From: Sean Christopherson <seanjc@google.com>
To: Thomas Gleixner <tglx@kernel.org>, Ingo Molnar <mingo@redhat.com>,
Borislav Petkov <bp@alien8.de>,
Dave Hansen <dave.hansen@linux.intel.com>,
x86@kernel.org, Kiryl Shutsemau <kas@kernel.org>,
Sean Christopherson <seanjc@google.com>,
Paolo Bonzini <pbonzini@redhat.com>
Cc: linux-kernel@vger.kernel.org, linux-coco@lists.linux.dev,
kvm@vger.kernel.org, Kai Huang <kai.huang@intel.com>,
Rick Edgecombe <rick.p.edgecombe@intel.com>,
Yan Zhao <yan.y.zhao@intel.com>,
Vishal Annapurve <vannapurve@google.com>,
Ackerley Tng <ackerleytng@google.com>,
Sagi Shahar <sagis@google.com>,
Binbin Wu <binbin.wu@linux.intel.com>,
Xiaoyao Li <xiaoyao.li@intel.com>,
Isaku Yamahata <isaku.yamahata@intel.com>
Subject: [RFC PATCH v5 12/45] x86/virt/tdx: Simplify tdmr_get_pamt_sz()
Date: Wed, 28 Jan 2026 17:14:44 -0800 [thread overview]
Message-ID: <20260129011517.3545883-13-seanjc@google.com> (raw)
In-Reply-To: <20260129011517.3545883-1-seanjc@google.com>
From: Rick Edgecombe <rick.p.edgecombe@intel.com>
For each memory region that the TDX module might use (TDMR), the three
separate PAMT allocations are needed. One for each supported page size
(1GB, 2MB, 4KB). These store information on each page in the TDMR. In
Linux, they are allocated out of one physically contiguous block, in order
to more efficiently use some internal TDX module book keeping resources.
So some simple math is needed to break the single large allocation into
three smaller allocations for each page size.
There are some commonalities in the math needed to calculate the base and
size for each smaller allocation, and so an effort was made to share logic
across the three. Unfortunately doing this turned out naturally tortured,
with a loop iterating over the three page sizes, only to call into a
function with a case statement for each page size. In the future Dynamic
PAMT will add more logic that is special to the 4KB page size, making the
benefit of the math sharing even more questionable.
Three is not a very high number, so get rid of the loop and just duplicate
the small calculation three times. In doing so, setup for future Dynamic
PAMT changes and drop a net 33 lines of code.
Since the loop that iterates over it is gone, further simplify the code by
dropping the array of intermediate size and base storage. Just store the
values to their final locations. Accept the small complication of having
to clear tdmr->pamt_4k_base in the error path, so that tdmr_do_pamt_func()
will not try to operate on the TDMR struct when attempting to free it.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Sagi Shahar <sagis@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
---
arch/x86/virt/vmx/tdx/tdx.c | 93 ++++++++++++-------------------------
1 file changed, 29 insertions(+), 64 deletions(-)
diff --git a/arch/x86/virt/vmx/tdx/tdx.c b/arch/x86/virt/vmx/tdx/tdx.c
index 783bf704f2cd..0c4c873bff80 100644
--- a/arch/x86/virt/vmx/tdx/tdx.c
+++ b/arch/x86/virt/vmx/tdx/tdx.c
@@ -445,31 +445,21 @@ static int fill_out_tdmrs(struct list_head *tmb_list,
* Calculate PAMT size given a TDMR and a page size. The returned
* PAMT size is always aligned up to 4K page boundary.
*/
-static unsigned long tdmr_get_pamt_sz(struct tdmr_info *tdmr, int pgsz,
- u16 pamt_entry_size)
+static unsigned long tdmr_get_pamt_sz(struct tdmr_info *tdmr, int pgsz)
{
unsigned long pamt_sz, nr_pamt_entries;
+ const int tdx_pg_size_shift[] = { PAGE_SHIFT, PMD_SHIFT, PUD_SHIFT };
+ const u16 pamt_entry_size[TDX_PS_NR] = {
+ tdx_sysinfo.tdmr.pamt_4k_entry_size,
+ tdx_sysinfo.tdmr.pamt_2m_entry_size,
+ tdx_sysinfo.tdmr.pamt_1g_entry_size,
+ };
- switch (pgsz) {
- case TDX_PS_4K:
- nr_pamt_entries = tdmr->size >> PAGE_SHIFT;
- break;
- case TDX_PS_2M:
- nr_pamt_entries = tdmr->size >> PMD_SHIFT;
- break;
- case TDX_PS_1G:
- nr_pamt_entries = tdmr->size >> PUD_SHIFT;
- break;
- default:
- WARN_ON_ONCE(1);
- return 0;
- }
+ nr_pamt_entries = tdmr->size >> tdx_pg_size_shift[pgsz];
+ pamt_sz = nr_pamt_entries * pamt_entry_size[pgsz];
- pamt_sz = nr_pamt_entries * pamt_entry_size;
/* TDX requires PAMT size must be 4K aligned */
- pamt_sz = ALIGN(pamt_sz, PAGE_SIZE);
-
- return pamt_sz;
+ return PAGE_ALIGN(pamt_sz);
}
/*
@@ -507,28 +497,21 @@ static int tdmr_get_nid(struct tdmr_info *tdmr, struct list_head *tmb_list)
* within @tdmr, and set up PAMTs for @tdmr.
*/
static int tdmr_set_up_pamt(struct tdmr_info *tdmr,
- struct list_head *tmb_list,
- u16 pamt_entry_size[])
+ struct list_head *tmb_list)
{
- unsigned long pamt_base[TDX_PS_NR];
- unsigned long pamt_size[TDX_PS_NR];
- unsigned long tdmr_pamt_base;
unsigned long tdmr_pamt_size;
struct page *pamt;
- int pgsz, nid;
-
+ int nid;
nid = tdmr_get_nid(tdmr, tmb_list);
/*
* Calculate the PAMT size for each TDX supported page size
* and the total PAMT size.
*/
- tdmr_pamt_size = 0;
- for (pgsz = TDX_PS_4K; pgsz < TDX_PS_NR; pgsz++) {
- pamt_size[pgsz] = tdmr_get_pamt_sz(tdmr, pgsz,
- pamt_entry_size[pgsz]);
- tdmr_pamt_size += pamt_size[pgsz];
- }
+ tdmr->pamt_4k_size = tdmr_get_pamt_sz(tdmr, TDX_PS_4K);
+ tdmr->pamt_2m_size = tdmr_get_pamt_sz(tdmr, TDX_PS_2M);
+ tdmr->pamt_1g_size = tdmr_get_pamt_sz(tdmr, TDX_PS_1G);
+ tdmr_pamt_size = tdmr->pamt_4k_size + tdmr->pamt_2m_size + tdmr->pamt_1g_size;
/*
* Allocate one chunk of physically contiguous memory for all
@@ -536,26 +519,18 @@ static int tdmr_set_up_pamt(struct tdmr_info *tdmr,
* in overlapped TDMRs.
*/
pamt = alloc_contig_pages(tdmr_pamt_size >> PAGE_SHIFT, GFP_KERNEL,
- nid, &node_online_map);
- if (!pamt)
+ nid, &node_online_map);
+ if (!pamt) {
+ /*
+ * tdmr->pamt_4k_base is zero so the
+ * error path will skip freeing.
+ */
return -ENOMEM;
-
- /*
- * Break the contiguous allocation back up into the
- * individual PAMTs for each page size.
- */
- tdmr_pamt_base = page_to_pfn(pamt) << PAGE_SHIFT;
- for (pgsz = TDX_PS_4K; pgsz < TDX_PS_NR; pgsz++) {
- pamt_base[pgsz] = tdmr_pamt_base;
- tdmr_pamt_base += pamt_size[pgsz];
}
- tdmr->pamt_4k_base = pamt_base[TDX_PS_4K];
- tdmr->pamt_4k_size = pamt_size[TDX_PS_4K];
- tdmr->pamt_2m_base = pamt_base[TDX_PS_2M];
- tdmr->pamt_2m_size = pamt_size[TDX_PS_2M];
- tdmr->pamt_1g_base = pamt_base[TDX_PS_1G];
- tdmr->pamt_1g_size = pamt_size[TDX_PS_1G];
+ tdmr->pamt_4k_base = page_to_phys(pamt);
+ tdmr->pamt_2m_base = tdmr->pamt_4k_base + tdmr->pamt_4k_size;
+ tdmr->pamt_1g_base = tdmr->pamt_2m_base + tdmr->pamt_2m_size;
return 0;
}
@@ -586,10 +561,7 @@ static void tdmr_do_pamt_func(struct tdmr_info *tdmr,
tdmr_get_pamt(tdmr, &pamt_base, &pamt_size);
/* Do nothing if PAMT hasn't been allocated for this TDMR */
- if (!pamt_size)
- return;
-
- if (WARN_ON_ONCE(!pamt_base))
+ if (!pamt_base)
return;
pamt_func(pamt_base, pamt_size);
@@ -615,14 +587,12 @@ static void tdmrs_free_pamt_all(struct tdmr_info_list *tdmr_list)
/* Allocate and set up PAMTs for all TDMRs */
static int tdmrs_set_up_pamt_all(struct tdmr_info_list *tdmr_list,
- struct list_head *tmb_list,
- u16 pamt_entry_size[])
+ struct list_head *tmb_list)
{
int i, ret = 0;
for (i = 0; i < tdmr_list->nr_consumed_tdmrs; i++) {
- ret = tdmr_set_up_pamt(tdmr_entry(tdmr_list, i), tmb_list,
- pamt_entry_size);
+ ret = tdmr_set_up_pamt(tdmr_entry(tdmr_list, i), tmb_list);
if (ret)
goto err;
}
@@ -903,18 +873,13 @@ static int construct_tdmrs(struct list_head *tmb_list,
struct tdmr_info_list *tdmr_list,
struct tdx_sys_info_tdmr *sysinfo_tdmr)
{
- u16 pamt_entry_size[TDX_PS_NR] = {
- sysinfo_tdmr->pamt_4k_entry_size,
- sysinfo_tdmr->pamt_2m_entry_size,
- sysinfo_tdmr->pamt_1g_entry_size,
- };
int ret;
ret = fill_out_tdmrs(tmb_list, tdmr_list);
if (ret)
return ret;
- ret = tdmrs_set_up_pamt_all(tdmr_list, tmb_list, pamt_entry_size);
+ ret = tdmrs_set_up_pamt_all(tdmr_list, tmb_list);
if (ret)
return ret;
--
2.53.0.rc1.217.geba53bf80e-goog
next prev parent reply other threads:[~2026-01-29 1:15 UTC|newest]
Thread overview: 148+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-29 1:14 [RFC PATCH v5 00/45] TDX: Dynamic PAMT + S-EPT Hugepage Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 01/45] x86/tdx: Use pg_level in TDX APIs, not the TDX-Module's 0-based level Sean Christopherson
2026-01-29 17:37 ` Dave Hansen
2026-01-29 1:14 ` [RFC PATCH v5 02/45] KVM: x86/mmu: Update iter->old_spte if cmpxchg64 on mirror SPTE "fails" Sean Christopherson
2026-01-29 22:10 ` Edgecombe, Rick P
2026-01-29 22:23 ` Sean Christopherson
2026-01-29 22:48 ` Edgecombe, Rick P
2026-02-03 8:48 ` Yan Zhao
2026-02-03 10:30 ` Huang, Kai
2026-02-03 20:06 ` Sean Christopherson
2026-02-03 21:34 ` Huang, Kai
2026-01-29 1:14 ` [RFC PATCH v5 03/45] KVM: TDX: Account all non-transient page allocations for per-TD structures Sean Christopherson
2026-01-29 22:15 ` Edgecombe, Rick P
2026-02-03 10:36 ` Huang, Kai
2026-01-29 1:14 ` [RFC PATCH v5 04/45] KVM: x86: Make "external SPTE" ops that can fail RET0 static calls Sean Christopherson
2026-01-29 22:20 ` Edgecombe, Rick P
2026-01-30 1:28 ` Sean Christopherson
2026-01-30 17:32 ` Edgecombe, Rick P
2026-02-03 10:44 ` Huang, Kai
2026-02-04 1:16 ` Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 05/45] KVM: TDX: Drop kvm_x86_ops.link_external_spt(), use .set_external_spte() for all Sean Christopherson
2026-01-30 23:55 ` Edgecombe, Rick P
2026-02-03 10:19 ` Yan Zhao
2026-02-03 20:05 ` Sean Christopherson
2026-02-04 6:41 ` Yan Zhao
2026-02-05 23:14 ` Sean Christopherson
2026-02-06 2:27 ` Yan Zhao
2026-02-18 19:37 ` Edgecombe, Rick P
2026-02-20 17:36 ` Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 06/45] KVM: x86/mmu: Fold set_external_spte_present() into its sole caller Sean Christopherson
2026-02-04 7:38 ` Yan Zhao
2026-02-05 23:06 ` Sean Christopherson
2026-02-06 2:29 ` Yan Zhao
2026-01-29 1:14 ` [RFC PATCH v5 07/45] KVM: x86/mmu: Plumb the SPTE _pointer_ into the TDP MMU's handle_changed_spte() Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 08/45] KVM: x86/mmu: Propagate mirror SPTE removal to S-EPT in handle_changed_spte() Sean Christopherson
2026-02-04 9:06 ` Yan Zhao
2026-02-05 2:23 ` Sean Christopherson
2026-02-05 5:39 ` Yan Zhao
2026-02-05 22:33 ` Sean Christopherson
2026-02-06 2:17 ` Yan Zhao
2026-02-06 17:41 ` Sean Christopherson
2026-02-10 10:54 ` Yan Zhao
2026-02-10 19:52 ` Sean Christopherson
2026-02-11 2:16 ` Yan Zhao
2026-02-14 0:36 ` Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 09/45] KVM: x86: Rework .free_external_spt() into .reclaim_external_sp() Sean Christopherson
2026-02-04 9:45 ` Yan Zhao
2026-02-05 7:04 ` Yan Zhao
2026-02-05 22:38 ` Sean Christopherson
2026-02-06 2:30 ` Yan Zhao
2026-01-29 1:14 ` [RFC PATCH v5 10/45] x86/tdx: Move all TDX error defines into <asm/shared/tdx_errno.h> Sean Christopherson
2026-01-29 18:13 ` Dave Hansen
2026-01-29 1:14 ` [RFC PATCH v5 11/45] x86/tdx: Add helpers to check return status codes Sean Christopherson
2026-01-29 18:58 ` Dave Hansen
2026-01-29 20:35 ` Sean Christopherson
2026-01-30 0:36 ` Edgecombe, Rick P
2026-02-03 20:32 ` Sean Christopherson
2026-01-29 1:14 ` Sean Christopherson [this message]
2026-01-29 1:14 ` [RFC PATCH v5 13/45] x86/virt/tdx: Allocate page bitmap for Dynamic PAMT Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 14/45] x86/virt/tdx: Allocate reference counters for PAMT memory Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 15/45] x86/virt/tdx: Improve PAMT refcounts allocation for sparse memory Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 16/45] x86/virt/tdx: Add tdx_alloc/free_control_page() helpers Sean Christopherson
2026-01-30 1:30 ` Sean Christopherson
2026-02-05 6:11 ` Yan Zhao
2026-02-05 22:35 ` Sean Christopherson
2026-02-06 2:32 ` Yan Zhao
2026-02-10 17:44 ` Dave Hansen
2026-02-10 22:15 ` Edgecombe, Rick P
2026-02-10 22:19 ` Dave Hansen
2026-02-10 22:46 ` Huang, Kai
2026-02-10 22:50 ` Dave Hansen
2026-02-10 23:02 ` Huang, Kai
2026-02-11 0:50 ` Edgecombe, Rick P
2026-01-29 1:14 ` [RFC PATCH v5 17/45] x86/virt/tdx: Optimize " Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 18/45] KVM: TDX: Allocate PAMT memory for TD and vCPU control structures Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 19/45] KVM: Allow owner of kvm_mmu_memory_cache to provide a custom page allocator Sean Christopherson
2026-02-03 10:56 ` Huang, Kai
2026-02-03 20:12 ` Sean Christopherson
2026-02-03 20:33 ` Edgecombe, Rick P
2026-02-03 21:17 ` Sean Christopherson
2026-02-03 21:29 ` Huang, Kai
2026-02-04 2:16 ` Sean Christopherson
2026-02-04 6:45 ` Huang, Kai
2026-01-29 1:14 ` [RFC PATCH v5 20/45] KVM: x86/mmu: Allocate/free S-EPT pages using tdx_{alloc,free}_control_page() Sean Christopherson
2026-02-03 11:16 ` Huang, Kai
2026-02-03 20:17 ` Sean Christopherson
2026-02-03 21:18 ` Huang, Kai
2026-02-06 9:48 ` Yan Zhao
2026-02-06 15:01 ` Sean Christopherson
2026-02-09 9:25 ` Yan Zhao
2026-02-09 23:20 ` Sean Christopherson
2026-02-10 8:30 ` Yan Zhao
2026-02-10 0:07 ` Dave Hansen
2026-02-10 1:40 ` Yan Zhao
2026-02-09 10:41 ` Huang, Kai
2026-02-09 22:44 ` Sean Christopherson
2026-02-10 10:54 ` Huang, Kai
2026-02-09 23:40 ` Dave Hansen
2026-02-10 0:03 ` Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 21/45] x86/tdx: Add APIs to support get/put of DPAMT entries from KVM, under spinlock Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 22/45] KVM: TDX: Get/put PAMT pages when (un)mapping private memory Sean Christopherson
2026-02-06 10:20 ` Yan Zhao
2026-02-06 16:03 ` Sean Christopherson
2026-02-06 19:27 ` Edgecombe, Rick P
2026-02-06 23:18 ` Sean Christopherson
2026-02-06 23:19 ` Edgecombe, Rick P
2026-02-09 10:33 ` Huang, Kai
2026-02-09 17:08 ` Edgecombe, Rick P
2026-02-09 21:05 ` Huang, Kai
2026-01-29 1:14 ` [RFC PATCH v5 23/45] x86/virt/tdx: Enable Dynamic PAMT Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 24/45] Documentation/x86: Add documentation for TDX's " Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 25/45] *** DO NOT MERGE *** x86/virt/tdx: Don't assume guest memory is backed by struct page Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 26/45] x86/virt/tdx: Enhance tdh_mem_page_aug() to support huge pages Sean Christopherson
2026-01-29 1:14 ` [RFC PATCH v5 27/45] x86/virt/tdx: Enhance tdh_phymem_page_wbinvd_hkid() to invalidate " Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 28/45] x86/virt/tdx: Extend "reset page" quirk to support " Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 29/45] x86/virt/tdx: Get/Put DPAMT page pair if and only if mapping size is 4KB Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 30/45] x86/virt/tdx: Add API to demote a 2MB mapping to 512 4KB mappings Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 31/45] KVM: x86/mmu: Prevent hugepage promotion for mirror roots in fault path Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 32/45] KVM: x86/mmu: Plumb the old_spte into kvm_x86_ops.set_external_spte() Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 33/45] KVM: TDX: Hoist tdx_sept_remove_private_spte() above set_private_spte() Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 34/45] KVM: TDX: Handle removal of leaf SPTEs in .set_private_spte() Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 35/45] KVM: TDX: Add helper to handle mapping leaf SPTE into S-EPT Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 36/45] KVM: TDX: Move S-EPT page demotion TODO to tdx_sept_set_private_spte() Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 37/45] KVM: x86/tdp_mmu: Alloc external_spt page for mirror page table splitting Sean Christopherson
2026-02-06 10:07 ` Yan Zhao
2026-02-06 16:09 ` Sean Christopherson
2026-02-11 9:49 ` Yan Zhao
2026-01-29 1:15 ` [RFC PATCH v5 38/45] KVM: x86/mmu: Add Dynamic PAMT support in TDP MMU for vCPU-induced page split Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 39/45] KVM: TDX: Add core support for splitting/demoting 2MiB S-EPT to 4KiB Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 40/45] KVM: x86: Introduce hugepage_set_guest_inhibit() Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 41/45] KVM: TDX: Honor the guest's accept level contained in an EPT violation Sean Christopherson
2026-01-29 15:32 ` Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 42/45] KVM: guest_memfd: Add helpers to get start/end gfns give gmem+slot+pgoff Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 43/45] *** DO NOT MERGE *** KVM: guest_memfd: Add pre-zap arch hook for shared<=>private conversion Sean Christopherson
2026-02-13 7:23 ` Huang, Kai
2026-01-29 1:15 ` [RFC PATCH v5 44/45] KVM: x86/mmu: Add support for splitting S-EPT hugepages on conversion Sean Christopherson
2026-01-29 15:39 ` Sean Christopherson
2026-02-11 8:43 ` Yan Zhao
2026-02-13 15:09 ` Sean Christopherson
2026-02-06 10:14 ` Yan Zhao
2026-02-06 14:46 ` Sean Christopherson
2026-01-29 1:15 ` [RFC PATCH v5 45/45] KVM: TDX: Turn on PG_LEVEL_2M Sean Christopherson
2026-01-29 17:13 ` [RFC PATCH v5 00/45] TDX: Dynamic PAMT + S-EPT Hugepage Konrad Rzeszutek Wilk
2026-01-29 17:17 ` Dave Hansen
2026-02-04 14:38 ` Sean Christopherson
2026-02-04 15:09 ` Dave Hansen
2026-02-05 15:53 ` Sean Christopherson
2026-02-05 16:01 ` Dave Hansen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260129011517.3545883-13-seanjc@google.com \
--to=seanjc@google.com \
--cc=ackerleytng@google.com \
--cc=binbin.wu@linux.intel.com \
--cc=bp@alien8.de \
--cc=dave.hansen@linux.intel.com \
--cc=isaku.yamahata@intel.com \
--cc=kai.huang@intel.com \
--cc=kas@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=pbonzini@redhat.com \
--cc=rick.p.edgecombe@intel.com \
--cc=sagis@google.com \
--cc=tglx@kernel.org \
--cc=vannapurve@google.com \
--cc=x86@kernel.org \
--cc=xiaoyao.li@intel.com \
--cc=yan.y.zhao@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox