From: sashiko-bot@kernel.org
To: "Christian Marangi" <ansuelsmth@gmail.com>, linux-clk@vger.kernel.org
Subject: Re: [PATCH v7 2/2] clk: en7523: add support for .set_rate for en7581
Date: Fri, 20 Nov 2026 23:13:56 +0000 [thread overview]
Message-ID: <sashiko-outbox-226339@kernel.org> (raw)
In-Reply-To: <20261120225916.158641-3-ansuelsmth@gmail.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [High] clk: en7523: division by zero in _div_round_closest() via
en7581_find_best_rate()
--
commit e6dd4eae87f38e0af65399298c3f7bcf2f939553
Author: Christian Marangi <ansuelsmth@gmail.com>
clk: en7523: add support for .set_rate for en7581
This commit adds .set_rate and .determine_rate support for Airoha EN7581
clocks and switches rate recalculation to the standard clock divider
helpers.
> diff --git a/drivers/clk/clk-en7523.c b/drivers/clk/clk-en7523.c
> index 8c00646ecdc6a..f47f3ee75057e 100644
> --- a/drivers/clk/clk-en7523.c
> +++ b/drivers/clk/clk-en7523.c
[ ... ]
> @@ -773,11 +846,210 @@ static unsigned long en7581_recalc_rate(struct clk_hw *hw,
[ ... ]
> +static void en7581_find_best_rate(struct clk_hw *hw,
> + struct clk_rate_request *req,
> + const struct en_clk_desc *desc,
> + unsigned long parent_rate,
> + unsigned long requested_rate,
> + unsigned long *best_diff)
> +{
> + struct clk_rate_request div_req = *req;
> + int ret;
> +
> + if (!desc->div_bits) {
> + en7581_update_best_rate(req, requested_rate, parent_rate,
> + best_diff);
> + return;
> + }
> +
> + /* Treat each internal base rate as a fixed parent for the divider. */
> + div_req.rate = clamp(requested_rate, req->min_rate, req->max_rate);
> + div_req.best_parent_rate = parent_rate;
> + ret = divider_determine_rate(hw, &div_req, desc->div_table,
> + desc->div_bits,
> + CLK_DIVIDER_ROUND_CLOSEST);
> + if (ret)
> + return;
> +
> + en7581_update_best_rate(req, requested_rate, div_req.rate, best_diff);
> +}
> +
> +static int en7581_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + struct en_clk *en_clk = container_of(hw, struct en_clk, hw);
> + const struct en_clk_desc *desc = en_clk->desc;
> + unsigned long best_diff = ULONG_MAX;
> + unsigned long rate = req->rate;
> + int tmp_base_val = 0;
> +
> + if (!rate || (!desc->base_bits && !desc->div_bits))
> + return -EINVAL;
> +
> + if (!desc->base_bits) {
> + en7581_find_best_rate(hw, req, desc, desc->base_value,
> + rate, &best_diff);
> + goto exit;
> + }
> +
> + for (; tmp_base_val < desc->n_base_values; tmp_base_val++)
> + en7581_find_best_rate(hw, req, desc,
> + desc->base_values[tmp_base_val],
> + rate, &best_diff);
[Severity: High]
Can this trigger a division by zero in _div_round_closest() when
requested_rate exceeds parent_rate?
en7581_determine_rate() loops over every entry in desc->base_values[], so
requesting e.g. 500 MHz on "gsw" (whose base_values are 400 MHz and
500 MHz, with div_table == NULL) calls en7581_find_best_rate() with
parent_rate = 400 MHz and div_req.rate = 500 MHz. Without clamping
div_req.rate to parent_rate, divider_determine_rate() ->
clk_divider_bestdiv() -> _div_round() reaches _div_round_closest() with
parent_rate < rate:
drivers/clk/clk-divider.c:_div_round_closest() {
up = DIV_ROUND_UP_ULL((u64)parent_rate, rate);
down = parent_rate / rate;
if (flags & CLK_DIVIDER_POWER_OF_TWO) {
up = __roundup_pow_of_two(up);
down = __rounddown_pow_of_two(down);
} else if (table) {
up = _round_up_table(table, up);
down = _round_down_table(table, down);
}
up_rate = DIV_ROUND_UP_ULL((u64)parent_rate, up);
down_rate = DIV_ROUND_UP_ULL((u64)parent_rate, down);
}
When table is NULL and CLK_DIVIDER_POWER_OF_TWO is not set, down is 0 and
computing down_rate divides by zero.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120225916.158641-1-ansuelsmth@gmail.com?part=2
prev parent reply other threads:[~2026-11-20 23:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-20 22:59 [PATCH v7 0/2] clk: en7523: full clk_hw + set_rate for en7581 Christian Marangi
2026-11-20 22:59 ` [PATCH v7 1/2] clk: en7523: convert to full clk_hw implementation " Christian Marangi
2026-11-20 23:07 ` sashiko-bot
2026-11-20 22:59 ` [PATCH v7 2/2] clk: en7523: add support for .set_rate " Christian Marangi
2026-11-20 23:13 ` sashiko-bot [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-226339@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=ansuelsmth@gmail.com \
--cc=linux-clk@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox