From: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: linux-crypto@vger.kernel.org, linux-wireless@vger.kernel.org,
Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Subject: [PATCH 4/7] net/wireless: switch lib80211_crypt_tkip from arc4 to arc4blk
Date: Sat, 3 Apr 2010 09:49:26 +0200 [thread overview]
Message-ID: <1270280969-11357-5-git-send-email-sebastian@breakpoint.cc> (raw)
In-Reply-To: <1270280969-11357-1-git-send-email-sebastian@breakpoint.cc>
ecb(arc4) is getting replaced by arc4 which is a blkcipher by itself. The
required selects are now pulled in by LIB80211_CRYPT_TKIP instead of
selecting it by every driver.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
---
net/wireless/Kconfig | 2 ++
net/wireless/lib80211_crypt_tkip.c | 11 +++++++----
2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index 90e93a5..119f1eb 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -147,6 +147,8 @@ config LIB80211_CRYPT_CCMP
tristate
config LIB80211_CRYPT_TKIP
+ select CRYPTO
+ select CRYPTO_ARC4BLK
tristate
config LIB80211_DEBUG
diff --git a/net/wireless/lib80211_crypt_tkip.c b/net/wireless/lib80211_crypt_tkip.c
index c362873..089f84f 100644
--- a/net/wireless/lib80211_crypt_tkip.c
+++ b/net/wireless/lib80211_crypt_tkip.c
@@ -28,6 +28,7 @@
#include <net/iw_handler.h>
#include <linux/crypto.h>
+#include <crypto/arc4.h>
#include <linux/crc32.h>
#include <net/lib80211.h>
@@ -94,7 +95,7 @@ static void *lib80211_tkip_init(int key_idx)
priv->key_idx = key_idx;
- priv->tx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
+ priv->tx_tfm_arc4 = crypto_alloc_blkcipher("arc4", 0,
CRYPTO_ALG_ASYNC);
if (IS_ERR(priv->tx_tfm_arc4)) {
printk(KERN_DEBUG "lib80211_crypt_tkip: could not allocate "
@@ -112,7 +113,7 @@ static void *lib80211_tkip_init(int key_idx)
goto fail;
}
- priv->rx_tfm_arc4 = crypto_alloc_blkcipher("ecb(arc4)", 0,
+ priv->rx_tfm_arc4 = crypto_alloc_blkcipher("arc4", 0,
CRYPTO_ALG_ASYNC);
if (IS_ERR(priv->rx_tfm_arc4)) {
printk(KERN_DEBUG "lib80211_crypt_tkip: could not allocate "
@@ -360,6 +361,7 @@ static int lib80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
{
struct lib80211_tkip_data *tkey = priv;
struct blkcipher_desc desc = { .tfm = tkey->tx_tfm_arc4 };
+ struct arc4_iv *iv = crypto_blkcipher_crt(tkey->tx_tfm_arc4)->iv;
int len;
u8 rc4key[16], *pos, *icv;
u32 crc;
@@ -392,7 +394,7 @@ static int lib80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
icv[2] = crc >> 16;
icv[3] = crc >> 24;
- crypto_blkcipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
+ arc4_setup_iv(iv, rc4key, 16);
sg_init_one(&sg, pos, len + 4);
return crypto_blkcipher_encrypt(&desc, &sg, &sg, len + 4);
}
@@ -414,6 +416,7 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
{
struct lib80211_tkip_data *tkey = priv;
struct blkcipher_desc desc = { .tfm = tkey->rx_tfm_arc4 };
+ struct arc4_iv *iv = crypto_blkcipher_crt(tkey->rx_tfm_arc4)->iv;
u8 rc4key[16];
u8 keyidx, *pos;
u32 iv32;
@@ -485,7 +488,7 @@ static int lib80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
plen = skb->len - hdr_len - 12;
- crypto_blkcipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
+ arc4_setup_iv(iv, rc4key, 16);
sg_init_one(&sg, pos, plen + 4);
if (crypto_blkcipher_decrypt(&desc, &sg, &sg, plen + 4)) {
if (net_ratelimit()) {
--
1.6.6
next prev parent reply other threads:[~2010-04-03 7:49 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-03 7:49 Convert arc4 from a cipher into a block cipher Sebastian Andrzej Siewior
2010-04-03 7:49 ` [PATCH 1/7] crypto: rename arc4 Sebastian Andrzej Siewior
[not found] ` <1270280969-11357-1-git-send-email-sebastian-E0PNVn5OA6ohrxcnuTQ+TQ@public.gmane.org>
2010-04-03 7:49 ` [PATCH 2/7] crypto: add blkcipher implementation of ARC4 Sebastian Andrzej Siewior
2010-04-05 8:42 ` Herbert Xu
2010-04-05 17:04 ` [PATCH v2] " Sebastian Andrzej Siewior
2010-04-06 12:44 ` Herbert Xu
2010-04-06 20:30 ` Sebastian Andrzej Siewior
2010-04-07 0:31 ` Herbert Xu
2010-04-07 8:23 ` Sebastian Andrzej Siewior
2010-04-07 9:25 ` Herbert Xu
2010-04-07 6:19 ` Pavel Roskin
2010-04-07 8:29 ` Sebastian Andrzej Siewior
2010-04-07 16:31 ` Pavel Roskin
2010-04-05 20:33 ` Convert arc4 from a cipher into a block cipher Pavel Roskin
2010-04-06 0:39 ` Herbert Xu
2010-04-03 7:49 ` [PATCH 3/7] crypto/testmgr: add testing for arc4 based on ecb(arc4) Sebastian Andrzej Siewior
2010-04-07 6:29 ` Pavel Roskin
2010-04-07 9:29 ` Herbert Xu
[not found] ` <20100407092907.GB29993-lOAM2aK0SrRLBo1qDEOMRrpzq4S04n8Q@public.gmane.org>
2010-04-08 7:58 ` Sebastian Andrzej Siewior
2010-04-03 7:49 ` Sebastian Andrzej Siewior [this message]
[not found] ` <1270280969-11357-5-git-send-email-sebastian-E0PNVn5OA6ohrxcnuTQ+TQ@public.gmane.org>
2010-04-05 17:13 ` [PATCH 4/7] net/wireless: switch lib80211_crypt_tkip from arc4 to arc4blk John W. Linville
2010-04-03 7:49 ` [PATCH 5/7] net/wireless: switch lib80211_crypt_wep " Sebastian Andrzej Siewior
2010-04-05 17:13 ` John W. Linville
2010-04-03 7:49 ` [PATCH 6/7] net/mac80211: convert wep " Sebastian Andrzej Siewior
2010-04-05 17:15 ` John W. Linville
2010-04-03 7:49 ` [PATCH 7/7] net/ppp_mppe: convert " Sebastian Andrzej Siewior
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1270280969-11357-5-git-send-email-sebastian@breakpoint.cc \
--to=sebastian@breakpoint.cc \
--cc=herbert@gondor.apana.org.au \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).