From: Lee Nipper <lee.nipper@freescale.com>
To: linux-crypto <linux-crypto@vger.kernel.org>
Subject: [PATCH] crypto: talitos - add support for sha256 and md5 variants
Date: Wed, 09 Jul 2008 13:19:03 -0500 [thread overview]
Message-ID: <1215627543.18037.3.camel@al08linux99> (raw)
This patch adds support for:
authenc(hmac(sha256),cbc(aes)),
authenc(hmac(sha256),cbc(des3_ede)),
authenc(hmac(md5),cbc(aes)),
authenc(hmac(md5),cbc(des3_ede)).
Some constant usage was changed to use aes, des, and sha include files.
Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
---
This patch applies against the kernel.org crypto tree at
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git.
drivers/crypto/talitos.c | 111 +++++++++++++++++++++++++++++++++++++++++-----
1 files changed, 99 insertions(+), 12 deletions(-)
diff --git a/drivers/crypto/talitos.c b/drivers/crypto/talitos.c
index 8c270cd..b11943d 100644
--- a/drivers/crypto/talitos.c
+++ b/drivers/crypto/talitos.c
@@ -40,6 +40,7 @@
#include <crypto/algapi.h>
#include <crypto/aes.h>
+#include <crypto/des.h>
#include <crypto/sha.h>
#include <crypto/aead.h>
#include <crypto/authenc.h>
@@ -640,13 +641,9 @@ static void talitos_unregister_rng(struct device *dev)
*/
#define TALITOS_CRA_PRIORITY 3000
#define TALITOS_MAX_KEY_SIZE 64
-#define TALITOS_MAX_AUTH_SIZE 20
-#define TALITOS_AES_MIN_BLOCK_SIZE 16
-#define TALITOS_3DES_MIN_BLOCK_SIZE 24
+#define TALITOS_MAX_IV_LENGTH 16 /* max of AES_BLOCK_SIZE, DES3_EDE_BLOCK_SIZE */
-#define TALITOS_AES_IV_LENGTH 16
-#define TALITOS_3DES_IV_LENGTH 8
-#define TALITOS_MAX_IV_LENGTH 16
+#define MD5_DIGEST_SIZE 16
struct talitos_ctx {
struct device *dev;
@@ -1145,7 +1142,7 @@ static struct talitos_alg_template driver_algs[] = {
{
.name = "authenc(hmac(sha1),cbc(aes))",
.driver_name = "authenc-hmac-sha1-cbc-aes-talitos",
- .blocksize = TALITOS_AES_MIN_BLOCK_SIZE,
+ .blocksize = AES_BLOCK_SIZE,
.aead = {
.setkey = aead_authenc_setkey,
.setauthsize = aead_authenc_setauthsize,
@@ -1153,8 +1150,8 @@ static struct talitos_alg_template driver_algs[] = {
.decrypt = aead_authenc_decrypt,
.givencrypt = aead_authenc_givencrypt,
.geniv = "<built-in>",
- .ivsize = TALITOS_AES_IV_LENGTH,
- .maxauthsize = TALITOS_MAX_AUTH_SIZE,
+ .ivsize = AES_BLOCK_SIZE,
+ .maxauthsize = SHA1_DIGEST_SIZE,
},
.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
DESC_HDR_SEL0_AESU |
@@ -1167,7 +1164,7 @@ static struct talitos_alg_template driver_algs[] = {
{
.name = "authenc(hmac(sha1),cbc(des3_ede))",
.driver_name = "authenc-hmac-sha1-cbc-3des-talitos",
- .blocksize = TALITOS_3DES_MIN_BLOCK_SIZE,
+ .blocksize = DES3_EDE_BLOCK_SIZE,
.aead = {
.setkey = aead_authenc_setkey,
.setauthsize = aead_authenc_setauthsize,
@@ -1175,8 +1172,8 @@ static struct talitos_alg_template driver_algs[] = {
.decrypt = aead_authenc_decrypt,
.givencrypt = aead_authenc_givencrypt,
.geniv = "<built-in>",
- .ivsize = TALITOS_3DES_IV_LENGTH,
- .maxauthsize = TALITOS_MAX_AUTH_SIZE,
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .maxauthsize = SHA1_DIGEST_SIZE,
},
.desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
DESC_HDR_SEL0_DEU |
@@ -1186,6 +1183,96 @@ static struct talitos_alg_template driver_algs[] = {
DESC_HDR_MODE1_MDEU_INIT |
DESC_HDR_MODE1_MDEU_PAD |
DESC_HDR_MODE1_MDEU_SHA1_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha256),cbc(aes))",
+ .driver_name = "authenc-hmac-sha256-cbc-aes-talitos",
+ .blocksize = AES_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = AES_BLOCK_SIZE,
+ .maxauthsize = SHA256_DIGEST_SIZE,
+ },
+ .desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
+ DESC_HDR_SEL0_AESU |
+ DESC_HDR_MODE0_AESU_CBC |
+ DESC_HDR_SEL1_MDEUA |
+ DESC_HDR_MODE1_MDEU_INIT |
+ DESC_HDR_MODE1_MDEU_PAD |
+ DESC_HDR_MODE1_MDEU_SHA256_HMAC,
+ },
+ {
+ .name = "authenc(hmac(sha256),cbc(des3_ede))",
+ .driver_name = "authenc-hmac-sha256-cbc-3des-talitos",
+ .blocksize = DES3_EDE_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .maxauthsize = SHA256_DIGEST_SIZE,
+ },
+ .desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
+ DESC_HDR_SEL0_DEU |
+ DESC_HDR_MODE0_DEU_CBC |
+ DESC_HDR_MODE0_DEU_3DES |
+ DESC_HDR_SEL1_MDEUA |
+ DESC_HDR_MODE1_MDEU_INIT |
+ DESC_HDR_MODE1_MDEU_PAD |
+ DESC_HDR_MODE1_MDEU_SHA256_HMAC,
+ },
+ {
+ .name = "authenc(hmac(md5),cbc(aes))",
+ .driver_name = "authenc-hmac-md5-cbc-aes-talitos",
+ .blocksize = AES_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = AES_BLOCK_SIZE,
+ .maxauthsize = MD5_DIGEST_SIZE,
+ },
+ .desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
+ DESC_HDR_SEL0_AESU |
+ DESC_HDR_MODE0_AESU_CBC |
+ DESC_HDR_SEL1_MDEUA |
+ DESC_HDR_MODE1_MDEU_INIT |
+ DESC_HDR_MODE1_MDEU_PAD |
+ DESC_HDR_MODE1_MDEU_MD5_HMAC,
+ },
+ {
+ .name = "authenc(hmac(md5),cbc(des3_ede))",
+ .driver_name = "authenc-hmac-md5-cbc-3des-talitos",
+ .blocksize = DES3_EDE_BLOCK_SIZE,
+ .aead = {
+ .setkey = aead_authenc_setkey,
+ .setauthsize = aead_authenc_setauthsize,
+ .encrypt = aead_authenc_encrypt,
+ .decrypt = aead_authenc_decrypt,
+ .givencrypt = aead_authenc_givencrypt,
+ .geniv = "<built-in>",
+ .ivsize = DES3_EDE_BLOCK_SIZE,
+ .maxauthsize = MD5_DIGEST_SIZE,
+ },
+ .desc_hdr_template = DESC_HDR_TYPE_IPSEC_ESP |
+ DESC_HDR_SEL0_DEU |
+ DESC_HDR_MODE0_DEU_CBC |
+ DESC_HDR_MODE0_DEU_3DES |
+ DESC_HDR_SEL1_MDEUA |
+ DESC_HDR_MODE1_MDEU_INIT |
+ DESC_HDR_MODE1_MDEU_PAD |
+ DESC_HDR_MODE1_MDEU_MD5_HMAC,
}
};
--
1.5.6.1
next reply other threads:[~2008-07-09 18:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-09 18:19 Lee Nipper [this message]
2008-07-10 10:29 ` [PATCH] crypto: talitos - add support for sha256 and md5 variants Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1215627543.18037.3.camel@al08linux99 \
--to=lee.nipper@freescale.com \
--cc=linux-crypto@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox