From: Gilad Ben-Yossef <gilad-6S/DczAoZh3WXxRugSxzZg@public.gmane.org>
To: Herbert Xu
<herbert-lOAM2aK0SrRLBo1qDEOMRrpzq4S04n8Q@public.gmane.org>,
"David S. Miller" <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>,
Jonathan Corbet <corbet-T1hC0tSOHrs@public.gmane.org>,
David Howells <dhowells-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Tom Lendacky <thomas.lendacky-5C7GfCeVMHo@public.gmane.org>,
Gary Hook <gary.hook-5C7GfCeVMHo@public.gmane.org>,
Boris Brezillon
<boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
Arnaud Ebalard <arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org>,
Matthias Brugger
<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Alasdair Kergon <agk-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
Mike Snitzer <snitzer-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
Shaohua Li <shli-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Steve French <sfrench-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org>,
"Theodore Y. Ts'o" <tytso-3s7WtUTddSA@public.gmane.org>,
Jaegeuk Kim <jaegeuk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mimi Zohar
<zohar-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org>,
Dmitry Kasatkin
<dmitry.kasatkin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
James Morris
<james.l.morris-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org>,
"Serge E. Hallyn" <serge-A9i7LUbDfNHQT0dZR+AlfA@public.gmane.org>,
linux-crypto@v
Cc: Ofir Drang <ofir.drang-5wv7dgnIgG8@public.gmane.org>,
Mikulas Patocka
<mpatocka-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v7 12/19] dm: move dm-verity to generic async completion
Date: Thu, 24 Aug 2017 17:18:59 +0300 [thread overview]
Message-ID: <1503584350-7831-13-git-send-email-gilad@benyossef.com> (raw)
In-Reply-To: <1503584350-7831-1-git-send-email-gilad-6S/DczAoZh3WXxRugSxzZg@public.gmane.org>
dm-verity is starting async. crypto ops and waiting for them to complete.
Move it over to generic code doing the same.
This also avoids a future potential data coruption bug created
by the use of wait_for_completion_interruptible() without dealing
correctly with an interrupt aborting the wait prior to the
async op finishing, should this code ever move to a context
where signals are not masked.
Signed-off-by: Gilad Ben-Yossef <gilad-6S/DczAoZh3WXxRugSxzZg@public.gmane.org>
CC: Mikulas Patocka <mpatocka-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
drivers/md/dm-verity-target.c | 81 +++++++++++--------------------------------
drivers/md/dm-verity.h | 5 ---
2 files changed, 20 insertions(+), 66 deletions(-)
diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c
index 79f18d4..8df08a8 100644
--- a/drivers/md/dm-verity-target.c
+++ b/drivers/md/dm-verity-target.c
@@ -92,74 +92,33 @@ static sector_t verity_position_at_level(struct dm_verity *v, sector_t block,
return block >> (level * v->hash_per_block_bits);
}
-/*
- * Callback function for asynchrnous crypto API completion notification
- */
-static void verity_op_done(struct crypto_async_request *base, int err)
-{
- struct verity_result *res = (struct verity_result *)base->data;
-
- if (err == -EINPROGRESS)
- return;
-
- res->err = err;
- complete(&res->completion);
-}
-
-/*
- * Wait for async crypto API callback
- */
-static inline int verity_complete_op(struct verity_result *res, int ret)
-{
- switch (ret) {
- case 0:
- break;
-
- case -EINPROGRESS:
- case -EBUSY:
- ret = wait_for_completion_interruptible(&res->completion);
- if (!ret)
- ret = res->err;
- reinit_completion(&res->completion);
- break;
-
- default:
- DMERR("verity_wait_hash: crypto op submission failed: %d", ret);
- }
-
- if (unlikely(ret < 0))
- DMERR("verity_wait_hash: crypto op failed: %d", ret);
-
- return ret;
-}
-
static int verity_hash_update(struct dm_verity *v, struct ahash_request *req,
const u8 *data, size_t len,
- struct verity_result *res)
+ struct crypto_wait *wait)
{
struct scatterlist sg;
sg_init_one(&sg, data, len);
ahash_request_set_crypt(req, &sg, NULL, len);
- return verity_complete_op(res, crypto_ahash_update(req));
+ return crypto_wait_req(crypto_ahash_update(req), wait);
}
/*
* Wrapper for crypto_ahash_init, which handles verity salting.
*/
static int verity_hash_init(struct dm_verity *v, struct ahash_request *req,
- struct verity_result *res)
+ struct crypto_wait *wait)
{
int r;
ahash_request_set_tfm(req, v->tfm);
ahash_request_set_callback(req, CRYPTO_TFM_REQ_MAY_SLEEP |
CRYPTO_TFM_REQ_MAY_BACKLOG,
- verity_op_done, (void *)res);
- init_completion(&res->completion);
+ crypto_req_done, (void *)wait);
+ crypto_init_wait(wait);
- r = verity_complete_op(res, crypto_ahash_init(req));
+ r = crypto_wait_req(crypto_ahash_init(req), wait);
if (unlikely(r < 0)) {
DMERR("crypto_ahash_init failed: %d", r);
@@ -167,18 +126,18 @@ static int verity_hash_init(struct dm_verity *v, struct ahash_request *req,
}
if (likely(v->salt_size && (v->version >= 1)))
- r = verity_hash_update(v, req, v->salt, v->salt_size, res);
+ r = verity_hash_update(v, req, v->salt, v->salt_size, wait);
return r;
}
static int verity_hash_final(struct dm_verity *v, struct ahash_request *req,
- u8 *digest, struct verity_result *res)
+ u8 *digest, struct crypto_wait *wait)
{
int r;
if (unlikely(v->salt_size && (!v->version))) {
- r = verity_hash_update(v, req, v->salt, v->salt_size, res);
+ r = verity_hash_update(v, req, v->salt, v->salt_size, wait);
if (r < 0) {
DMERR("verity_hash_final failed updating salt: %d", r);
@@ -187,7 +146,7 @@ static int verity_hash_final(struct dm_verity *v, struct ahash_request *req,
}
ahash_request_set_crypt(req, NULL, digest, 0);
- r = verity_complete_op(res, crypto_ahash_final(req));
+ r = crypto_wait_req(crypto_ahash_final(req), wait);
out:
return r;
}
@@ -196,17 +155,17 @@ int verity_hash(struct dm_verity *v, struct ahash_request *req,
const u8 *data, size_t len, u8 *digest)
{
int r;
- struct verity_result res;
+ struct crypto_wait wait;
- r = verity_hash_init(v, req, &res);
+ r = verity_hash_init(v, req, &wait);
if (unlikely(r < 0))
goto out;
- r = verity_hash_update(v, req, data, len, &res);
+ r = verity_hash_update(v, req, data, len, &wait);
if (unlikely(r < 0))
goto out;
- r = verity_hash_final(v, req, digest, &res);
+ r = verity_hash_final(v, req, digest, &wait);
out:
return r;
@@ -389,7 +348,7 @@ int verity_hash_for_block(struct dm_verity *v, struct dm_verity_io *io,
* Calculates the digest for the given bio
*/
int verity_for_io_block(struct dm_verity *v, struct dm_verity_io *io,
- struct bvec_iter *iter, struct verity_result *res)
+ struct bvec_iter *iter, struct crypto_wait *wait)
{
unsigned int todo = 1 << v->data_dev_block_bits;
struct bio *bio = dm_bio_from_per_bio_data(io, v->ti->per_io_data_size);
@@ -414,7 +373,7 @@ int verity_for_io_block(struct dm_verity *v, struct dm_verity_io *io,
*/
sg_set_page(&sg, bv.bv_page, len, bv.bv_offset);
ahash_request_set_crypt(req, &sg, NULL, len);
- r = verity_complete_op(res, crypto_ahash_update(req));
+ r = crypto_wait_req(crypto_ahash_update(req), wait);
if (unlikely(r < 0)) {
DMERR("verity_for_io_block crypto op failed: %d", r);
@@ -482,7 +441,7 @@ static int verity_verify_io(struct dm_verity_io *io)
struct dm_verity *v = io->v;
struct bvec_iter start;
unsigned b;
- struct verity_result res;
+ struct crypto_wait wait;
for (b = 0; b < io->n_blocks; b++) {
int r;
@@ -507,17 +466,17 @@ static int verity_verify_io(struct dm_verity_io *io)
continue;
}
- r = verity_hash_init(v, req, &res);
+ r = verity_hash_init(v, req, &wait);
if (unlikely(r < 0))
return r;
start = io->iter;
- r = verity_for_io_block(v, io, &io->iter, &res);
+ r = verity_for_io_block(v, io, &io->iter, &wait);
if (unlikely(r < 0))
return r;
r = verity_hash_final(v, req, verity_io_real_digest(v, io),
- &res);
+ &wait);
if (unlikely(r < 0))
return r;
diff --git a/drivers/md/dm-verity.h b/drivers/md/dm-verity.h
index a59e0ad..b675bc0 100644
--- a/drivers/md/dm-verity.h
+++ b/drivers/md/dm-verity.h
@@ -90,11 +90,6 @@ struct dm_verity_io {
*/
};
-struct verity_result {
- struct completion completion;
- int err;
-};
-
static inline struct ahash_request *verity_io_hash_req(struct dm_verity *v,
struct dm_verity_io *io)
{
--
2.1.4
next prev parent reply other threads:[~2017-08-24 14:18 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-24 14:18 [PATCH v7 00/19] simplify crypto wait for async op Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 01/19] crypto: change transient busy return code to -EAGAIN Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 02/19] crypto: ccp: use -EAGAIN for transient busy indication Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 03/19] crypto: remove redundant backlog checks on EBUSY Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 04/19] crypto: marvell/cesa: " Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 05/19] crypto: introduce crypto wait for async op Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 06/19] crypto: move algif to generic async completion Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 07/19] crypto: move pub key " Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 08/19] crypto: move drbg " Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 10/19] crypto: move testmgr " Gilad Ben-Yossef
2017-08-24 14:18 ` [PATCH v7 11/19] fscrypt: move " Gilad Ben-Yossef
2017-08-24 14:19 ` [PATCH v7 13/19] cifs: " Gilad Ben-Yossef
2017-08-24 14:19 ` [PATCH v7 14/19] ima: " Gilad Ben-Yossef
2017-08-24 14:19 ` [PATCH v7 15/19] crypto: tcrypt: " Gilad Ben-Yossef
2017-08-24 14:19 ` [PATCH v7 16/19] crypto: talitos: " Gilad Ben-Yossef
2017-08-24 14:19 ` [PATCH v7 17/19] crypto: qce: " Gilad Ben-Yossef
2017-08-24 14:19 ` [PATCH v7 18/19] crypto: mediatek: " Gilad Ben-Yossef
2017-08-24 14:19 ` [PATCH v7 19/19] crypto: adapt api sample to use async. op wait Gilad Ben-Yossef
[not found] ` <1503584350-7831-1-git-send-email-gilad-6S/DczAoZh3WXxRugSxzZg@public.gmane.org>
2017-08-24 14:18 ` [PATCH v7 09/19] crypto: move gcm to generic async completion Gilad Ben-Yossef
2017-08-24 14:18 ` Gilad Ben-Yossef [this message]
2017-08-31 12:31 ` [PATCH v7 00/19] simplify crypto wait for async op Harsh Jain
2017-09-03 6:09 ` Gilad Ben-Yossef
[not found] ` <CAFXBA=n6W_n1P=NKHEUAgpaDDrdmh4QwB4aYma9xyio7UFP3Vw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-09-03 6:17 ` Gilad Ben-Yossef
2017-09-05 11:23 ` Harsh Jain
2017-09-05 12:16 ` Gilad Ben-Yossef
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1503584350-7831-13-git-send-email-gilad@benyossef.com \
--to=gilad-6s/dczaozh3wxxrugsxzzg@public.gmane.org \
--cc=agk-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=arno-LkuqDEemtHBg9hUCZPvPmw@public.gmane.org \
--cc=boris.brezillon-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=corbet-T1hC0tSOHrs@public.gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
--cc=dhowells-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=dm-devel-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=dmitry.kasatkin-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=gary.hook-5C7GfCeVMHo@public.gmane.org \
--cc=herbert-lOAM2aK0SrRLBo1qDEOMRrpzq4S04n8Q@public.gmane.org \
--cc=jaegeuk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=james.l.morris-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=linux-crypto@v \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mpatocka-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=ofir.drang-5wv7dgnIgG8@public.gmane.org \
--cc=serge-A9i7LUbDfNHQT0dZR+AlfA@public.gmane.org \
--cc=sfrench-eUNUBHrolfbYtjvyW6yDsg@public.gmane.org \
--cc=shli-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=snitzer-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=thomas.lendacky-5C7GfCeVMHo@public.gmane.org \
--cc=tytso-3s7WtUTddSA@public.gmane.org \
--cc=zohar-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox