linux-clk.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Hilman <khilman@baylibre.com>
To: Mike Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-clk@vger.kernel.org,  linux-amlogic@lists.infradead.org,
	 linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] clk: gxbb: add MMC gate clocks, and expose for DT
Date: Mon, 15 Aug 2016 12:38:44 -0500	[thread overview]
Message-ID: <m2twem9bkr.fsf@baylibre.com> (raw)
In-Reply-To: <20160802214011.19077-1-khilman@baylibre.com> (Kevin Hilman's message of "Tue, 2 Aug 2016 14:40:11 -0700")

Kevin Hilman <khilman@baylibre.com> writes:

> Add the SD/eMMC gate clocks and expose them for use by DT.
>
> While at it, also explose FCLK_DIV2 since this is one of the input
> clocks to the mux internal to each of the SD/eMMC blocks.
>
> Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Gentle reminder ping.

> ---
> Applies on top of current clk-s905 branch.
>
>  drivers/clk/meson/gxbb.c              | 9 +++++++++
>  drivers/clk/meson/gxbb.h              | 7 +++++--
>  include/dt-bindings/clock/gxbb-clkc.h | 4 ++++
>  3 files changed, 18 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
> index 007b7157cf4b..4fc8e58feef9 100644
> --- a/drivers/clk/meson/gxbb.c
> +++ b/drivers/clk/meson/gxbb.c
> @@ -581,6 +581,9 @@ static MESON_GATE(sdio, HHI_GCLK_MPEG0, 17);
>  static MESON_GATE(abuf, HHI_GCLK_MPEG0, 18);
>  static MESON_GATE(hiu_iface, HHI_GCLK_MPEG0, 19);
>  static MESON_GATE(assist_misc, HHI_GCLK_MPEG0, 23);
> +static MESON_GATE(emmc_a, HHI_GCLK_MPEG0, 24);
> +static MESON_GATE(emmc_b, HHI_GCLK_MPEG0, 25);
> +static MESON_GATE(emmc_c, HHI_GCLK_MPEG0, 26);
>  static MESON_GATE(spi, HHI_GCLK_MPEG0, 30);
>  
>  static MESON_GATE(i2s_spdif, HHI_GCLK_MPEG1, 2);
> @@ -746,6 +749,9 @@ static struct clk_hw_onecell_data gxbb_hw_onecell_data = {
>  		[CLKID_AO_AHB_BUS]	    = &gxbb_ao_ahb_bus.hw,
>  		[CLKID_AO_IFACE]	    = &gxbb_ao_iface.hw,
>  		[CLKID_AO_I2C]		    = &gxbb_ao_i2c.hw,
> +		[CLKID_SD_EMMC_A]	    = &gxbb_emmc_a.hw,
> +		[CLKID_SD_EMMC_B]	    = &gxbb_emmc_b.hw,
> +		[CLKID_SD_EMMC_C]	    = &gxbb_emmc_c.hw,
>  	},
>  	.num = NR_CLKS,
>  };
> @@ -845,6 +851,9 @@ static struct clk_gate *gxbb_clk_gates[] = {
>  	&gxbb_ao_ahb_bus,
>  	&gxbb_ao_iface,
>  	&gxbb_ao_i2c,
> +	&gxbb_emmc_a,
> +	&gxbb_emmc_b,
> +	&gxbb_emmc_c,
>  };
>  
>  static int gxbb_clkc_probe(struct platform_device *pdev)
> diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
> index a2adf3448b59..217df516de44 100644
> --- a/drivers/clk/meson/gxbb.h
> +++ b/drivers/clk/meson/gxbb.h
> @@ -172,7 +172,7 @@
>  /* CLKID_CPUCLK */
>  #define CLKID_HDMI_PLL		  2
>  #define CLKID_FIXED_PLL		  3
> -#define CLKID_FCLK_DIV2		  4
> +/* CLKID_FCLK_DIV2 */
>  #define CLKID_FCLK_DIV3		  5
>  #define CLKID_FCLK_DIV4		  6
>  #define CLKID_FCLK_DIV5		  7
> @@ -262,8 +262,11 @@
>  #define CLKID_AO_AHB_BUS	  91
>  #define CLKID_AO_IFACE		  92
>  #define CLKID_AO_I2C		  93
> +/* CLKID_SD_EMMC_A */
> +/* CLKID_SD_EMMC_B */
> +/* CLKID_SD_EMMC_C */
>  
> -#define NR_CLKS			  94
> +#define NR_CLKS			  97
>  
>  /* include the CLKIDs that have been made part of the stable DT binding */
>  #include <dt-bindings/clock/gxbb-clkc.h>
> diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h
> index f889d80246cb..7d418643cdcc 100644
> --- a/include/dt-bindings/clock/gxbb-clkc.h
> +++ b/include/dt-bindings/clock/gxbb-clkc.h
> @@ -6,7 +6,11 @@
>  #define __GXBB_CLKC_H
>  
>  #define CLKID_CPUCLK		1
> +#define CLKID_FCLK_DIV2		4
>  #define CLKID_CLK81		12
>  #define CLKID_ETH		36
> +#define CLKID_SD_EMMC_A		94
> +#define CLKID_SD_EMMC_B		95
> +#define CLKID_SD_EMMC_C		96
>  
>  #endif /* __GXBB_CLKC_H */

  reply	other threads:[~2016-08-15 17:38 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-02 21:40 [PATCH] clk: gxbb: add MMC gate clocks, and expose for DT Kevin Hilman
2016-08-15 17:38 ` Kevin Hilman [this message]
2016-08-15 18:40 ` Martin Blumenstingl
2016-08-15 22:48 ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m2twem9bkr.fsf@baylibre.com \
    --to=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).