From: "Aneesh Kumar K.V (Arm)" <aneesh.kumar@kernel.org>
To: linux-coco@lists.linux.dev, kvmarm@lists.linux.dev,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Cc: "Aneesh Kumar K.V (Arm)" <aneesh.kumar@kernel.org>,
Alexey Kardashevskiy <aik@amd.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Dan Williams <dan.j.williams@intel.com>,
Jason Gunthorpe <jgg@ziepe.ca>, Joerg Roedel <joro@8bytes.org>,
Jonathan Cameron <jic23@kernel.org>,
Marc Zyngier <maz@kernel.org>, Nicolin Chen <nicolinc@nvidia.com>,
Pranjal Shrivastava <praan@google.com>,
Robin Murphy <robin.murphy@arm.com>,
Samuel Ortiz <sameo@rivosinc.com>,
Steven Price <steven.price@arm.com>,
Suzuki K Poulose <Suzuki.Poulose@arm.com>,
Will Deacon <will@kernel.org>,
Xu Yilun <yilun.xu@linux.intel.com>
Subject: [RFC PATCH v4 15/16] coco: host: arm64: Transition vdevs to TDISP RUN state
Date: Mon, 27 Apr 2026 14:23:43 +0530 [thread overview]
Message-ID: <20260427085344.941627-16-aneesh.kumar@kernel.org> (raw)
In-Reply-To: <20260427085344.941627-1-aneesh.kumar@kernel.org>
Add host-side support for guest requests that move a vdev into the TDISP
RUN state.
Introduce the RMI helper for VDEV_START and a matching guest request
payload for VDEV_SET_TDI_STATE. In the host CCA TSM request handler, accept
only RHI_DA_TDI_CONFIG_RUN on the state-change path and invoke a new
cca_vdev_device_start() helper.
The start helper issues RMI_VDEV_START for the bound pdev/vdev pair and
then waits until firmware reports the vdev in the RMI_VDEV_STARTED state
before returning to the caller.
Signed-off-by: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org>
---
arch/arm64/include/asm/rmi_cmds.h | 11 +++++++++++
arch/arm64/include/uapi/asm/rmi-da.h | 6 ++++++
drivers/virt/coco/arm-cca-host/arm-cca.c | 15 +++++++++++++++
drivers/virt/coco/arm-cca-host/rmi-da.c | 22 ++++++++++++++++++++++
drivers/virt/coco/arm-cca-host/rmi-da.h | 1 +
5 files changed, 55 insertions(+)
diff --git a/arch/arm64/include/asm/rmi_cmds.h b/arch/arm64/include/asm/rmi_cmds.h
index 350fd9bc93a4..19eba97a6c7b 100644
--- a/arch/arm64/include/asm/rmi_cmds.h
+++ b/arch/arm64/include/asm/rmi_cmds.h
@@ -993,4 +993,15 @@ rmi_vdev_get_device_measurements(unsigned long rd, unsigned long pdev_phys,
return res.a0;
}
+
+static inline unsigned long rmi_vdev_start(unsigned long rd, unsigned long pdev_phys,
+ unsigned long vdev_phys)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_1_1_invoke(SMC_RMI_VDEV_START, rd, pdev_phys, vdev_phys, &res);
+
+ return res.a0;
+}
+
#endif /* __ASM_RMI_CMDS_H */
diff --git a/arch/arm64/include/uapi/asm/rmi-da.h b/arch/arm64/include/uapi/asm/rmi-da.h
index 572afb4095f2..c0cfcadfae47 100644
--- a/arch/arm64/include/uapi/asm/rmi-da.h
+++ b/arch/arm64/include/uapi/asm/rmi-da.h
@@ -38,4 +38,10 @@ struct arm64_vdev_device_memmap_guest_req {
};
#define __REC_DA_VDEV_MAP 0x5
+struct arm64_vdev_set_tdi_state_guest_req {
+ __u32 req_type;
+ __u32 tdi_state;
+};
+#define __RHI_DA_VDEV_SET_TDI_STATE 0x6
+
#endif
diff --git a/drivers/virt/coco/arm-cca-host/arm-cca.c b/drivers/virt/coco/arm-cca-host/arm-cca.c
index 66e0acadf743..3a682352fb68 100644
--- a/drivers/virt/coco/arm-cca-host/arm-cca.c
+++ b/drivers/virt/coco/arm-cca-host/arm-cca.c
@@ -608,6 +608,21 @@ static ssize_t cca_tsm_guest_req(struct pci_tdi *tdi, enum pci_tsm_req_scope sco
req_obj.gpa_top,
req_obj.pa_base);
}
+ case __RHI_DA_VDEV_SET_TDI_STATE:
+ {
+ struct arm64_vdev_set_tdi_state_guest_req req_obj;
+
+ if (req_len != sizeof(req_obj))
+ return -EINVAL;
+
+ if (copy_from_user((void *)&req_obj, req.user, req_len))
+ return -EFAULT;
+
+ if (req_obj.tdi_state != RHI_DA_TDI_CONFIG_RUN)
+ return -EINVAL;
+
+ return cca_vdev_device_start(pdev);
+ }
default:
return -EINVAL;
}
diff --git a/drivers/virt/coco/arm-cca-host/rmi-da.c b/drivers/virt/coco/arm-cca-host/rmi-da.c
index 543c40fb1160..60b750c961ea 100644
--- a/drivers/virt/coco/arm-cca-host/rmi-da.c
+++ b/drivers/virt/coco/arm-cca-host/rmi-da.c
@@ -1398,3 +1398,25 @@ int cca_vdev_device_map(struct pci_dev *pdev, unsigned long gpa_base,
return realm_dev_mem_map(kvm, rmm_pdev_phys, rmm_vdev_phys,
gpa_base, gpa_top, pa_base);
}
+
+int cca_vdev_device_start(struct pci_dev *pdev)
+{
+ phys_addr_t rmm_pdev_phys;
+ phys_addr_t rmm_vdev_phys;
+ struct cca_host_pdev_dsc *pdev_dsc;
+ struct cca_host_tdi *host_tdi;
+ struct realm *realm;
+ phys_addr_t rd_phys;
+
+ host_tdi = to_cca_host_tdi(pdev);
+ rmm_vdev_phys = virt_to_phys(host_tdi->rmm_vdev);
+ realm = &host_tdi->tdi.kvm->arch.realm;
+ rd_phys = virt_to_phys(realm->rd);
+
+ pdev_dsc = to_cca_pdev_dsc(pdev->tsm->dsm_dev);
+ rmm_pdev_phys = virt_to_phys(pdev_dsc->rmm_pdev);
+
+ if (rmi_vdev_start(rd_phys, rmm_pdev_phys, rmm_vdev_phys))
+ return -ENXIO;
+ return submit_vdev_state_transition_work(pdev, RMI_VDEV_STARTED);
+}
diff --git a/drivers/virt/coco/arm-cca-host/rmi-da.h b/drivers/virt/coco/arm-cca-host/rmi-da.h
index 3dfb6b3cc2ef..3082166038c3 100644
--- a/drivers/virt/coco/arm-cca-host/rmi-da.h
+++ b/drivers/virt/coco/arm-cca-host/rmi-da.h
@@ -252,5 +252,6 @@ int cca_vdev_update_interface_report(struct pci_dev *pdev);
int cca_vdev_update_device_measurements(struct pci_dev *pdev, unsigned long flags, u8 *nonce);
int cca_vdev_device_map(struct pci_dev *pdev, unsigned long gpa_base,
unsigned long gpa_top, unsigned long pa_base);
+int cca_vdev_device_start(struct pci_dev *pdev);
#endif
--
2.43.0
next prev parent reply other threads:[~2026-04-27 8:55 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-27 8:53 [RFC PATCH v4 00/16] coco/TSM: Implement host-side support for Arm CCA TDISP setup Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 01/16] iommu/arm-smmu-v3: Discover RME support and realm IRQ topology Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 02/16] iommu/arm-smmu-v3: Save the programmed MSI message in msi_desc Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 03/16] iommu/arm-smmu-v3: Add initial pSMMU realm viommu plumbing Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 04/16] iommu/arm-smmu-v3: Track realm pSMMU users with refcount_t Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 05/16] coco: host: arm64: Add support for virtual device communication Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 06/16] coco: host: arm64: Add support for RMM vdev objects Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 07/16] coco: host: arm64: Add pdev stream key refresh and purge helpers Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 08/16] coco: host: arm64: Add helpers to unlock and destroy RMM vdev Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 09/16] coco: host: arm64: Add support for da object read RHI handling Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 10/16] coco: host: arm64: Add helper for cached object fetches Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 11/16] coco: host: arm64: Fetch interface report via RMI Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 12/16] coco: host: arm64: Fetch device measurements " Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 13/16] coco: host: KVM: arm64: Handle vdev validate-mapping exits Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` [RFC PATCH v4 14/16] KVM: arm64: Unmap device mappings when a private granule is destroyed Aneesh Kumar K.V (Arm)
2026-04-27 8:53 ` Aneesh Kumar K.V (Arm) [this message]
2026-04-27 8:53 ` [RFC PATCH v4 16/16] KVM: arm64: CCA: enable DA in realm create parameters Aneesh Kumar K.V (Arm)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260427085344.941627-16-aneesh.kumar@kernel.org \
--to=aneesh.kumar@kernel.org \
--cc=Suzuki.Poulose@arm.com \
--cc=aik@amd.com \
--cc=catalin.marinas@arm.com \
--cc=dan.j.williams@intel.com \
--cc=jgg@ziepe.ca \
--cc=jic23@kernel.org \
--cc=joro@8bytes.org \
--cc=kvmarm@lists.linux.dev \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-coco@lists.linux.dev \
--cc=linux-kernel@vger.kernel.org \
--cc=maz@kernel.org \
--cc=nicolinc@nvidia.com \
--cc=praan@google.com \
--cc=robin.murphy@arm.com \
--cc=sameo@rivosinc.com \
--cc=steven.price@arm.com \
--cc=will@kernel.org \
--cc=yilun.xu@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox