Re: [PATCH v4 6/6] crypto: qcom: Add ACPI support

Jeffrey Hugo
2018-07-05T19:51:38Z

On 7/4/2018 5:44 AM, Vinod Koul wrote:
> From: Timur Tabi <timur@codeaurora.org>
>
> Add support for probing on ACPI systems, with ACPI HID QCOM8160.
>
> On ACPI systems, clocks are always enabled, the PRNG should
> already be enabled, and the register region is read-only.
> The driver only verifies that the hardware is already
> enabled never tries to disable or configure it.
>
> Signed-off-by: Timur Tabi <timur@codeaurora.org>
> [port to crypto API]
> Signed-off-by: Vinod Koul <vkoul@kernel.org>

Tested-by: Jeffrey Hugo <jhugo@codeaurora.org>

> ---
> drivers/crypto/qcom-rng.c | 30 ++++++++++++++++++++++++++----
> 1 file changed, 26 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/crypto/qcom-rng.c b/drivers/crypto/qcom-rng.c
> index f1bd86acaf9d..385352e200db 100644
> --- a/drivers/crypto/qcom-rng.c
> +++ b/drivers/crypto/qcom-rng.c
> @@ -4,6 +4,7 @@
> // Based on msm-rng.c and downstream driver
>
> #include <crypto/internal/rng.h>
> +#include <linux/acpi.h>
> #include <linux/clk.h>
> #include <linux/crypto.h>
> #include <linux/module.h>
> @@ -168,11 +169,21 @@ static int qcom_rng_probe(struct platform_device *pdev)
> if (IS_ERR(rng->base))
> return PTR_ERR(rng->base);
>
> - rng->clk = devm_clk_get(&pdev->dev, "core");
> - if (IS_ERR(rng->clk))
> - return PTR_ERR(rng->clk);
>
> - rng->skip_init = (unsigned long)of_device_get_match_data(&pdev->dev);
> + /*
> + * ACPI systems have v2 hardware. The clocks are always enabled,
> + * and we should skip init
> + */
> + if (has_acpi_companion(&pdev->dev)) {
> + rng->skip_init = 1;
> + } else {
> + rng->clk = devm_clk_get(&pdev->dev, "core");
> + if (IS_ERR(rng->clk))
> + return PTR_ERR(rng->clk);
> +
> + rng->skip_init =
> + (unsigned long)of_device_get_match_data(&pdev->dev);
> + }
>
> qcom_rng_dev = rng;
> ret = crypto_register_rng(&qcom_rng_alg);
> @@ -193,6 +204,16 @@ static int qcom_rng_remove(struct platform_device *pdev)
> return 0;
> }
>
> +#if IS_ENABLED(CONFIG_ACPI)
> +static const struct acpi_device_id qcom_rng_acpi_match[] = {
> + {
> + .id = "QCOM8160",
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(acpi, qcom_rng_acpi_match);
> +#endif
> +
> static const struct of_device_id qcom_rng_of_match[] = {
> { .compatible = "qcom,prng", .data = (void *)0},
> { .compatible = "qcom,prng-ee", .data = (void *)1},
> @@ -206,6 +227,7 @@ static struct platform_driver qcom_rng_driver = {
> .driver = {
> .name = KBUILD_MODNAME,
> .of_match_table = of_match_ptr(qcom_rng_of_match),
> + .acpi_match_table = ACPI_PTR(qcom_rng_acpi_match),
> }
> };
> module_platform_driver(qcom_rng_driver);
>

--
Jeffrey Hugo
Qualcomm Datacenter Technologies as an affiliate of Qualcomm
Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.