled in SW mode in the
> next enable.
> 
> Signed-off-by: Renjiang Han <quic_renjiang@quicinc.com>
> ---
>   drivers/media/platform/qcom/venus/core.h       |  2 ++
>   drivers/media/platform/qcom/venus/pm_helpers.c | 38 ++++++++++++++------------
>   2 files changed, 23 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/media/platform/qcom/venus/core.h b/drivers/media/platform/qcom/venus/core.h
> index 43532543292280be15adf688fc0c30f44e207c7f..0ccce89d3f54cf685ecce5b339a51e44f6ea3704 100644
> --- a/drivers/media/platform/qcom/venus/core.h
> +++ b/drivers/media/platform/qcom/venus/core.h
> @@ -168,6 +168,7 @@ struct venus_format {
>    * @root:	debugfs root directory
>    * @venus_ver:	the venus firmware version
>    * @dump_core:	a flag indicating that a core dump is required
> + * @hwmode_dev:	a flag indicating that HW_CTRL_TRIGGER is used in clock driver
>    */
>   struct venus_core {
>   	void __iomem *base;
> @@ -230,6 +231,7 @@ struct venus_core {
>   		u32 rev;
>   	} venus_ver;
>   	unsigned long dump_core;
> +	bool hwmode_dev;
>   };
>   
>   struct vdec_controls {
> diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
> index 33a5a659c0ada0ca97eebb5522c5f349f95c49c7..409aa9bd0b5d099c993eedb03177ec5ed918b4a0 100644
> --- a/drivers/media/platform/qcom/venus/pm_helpers.c
> +++ b/drivers/media/platform/qcom/venus/pm_helpers.c
> @@ -412,9 +412,17 @@ static int vcodec_control_v4(struct venus_core *core, u32 coreid, bool enable)
>   	u32 val;
>   	int ret;
>   
> -	if (IS_V6(core))
> -		return dev_pm_genpd_set_hwmode(core->pmdomains->pd_devs[coreid], !enable);
> -	else if (coreid == VIDC_CORE_ID_1) {
> +	ret = dev_pm_genpd_set_hwmode(core->pmdomains->pd_devs[coreid], !enable);
> +	if (ret == -EOPNOTSUPP) {
> +		core->hwmode_dev = false;
> +		goto legacy;
> +	}
> +
> +	core->hwmode_dev = true;
> +	return ret;
> +
> +legacy:
> +	if (coreid == VIDC_CORE_ID_1) {
>   		ctrl = core->wrapper_base + WRAPPER_VCODEC0_MMCC_POWER_CONTROL;
>   		stat = core->wrapper_base + WRAPPER_VCODEC0_MMCC_POWER_STATUS;
>   	} else {
> @@ -450,7 +458,7 @@ static int poweroff_coreid(struct venus_core *core, unsigned int coreid_mask)
>   
>   		vcodec_clks_disable(core, core->vcodec0_clks);
>   
> -		if (!IS_V6(core)) {
> +		if (!core->hwmode_dev) {
>   			ret = vcodec_control_v4(core, VIDC_CORE_ID_1, false);
>   			if (ret)
>   				return ret;
> @@ -468,7 +476,7 @@ static int poweroff_coreid(struct venus_core *core, unsigned int coreid_mask)
>   
>   		vcodec_clks_disable(core, core->vcodec1_clks);
>   
> -		if (!IS_V6(core)) {
> +		if (!core->hwmode_dev) {
>   			ret = vcodec_control_v4(core, VIDC_CORE_ID_2, false);
>   			if (ret)
>   				return ret;
> @@ -491,11 +499,9 @@ static int poweron_coreid(struct venus_core *core, unsigned int coreid_mask)
>   		if (ret < 0)
>   			return ret;
>   
> -		if (!IS_V6(core)) {
> -			ret = vcodec_control_v4(core, VIDC_CORE_ID_1, true);
> -			if (ret)
> -				return ret;
> -		}
> +		ret = vcodec_control_v4(core, VIDC_CORE_ID_1, true);
> +		if (ret)
> +			return ret;
>   
>   		ret = vcodec_clks_enable(core, core->vcodec0_clks);
>   		if (ret)
> @@ -511,11 +517,9 @@ static int poweron_coreid(struct venus_core *core, unsigned int coreid_mask)
>   		if (ret < 0)
>   			return ret;
>   
> -		if (!IS_V6(core)) {
> -			ret = vcodec_control_v4(core, VIDC_CORE_ID_2, true);
> -			if (ret)
> -				return ret;
> -		}
> +		ret = vcodec_control_v4(core, VIDC_CORE_ID_2, true);
> +		if (ret)
> +			return ret;
>   
>   		ret = vcodec_clks_enable(core, core->vcodec1_clks);
>   		if (ret)
> @@ -811,7 +815,7 @@ static int vdec_power_v4(struct device *dev, int on)
>   	else
>   		vcodec_clks_disable(core, core->vcodec0_clks);
>   
> -	vcodec_control_v4(core, VIDC_CORE_ID_1, false);
> +	ret = vcodec_control_v4(core, VIDC_CORE_ID_1, false);
>   
>   	return ret;
>   }
> @@ -856,7 +860,7 @@ static int venc_power_v4(struct device *dev, int on)
>   	else
>   		vcodec_clks_disable(core, core->vcodec1_clks);
>   
> -	vcodec_control_v4(core, VIDC_CORE_ID_2, false);
> +	ret = vcodec_control_v4(core, VIDC_CORE_ID_2, false);
>   
>   	return ret;
>   }
> 

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

  parent reply	other threads:[~2025-03-18 22:11 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-18 10:33 [PATCH v4 0/2] Use APIs in gdsc genpd to switch gdsc mode for venus v4 core Renjiang Han
2025-02-18 10:33 ` [PATCH v4 1/2] venus: pm_helpers: add compatibility for dev_pm_genpd_set_hwmode on V4 Renjiang Han
2025-03-18  7:21   ` Vikash Garodia
2025-03-18 22:11   ` Bryan O'Donoghue [this message]
2025-05-28 19:27   ` Dmitry Baryshkov
2025-05-29  2:03     ` Renjiang Han
2025-02-18 10:33 ` [PATCH v4 2/2] clk: qcom: videocc: Use HW_CTRL_TRIGGER flag for video GDSC's Renjiang Han
2025-03-18 22:11   ` Bryan O'Donoghue
2025-05-26  8:26     ` Renjiang Han
2025-05-28 19:30       ` Dmitry Baryshkov
2025-05-29  1:53         ` Renjiang Han
2025-05-29  5:48           ` Vikash Garodia
2025-03-04 10:49 ` [PATCH v4 0/2] Use APIs in gdsc genpd to switch gdsc mode for venus v4 core Renjiang Han

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b5f4ea78-4a38-4e89-8808-76658f216a90@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=andersson@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=quic_renjiang@quicinc.com \
    --cc=quic_vgarodia@quicinc.com \
    --cc=sboyd@kernel.org \
    --cc=stanimir.k.varbanov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox