From: Kim Phillips <kim.phillips@amd.com>
To: <kvm@vger.kernel.org>, <linux-coco@lists.linux.dev>,
<linux-kernel@vger.kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>,
Michael Roth <michael.roth@amd.com>,
Ashish Kalra <ashish.kalra@amd.com>,
"Nikunj A . Dadhania" <nikunj@amd.com>,
Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
Sean Christopherson <seanjc@google.com>,
"Paolo Bonzini" <pbonzini@redhat.com>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Thomas Gleixner <tglx@linutronix.de>,
"Kishon Vijay Abraham I" <kvijayab@amd.com>,
Kim Phillips <kim.phillips@amd.com>
Subject: [PATCH v4 2/2] KVM: SEV: Configure "ALLOWED_SEV_FEATURES" VMCB Field
Date: Wed, 5 Mar 2025 18:38:05 -0600 [thread overview]
Message-ID: <20250306003806.1048517-3-kim.phillips@amd.com> (raw)
In-Reply-To: <20250306003806.1048517-1-kim.phillips@amd.com>
AMD EPYC 5th generation processors have introduced a feature that allows
the hypervisor to control the SEV_FEATURES that are set for, or by, a
guest [1]. ALLOWED_SEV_FEATURES can be used by the hypervisor to enforce
that SEV-ES and SEV-SNP guests cannot enable features that the
hypervisor does not want to be enabled.
Always enable ALLOWED_SEV_FEATURES. A VMRUN will fail if any
non-reserved bits are 1 in SEV_FEATURES but are 0 in
ALLOWED_SEV_FEATURES.
Some SEV_FEATURES - currently PmcVirtualization and SecureAvic
(see Appendix B, Table B-4) - require an opt-in via ALLOWED_SEV_FEATURES,
i.e. are off-by-default, whereas all other features are effectively
on-by-default, but still honor ALLOWED_SEV_FEATURES.
[1] Section 15.36.20 "Allowed SEV Features", AMD64 Architecture
Programmer's Manual, Pub. 24593 Rev. 3.42 - March 2024:
https://bugzilla.kernel.org/attachment.cgi?id=306250
Co-developed-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kishon Vijay Abraham I <kvijayab@amd.com>
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
---
arch/x86/include/asm/svm.h | 7 ++++++-
arch/x86/kvm/svm/sev.c | 13 +++++++++++++
2 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/x86/include/asm/svm.h b/arch/x86/include/asm/svm.h
index 9b7fa99ae951..b382fd251e5b 100644
--- a/arch/x86/include/asm/svm.h
+++ b/arch/x86/include/asm/svm.h
@@ -159,7 +159,10 @@ struct __attribute__ ((__packed__)) vmcb_control_area {
u64 avic_physical_id; /* Offset 0xf8 */
u8 reserved_7[8];
u64 vmsa_pa; /* Used for an SEV-ES guest */
- u8 reserved_8[720];
+ u8 reserved_8[40];
+ u64 allowed_sev_features; /* Offset 0x138 */
+ u64 guest_sev_features; /* Offset 0x140 */
+ u8 reserved_9[664];
/*
* Offset 0x3e0, 32 bytes reserved
* for use by hypervisor/software.
@@ -291,6 +294,8 @@ static_assert((X2AVIC_MAX_PHYSICAL_ID & AVIC_PHYSICAL_MAX_INDEX_MASK) == X2AVIC_
#define SVM_SEV_FEAT_ALTERNATE_INJECTION BIT(4)
#define SVM_SEV_FEAT_DEBUG_SWAP BIT(5)
+#define VMCB_ALLOWED_SEV_FEATURES_VALID BIT_ULL(63)
+
struct vmcb_seg {
u16 selector;
u16 attrib;
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 0bc708ee2788..7f6cb950edcf 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -793,6 +793,14 @@ static int sev_launch_update_data(struct kvm *kvm, struct kvm_sev_cmd *argp)
return ret;
}
+static u64 allowed_sev_features(struct kvm_sev_info *sev)
+{
+ if (cpu_feature_enabled(X86_FEATURE_ALLOWED_SEV_FEATURES))
+ return sev->vmsa_features | VMCB_ALLOWED_SEV_FEATURES_VALID;
+
+ return 0;
+}
+
static int sev_es_sync_vmsa(struct vcpu_svm *svm)
{
struct kvm_vcpu *vcpu = &svm->vcpu;
@@ -891,6 +899,7 @@ static int sev_es_sync_vmsa(struct vcpu_svm *svm)
static int __sev_launch_update_vmsa(struct kvm *kvm, struct kvm_vcpu *vcpu,
int *error)
{
+ struct kvm_sev_info *sev = &to_kvm_svm(kvm)->sev_info;
struct sev_data_launch_update_vmsa vmsa;
struct vcpu_svm *svm = to_svm(vcpu);
int ret;
@@ -900,6 +909,8 @@ static int __sev_launch_update_vmsa(struct kvm *kvm, struct kvm_vcpu *vcpu,
return -EINVAL;
}
+ svm->vmcb->control.allowed_sev_features = allowed_sev_features(sev);
+
/* Perform some pre-encryption checks against the VMSA */
ret = sev_es_sync_vmsa(svm);
if (ret)
@@ -2426,6 +2437,8 @@ static int snp_launch_update_vmsa(struct kvm *kvm, struct kvm_sev_cmd *argp)
struct vcpu_svm *svm = to_svm(vcpu);
u64 pfn = __pa(svm->sev_es.vmsa) >> PAGE_SHIFT;
+ svm->vmcb->control.allowed_sev_features = allowed_sev_features(sev);
+
ret = sev_es_sync_vmsa(svm);
if (ret)
return ret;
--
2.43.0
next prev parent reply other threads:[~2025-03-06 0:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-06 0:38 [PATCH v4 0/2] KVM: SEV: Add support for the ALLOWED_SEV_FEATURES feature Kim Phillips
2025-03-06 0:38 ` [PATCH v4 1/2] x86/cpufeatures: Add "Allowed SEV Features" Feature Kim Phillips
2025-03-06 5:28 ` Gupta, Pankaj
2025-03-06 16:59 ` Borislav Petkov
2025-03-06 0:38 ` Kim Phillips [this message]
2025-03-06 5:28 ` [PATCH v4 2/2] KVM: SEV: Configure "ALLOWED_SEV_FEATURES" VMCB Field Gupta, Pankaj
2025-03-06 23:04 ` Kim Phillips
2025-03-06 19:27 ` Tom Lendacky
2025-03-06 23:04 ` Kim Phillips
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250306003806.1048517-3-kim.phillips@amd.com \
--to=kim.phillips@amd.com \
--cc=ashish.kalra@amd.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=hpa@zytor.com \
--cc=kvijayab@amd.com \
--cc=kvm@vger.kernel.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.roth@amd.com \
--cc=mingo@redhat.com \
--cc=nikunj@amd.com \
--cc=pbonzini@redhat.com \
--cc=seanjc@google.com \
--cc=tglx@linutronix.de \
--cc=thomas.lendacky@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox