From: Catalin Vasile <cata.vasile@nxp.com>
To: <linux-crypto@vger.kernel.org>
Cc: <linux-crypto-owner@vger.kernel.org>, <horia.geanta@nxp.com>,
"Catalin Vasile" <cata.vasile@nxp.com>
Subject: [PATCH v2] crypto: caam - fix sg dump
Date: Thu, 22 Sep 2016 11:57:58 +0300 [thread overview]
Message-ID: <1474534678-10118-1-git-send-email-cata.vasile@nxp.com> (raw)
Ensure scatterlists have a virtual memory mapping before dumping.
Signed-off-by: Catalin Vasile <cata.vasile@nxp.com>
---
Changes:
V2:
* resolved issue of sleeping in atomic contexts
---
---
drivers/crypto/caam/caamalg.c | 79 +++++++++++++++++++++++++++++++++----------
1 file changed, 61 insertions(+), 18 deletions(-)
diff --git a/drivers/crypto/caam/caamalg.c b/drivers/crypto/caam/caamalg.c
index f1116e7..eb97562 100644
--- a/drivers/crypto/caam/caamalg.c
+++ b/drivers/crypto/caam/caamalg.c
@@ -111,6 +111,42 @@
#else
#define debug(format, arg...)
#endif
+
+#ifdef DEBUG
+#include <linux/highmem.h>
+
+static void dbg_dump_sg(const char *level, const char *prefix_str,
+ int prefix_type, int rowsize, int groupsize,
+ struct scatterlist *sg, size_t tlen, bool ascii,
+ bool may_sleep)
+{
+ struct scatterlist *it;
+ void *it_page;
+ size_t len;
+ void *buf;
+
+ for (it = sg; it != NULL && tlen > 0 ; it = sg_next(sg)) {
+ /*
+ * make sure the scatterlist's page
+ * has a valid virtual memory mapping
+ */
+ it_page = kmap_atomic(sg_page(it));
+ if (unlikely(!it_page)) {
+ printk(KERN_ERR "dbg_dump_sg: kmap failed\n");
+ return;
+ }
+
+ buf = it_page + it->offset;
+ len = min(tlen, it->length);
+ print_hex_dump(level, prefix_str, prefix_type, rowsize,
+ groupsize, buf, len, ascii);
+ tlen -= len;
+
+ kunmap_atomic(it_page);
+ }
+}
+#endif
+
static struct list_head alg_list;
struct caam_alg_entry {
@@ -1982,9 +2018,9 @@ static void ablkcipher_encrypt_done(struct device *jrdev, u32 *desc, u32 err,
print_hex_dump(KERN_ERR, "dstiv @"__stringify(__LINE__)": ",
DUMP_PREFIX_ADDRESS, 16, 4, req->info,
edesc->src_nents > 1 ? 100 : ivsize, 1);
- print_hex_dump(KERN_ERR, "dst @"__stringify(__LINE__)": ",
- DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->src),
- edesc->dst_nents > 1 ? 100 : req->nbytes, 1);
+ dbg_dump_sg(KERN_ERR, "dst @"__stringify(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, req->dst,
+ edesc->dst_nents > 1 ? 100 : req->nbytes, 1, true);
#endif
ablkcipher_unmap(jrdev, edesc, req);
@@ -2014,9 +2050,9 @@ static void ablkcipher_decrypt_done(struct device *jrdev, u32 *desc, u32 err,
print_hex_dump(KERN_ERR, "dstiv @"__stringify(__LINE__)": ",
DUMP_PREFIX_ADDRESS, 16, 4, req->info,
ivsize, 1);
- print_hex_dump(KERN_ERR, "dst @"__stringify(__LINE__)": ",
- DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->src),
- edesc->dst_nents > 1 ? 100 : req->nbytes, 1);
+ dbg_dump_sg(KERN_ERR, "dst @"__stringify(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, req->dst,
+ edesc->dst_nents > 1 ? 100 : req->nbytes, 1, true);
#endif
ablkcipher_unmap(jrdev, edesc, req);
@@ -2171,12 +2207,15 @@ static void init_ablkcipher_job(u32 *sh_desc, dma_addr_t ptr,
int len, sec4_sg_index = 0;
#ifdef DEBUG
+ bool may_sleep = ((req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
+ CRYPTO_TFM_REQ_MAY_SLEEP)) != 0);
print_hex_dump(KERN_ERR, "presciv@"__stringify(__LINE__)": ",
DUMP_PREFIX_ADDRESS, 16, 4, req->info,
ivsize, 1);
- print_hex_dump(KERN_ERR, "src @"__stringify(__LINE__)": ",
- DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->src),
- edesc->src_nents ? 100 : req->nbytes, 1);
+ printk(KERN_ERR "asked=%d, nbytes%d\n", (int)edesc->src_nents ? 100 : req->nbytes, req->nbytes);
+ dbg_dump_sg(KERN_ERR, "src @"__stringify(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, req->src,
+ edesc->src_nents ? 100 : req->nbytes, 1, may_sleep);
#endif
len = desc_len(sh_desc);
@@ -2228,12 +2267,14 @@ static void init_ablkcipher_giv_job(u32 *sh_desc, dma_addr_t ptr,
int len, sec4_sg_index = 0;
#ifdef DEBUG
+ bool may_sleep = ((req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
+ CRYPTO_TFM_REQ_MAY_SLEEP)) != 0);
print_hex_dump(KERN_ERR, "presciv@" __stringify(__LINE__) ": ",
DUMP_PREFIX_ADDRESS, 16, 4, req->info,
ivsize, 1);
- print_hex_dump(KERN_ERR, "src @" __stringify(__LINE__) ": ",
- DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->src),
- edesc->src_nents ? 100 : req->nbytes, 1);
+ dbg_dump_sg(KERN_ERR, "src @" __stringify(__LINE__) ": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, req->src,
+ edesc->src_nents ? 100 : req->nbytes, 1, may_sleep);
#endif
len = desc_len(sh_desc);
@@ -2503,18 +2544,20 @@ static int aead_decrypt(struct aead_request *req)
u32 *desc;
int ret = 0;
+#ifdef DEBUG
+ bool may_sleep = ((req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
+ CRYPTO_TFM_REQ_MAY_SLEEP)) != 0);
+ dbg_dump_sg(KERN_ERR, "dec src@"__stringify(__LINE__)": ",
+ DUMP_PREFIX_ADDRESS, 16, 4, req->src,
+ req->assoclen + req->cryptlen, 1, may_sleep);
+#endif
+
/* allocate extended descriptor */
edesc = aead_edesc_alloc(req, AUTHENC_DESC_JOB_IO_LEN,
&all_contig, false);
if (IS_ERR(edesc))
return PTR_ERR(edesc);
-#ifdef DEBUG
- print_hex_dump(KERN_ERR, "dec src@"__stringify(__LINE__)": ",
- DUMP_PREFIX_ADDRESS, 16, 4, sg_virt(req->src),
- req->assoclen + req->cryptlen, 1);
-#endif
-
/* Create and submit job descriptor*/
init_authenc_job(req, edesc, all_contig, false);
#ifdef DEBUG
--
1.8.3.1
next reply other threads:[~2016-09-22 8:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-22 8:57 Catalin Vasile [this message]
2016-09-22 10:23 ` [PATCH v2] crypto: caam - fix sg dump Horia Geanta Neag
2016-09-22 10:55 ` Herbert Xu
2016-09-22 11:47 ` Horia Geanta Neag
2016-09-22 13:08 ` Herbert Xu
2016-09-22 10:47 ` Herbert Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1474534678-10118-1-git-send-email-cata.vasile@nxp.com \
--to=cata.vasile@nxp.com \
--cc=horia.geanta@nxp.com \
--cc=linux-crypto-owner@vger.kernel.org \
--cc=linux-crypto@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox