From: Jon Hunter <jonathanh@nvidia.com>
To: Dmitry Osipenko <digetx@gmail.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>,
Prashant Gaikwad <pgaikwad@nvidia.com>,
"Michael Turquette" <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Thierry Reding <thierry.reding@gmail.com>
Cc: <linux-clk@vger.kernel.org>, <linux-tegra@vger.kernel.org>
Subject: Re: [PATCH] clk: tegra: Mark APB clock as critical
Date: Thu, 30 Nov 2017 17:22:34 +0000 [thread overview]
Message-ID: <e73fb625-58bc-8ccf-4c71-00b457da6a05@nvidia.com> (raw)
In-Reply-To: <6378f92d-54a9-590a-5fdb-88a7bfa96fc1@gmail.com>
On 30/11/17 16:53, Dmitry Osipenko wrote:
...
>>> Could you please show the /sys/kernel/debug/clk/clk_summary?
>>
>> With what patches present?
>>
> linux-next without any additional patches
Here you go. This is from Tegra124 Jetson TK1 ...
clock enable_cnt prepare_cnt rate accuracy phase
----------------------------------------------------------------------------------------
dfllCPU_out 2 2 1326000000 0 0
cclk_g 1 1 1326000000 0 0
clock 0 0 32768 0 0
vimclk_sync 0 0 24000000 0 0
i2s4_sync 0 0 24000000 0 0
i2s3_sync 0 0 24000000 0 0
i2s2_sync 0 0 24000000 0 0
i2s1_sync 0 0 24000000 0 0
i2s0_sync 0 0 24000000 0 0
spdif_in_sync 0 0 24000000 0 0
spdif_mux 0 0 24000000 0 0
spdif 0 0 24000000 0 0
spdif_doubler 0 0 48000000 0 0
spdif_div 0 0 48000000 0 0
spdif_2x 0 0 48000000 0 0
audio4_mux 0 0 24000000 0 0
audio4 0 0 24000000 0 0
audio4_doubler 0 0 48000000 0 0
audio4_div 0 0 48000000 0 0
audio4_2x 0 0 48000000 0 0
audio3_mux 0 0 24000000 0 0
audio3 0 0 24000000 0 0
audio3_doubler 0 0 48000000 0 0
audio3_div 0 0 48000000 0 0
audio3_2x 0 0 48000000 0 0
audio2_mux 0 0 24000000 0 0
audio2 0 0 24000000 0 0
audio2_doubler 0 0 48000000 0 0
audio2_div 0 0 48000000 0 0
audio2_2x 0 0 48000000 0 0
audio1_mux 0 0 24000000 0 0
audio1 0 0 24000000 0 0
audio1_doubler 0 0 48000000 0 0
audio1_div 0 0 48000000 0 0
audio1_2x 0 0 48000000 0 0
audio0_mux 0 0 24000000 0 0
audio0 0 0 24000000 0 0
audio0_doubler 0 0 48000000 0 0
audio0_div 0 0 48000000 0 0
audio0_2x 0 0 48000000 0 0
clk_32k 1 1 32768 0 0
blink_override 0 0 32768 0 0
blink 0 0 32768 0 0
kbc 0 0 32768 0 0
rtc 2 2 32768 0 0
osc 2 2 12000000 0 0
pll_ref 5 5 12000000 0 0
pll_x 0 0 696000000 0 0
pll_x_out0 0 0 348000000 0 0
gpu 0 0 12000000 0 0
pll_p 16 16 408000000 0 0
hda2codec_2x 1 1 48000000 0 0
hda 1 1 102000000 0 0
sata_oob 1 1 204000000 0 0
sata 2 2 102000000 0 0
sbc4 1 1 19902440 0 0
dfll_ref 2 2 51000000 0 0
dfll_soc 2 2 51000000 0 0
dsiblp 0 0 68000000 0 0
dsialp 0 0 68000000 0 0
host1x 2 2 136000000 0 0
vde 0 0 408000000 0 0
uartc 0 0 408000000 0 0
uartb 0 0 408000000 0 0
uarta 0 0 408000000 0 0
uartd 1 1 408000000 0 0
csite 1 1 204000000 0 0
soc_therm 0 0 51000000 0 0
sdmmc4 1 1 51000000 0 0
sdmmc3 1 1 48000000 0 0
spdif_in 0 0 408000000 0 0
mselect 2 2 102000000 0 0
afi 1 1 102000000 0 0
se 0 0 102000000 0 0
i2c5 1 2 81600000 0 0
pll_p_out5_div 0 0 408000000 0 0
pll_p_out5 0 0 408000000 0 0
pll_p_out4_div 0 0 204000000 0 0
pll_p_out4 0 0 204000000 0 0
pll_p_out3_div 0 0 102000000 0 0
pll_p_out3 0 0 102000000 0 0
csi 0 0 102000000 0 0
clk72mhz 0 0 102000000 0 0
mipi-cal 0 0 102000000 0 0
hdmi_audio 0 0 102000000 0 0
pll_p_out2_div 1 1 102000000 0 0
pll_p_out2 1 1 102000000 0 0
sclk 2 2 102000000 0 0
hclk_div 1 1 51000000 0 0
hclk 1 1 51000000 0 0
pclk_div 1 1 51000000 0 0
pclk 2 2 51000000 0 0
apbdma 1 1 51000000 0 0
cec 0 0 51000000 0 0
pll_p_out1_div 1 1 9600000 0 0
pll_p_out1 1 1 9600000 0 0
pll_a 2 2 282240000 0 0
pll_a_out0_div 1 1 11289600 0 0
pll_a_out0 2 2 11289600 0 0
i2s4 0 0 11289600 0 0
i2s3 0 0 11289600 0 0
i2s2 0 0 11289600 0 0
i2s1 0 0 11289600 0 0
i2s0 0 0 11289600 0 0
extern1 2 2 11289600 0 0
clk_out_1_mux 2 2 11289600 0 0
clk_out_1 1 1 11289600 0 0
dpaux 0 0 24000000 0 0
pll_d2 1 1 296000000 0 0
pll_d2_out0 2 2 296000000 0 0
disp1 1 1 296000000 0 0
hdmi 1 1 296000000 0 0
pll_dp 0 0 18750000 0 0
pll_c4 0 0 18750000 0 0
pll_e 4 4 100000000 0 0
cml1 1 1 100000000 0 0
cml0 1 1 100000000 0 0
pll_re_vco 0 0 672000000 0 0
pll_re_out 0 0 672000000 0 0
xusb_host_src 0 0 112000000 0 0
xusb_host 0 0 112000000 0 0
xusb_falcon_src 0 0 224000000 0 0
pll_d 0 0 925000000 0 0
pll_d_out0 0 0 462500000 0 0
pll_d_dsi_out 0 0 462500000 0 0
dsib 0 0 462500000 0 0
dsia 0 0 462500000 0 0
pll_u 3 3 480000000 0 0
pll_u_12M 0 0 12000000 0 0
pll_u_48M 0 0 48000000 0 0
xusb_fs_src 0 0 48000000 0 0
pll_u_60M 0 0 60000000 0 0
xusb_hs_src 0 0 60000000 0 0
pll_u_480M 0 0 480000000 0 0
xusb_ss_src 0 0 120000000 0 0
xusb_ss 0 0 120000000 0 0
xusb_ss_div2 0 0 60000000 0 0
pll_m 1 1 924000000 0 0
isp 0 0 924000000 0 0
ispb 0 0 924000000 0 0
vi_sensor 0 0 924000000 0 0
vi_sensor2 0 0 924000000 0 0
vic03 0 0 924000000 0 0
vi 0 0 924000000 0 0
pll_m_ud 1 1 924000000 0 0
emc 1 1 924000000 0 0
mc 0 0 462000000 0 0
pll_m_out1_div 0 0 924000000 0 0
pll_m_out1 0 0 924000000 0 0
pll_c3 0 0 300000000 0 0
msenc 0 0 300000000 0 0
tsec 0 0 300000000 0 0
pll_c2 0 0 300000000 0 0
pll_c 0 0 768000000 0 0
pll_c_ud 0 0 768000000 0 0
pll_c_out1_div 0 0 96000000 0 0
pll_c_out1 0 0 96000000 0 0
clk_m 6 10 12000000 0 0
tsensor 0 0 400000 0 0
cclk_lp 0 0 12000000 0 0
clk_out_3_mux 0 0 12000000 0 0
clk_out_3 0 0 12000000 0 0
clk_out_2_mux 0 0 12000000 0 0
clk_out_2 0 0 12000000 0 0
pcie 1 1 12000000 0 0
vim2_clk 0 0 12000000 0 0
sata_cold 0 0 12000000 0 0
dtv 0 0 12000000 0 0
dp2 0 0 12000000 0 0
dds 0 0 12000000 0 0
csus 0 0 12000000 0 0
usb3 1 1 12000000 0 0
usb2 1 1 12000000 0 0
usbd 1 1 12000000 0 0
bsev 0 0 12000000 0 0
bsea 0 0 12000000 0 0
hda2hdmi 1 1 12000000 0 0
apbif 0 0 12000000 0 0
kfuse 0 0 12000000 0 0
fuse_burn 0 0 12000000 0 0
fuse 0 0 12000000 0 0
vcp 0 0 12000000 0 0
timer 2 2 12000000 0 0
xusb_dev_src 0 0 12000000 0 0
xusb_dev 0 0 12000000 0 0
sor0 0 0 12000000 0 0
disp2 0 0 12000000 0 0
sor0_lvds 0 0 12000000 0 0
entropy 0 0 12000000 0 0
extern3 0 0 12000000 0 0
extern2 0 0 12000000 0 0
sdmmc2 0 0 12000000 0 0
sdmmc1 0 0 12000000 0 0
amx1 0 0 12000000 0 0
adx1 0 0 12000000 0 0
sbc6 0 0 12000000 0 0
sbc5 0 0 12000000 0 0
sbc3 0 0 12000000 0 0
sbc2 0 0 12000000 0 0
sbc1 0 0 12000000 0 0
i2cslow 0 0 12000000 0 0
actmon 0 0 12000000 0 0
cile 0 0 12000000 0 0
cilcd 0 0 12000000 0 0
cilab 0 0 12000000 0 0
mipi 0 0 12000000 0 0
nor 0 0 12000000 0 0
owr 0 0 12000000 0 0
trace 0 0 12000000 0 0
la 0 0 12000000 0 0
vfir 0 0 12000000 0 0
amx 0 0 12000000 0 0
adx 0 0 12000000 0 0
pwm 0 0 12000000 0 0
spdif_out 0 0 12000000 0 0
i2c6 0 0 12000000 0 0
i2c4 0 1 12000000 0 0
i2c3 0 1 12000000 0 0
i2c2 0 1 12000000 0 0
i2c1 0 1 12000000 0 0
dam2 0 0 12000000 0 0
dam1 0 0 12000000 0 0
dam0 0 0 12000000 0 0
d_audio 0 0 12000000 0 0
clk_m_div4 0 0 3000000 0 0
clk_m_div2 0 0 6000000 0 0
--
nvpublic
next prev parent reply other threads:[~2017-11-30 17:22 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-10-23 11:12 [PATCH] clk: tegra: Mark APB clock as critical Jon Hunter 2017-10-23 11:57 ` Peter De Schrijver 2017-11-28 23:30 ` Dmitry Osipenko 2017-11-29 0:09 ` Dmitry Osipenko 2017-11-29 10:12 ` Jon Hunter 2017-11-29 15:08 ` Dmitry Osipenko 2017-11-29 22:55 ` Jon Hunter 2017-11-29 23:13 ` Dmitry Osipenko 2017-11-30 11:31 ` Jon Hunter 2017-11-30 13:24 ` Dmitry Osipenko 2017-11-30 16:39 ` Jon Hunter 2017-11-30 16:45 ` Dmitry Osipenko 2017-11-30 16:51 ` Jon Hunter 2017-11-30 16:53 ` Dmitry Osipenko 2017-11-30 17:22 ` Jon Hunter [this message] 2017-11-30 17:49 ` Dmitry Osipenko 2017-12-01 8:48 ` Peter De Schrijver 2017-12-02 12:47 ` Dmitry Osipenko 2017-12-05 9:06 ` Peter De Schrijver 2017-12-05 18:22 ` Dmitry Osipenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e73fb625-58bc-8ccf-4c71-00b457da6a05@nvidia.com \
--to=jonathanh@nvidia.com \
--cc=digetx@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=sboyd@codeaurora.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox