From: Taniya Das <tdas@codeaurora.org>
To: Douglas Anderson <dianders@chromium.org>,
sboyd@kernel.org, andy.gross@linaro.org
Cc: grahamr@codeaurora.org, girishm@codeaurora.org,
anischal@codeaurora.org, bjorn.andersson@linaro.org,
Michael Turquette <mturquette@baylibre.com>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
David Brown <david.brown@linaro.org>,
linux-soc@vger.kernel.org, linux-clk@vger.kernel.org
Subject: Re: [PATCH v2 2/2] clk: qcom: Add qspi (Quad SPI) clocks for sdm845
Date: Tue, 24 Jul 2018 07:52:16 +0530 [thread overview]
Message-ID: <f4f92dcd-7a63-f9de-a7a0-c403672d5c6c@codeaurora.org> (raw)
In-Reply-To: <20180723215404.74296-3-dianders@chromium.org>
On 7/24/2018 3:24 AM, Douglas Anderson wrote:
> Add both the interface and core clock.
>
> Signed-off-by: Douglas Anderson <dianders@chromium.org>
> ---
>
> Changes in v2:
> - Only 19.2, 100, 150, and 300 MHz now.
> - All clocks come from MAIN rather than EVEN.
> - Use parent map 0 instead of new parent map 9.
>
> drivers/clk/qcom/gcc-sdm845.c | 63 +++++++++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/drivers/clk/qcom/gcc-sdm845.c b/drivers/clk/qcom/gcc-sdm845.c
> index 0f694ed4238a..5bca634e277a 100644
> --- a/drivers/clk/qcom/gcc-sdm845.c
> +++ b/drivers/clk/qcom/gcc-sdm845.c
> @@ -162,6 +162,13 @@ static const char * const gcc_parent_names_10[] = {
> "core_bi_pll_test_se",
> };
>
> +static const char * const gcc_parent_names_9[] = {
> + "bi_tcxo",
> + "gpll0",
> + "gpll0_out_even",
> + "core_pi_sleep_clk",
> +};
> +
Please remove this.
> static struct clk_alpha_pll gpll0 = {
> .offset = 0x0,
> .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_FABIA],
> @@ -358,6 +365,28 @@ static struct clk_rcg2 gcc_pcie_phy_refgen_clk_src = {
> },
> };
>
> +static const struct freq_tbl ftbl_gcc_qspi_core_clk_src[] = {
> + F(19200000, P_BI_TCXO, 1, 0, 0),
> + F(100000000, P_GPLL0_OUT_MAIN, 6, 0, 0),
> + F(150000000, P_GPLL0_OUT_MAIN, 4, 0, 0),
> + F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
> + { }
> +};
> +
> +static struct clk_rcg2 gcc_qspi_core_clk_src = {
> + .cmd_rcgr = 0x4b008,
> + .mnd_width = 0,
> + .hid_width = 5,
> + .parent_map = gcc_parent_map_0,
> + .freq_tbl = ftbl_gcc_qspi_core_clk_src,
> + .clkr.hw.init = &(struct clk_init_data){
> + .name = "gcc_qspi_core_clk_src",
> + .parent_names = gcc_parent_names_9,
This would point to "gcc_parent_names_0".
> + .num_parents = 4,
> + .ops = &clk_rcg2_floor_ops,
> + },
> +};
> +
> static const struct freq_tbl ftbl_gcc_pdm2_clk_src[] = {
> F(9600000, P_BI_TCXO, 2, 0, 0),
> F(19200000, P_BI_TCXO, 1, 0, 0),
> @@ -1935,6 +1964,37 @@ static struct clk_branch gcc_qmip_video_ahb_clk = {
> },
> };
>
> +static struct clk_branch gcc_qspi_cnoc_periph_ahb_clk = {
> + .halt_reg = 0x4b000,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0x4b000,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_qspi_cnoc_periph_ahb_clk",
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> +static struct clk_branch gcc_qspi_core_clk = {
> + .halt_reg = 0x4b004,
> + .halt_check = BRANCH_HALT,
> + .clkr = {
> + .enable_reg = 0x4b004,
> + .enable_mask = BIT(0),
> + .hw.init = &(struct clk_init_data){
> + .name = "gcc_qspi_core_clk",
> + .parent_names = (const char *[]){
> + "gcc_qspi_core_clk_src",
> + },
> + .num_parents = 1,
> + .flags = CLK_SET_RATE_PARENT,
> + .ops = &clk_branch2_ops,
> + },
> + },
> +};
> +
> static struct clk_branch gcc_qupv3_wrap0_s0_clk = {
> .halt_reg = 0x17030,
> .halt_check = BRANCH_HALT_VOTED,
> @@ -3383,6 +3443,9 @@ static struct clk_regmap *gcc_sdm845_clocks[] = {
> [GPLL4] = &gpll4.clkr,
> [GCC_CPUSS_DVM_BUS_CLK] = &gcc_cpuss_dvm_bus_clk.clkr,
> [GCC_CPUSS_GNOC_CLK] = &gcc_cpuss_gnoc_clk.clkr,
> + [GCC_QSPI_CORE_CLK_SRC] = &gcc_qspi_core_clk_src.clkr,
> + [GCC_QSPI_CORE_CLK] = &gcc_qspi_core_clk.clkr,
> + [GCC_QSPI_CNOC_PERIPH_AHB_CLK] = &gcc_qspi_cnoc_periph_ahb_clk.clkr,
> };
>
> static const struct qcom_reset_map gcc_sdm845_resets[] = {
>
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation.
--
next prev parent reply other threads:[~2018-07-24 2:22 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-23 21:54 [PATCH v2 0/2] clk: qcom: Quad SPI (qspi) clock support for sdm845 Douglas Anderson
2018-07-23 21:54 ` [PATCH v2 2/2] clk: qcom: Add qspi (Quad SPI) clocks " Douglas Anderson
2018-07-24 2:22 ` Taniya Das [this message]
2018-07-24 3:30 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f4f92dcd-7a63-f9de-a7a0-c403672d5c6c@codeaurora.org \
--to=tdas@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=anischal@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=dianders@chromium.org \
--cc=girishm@codeaurora.org \
--cc=grahamr@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox