[RFC PATCH V2 0/4] Add Xilinx's ZynqMP SHA3 driver support

[RFC PATCH V2 0/4] Add Xilinx's ZynqMP SHA3 driver support

[Kalyani Akula]

This patch set adds support for
- dt-binding docs for Xilinx ZynqMP SHA3 driver
- Adds communication layer support for sha_hash in zynqmp.c
- Adds Xilinx ZynqMP driver for SHA3 Algorithm
- Adds device tree node for ZynqMP SHA3 driver

V2 Changes :
- Added new patch (2/4) for sha_hash zynqmp API support
- Incorporated code review comments from v1 patch series. Discussed below:
        https://lore.kernel.org/patchwork/patch/1029433/

Kalyani Akula (4):
  dt-bindings: crypto: Add bindings for ZynqMP SHA3 driver
  firmware: xilinx: Add ZynqMP sha_hash API for SHA3 functionality
  crypto: Add Xilinx SHA3 driver
  ARM64: zynqmp: Add Xilinix SHA-384 node.

 .../devicetree/bindings/crypto/zynqmp-sha.txt      |   12 +
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi             |    4 +
 drivers/crypto/Kconfig                             |   10 +
 drivers/crypto/Makefile                            |    1 +
 drivers/crypto/zynqmp-sha.c                        |  305 ++++++++++++++++++++
 drivers/firmware/xilinx/zynqmp.c                   |   27 ++
 include/linux/firmware/xlnx-zynqmp.h               |    2 +
 7 files changed, 361 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/crypto/zynqmp-sha.txt
 create mode 100644 drivers/crypto/zynqmp-sha.c

[RFC PATCH V2 1/4] dt-bindings: crypto: Add bindings for ZynqMP SHA3 driver

[Kalyani Akula]

Add documentation to describe Xilinx ZynqMP SHA3 driver
bindings.

Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
---
 .../devicetree/bindings/crypto/zynqmp-sha.txt      |   12 ++++++++++++
 1 files changed, 12 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/crypto/zynqmp-sha.txt

diff --git a/Documentation/devicetree/bindings/crypto/zynqmp-sha.txt b/Documentation/devicetree/bindings/crypto/zynqmp-sha.txt
new file mode 100644
index 0000000..c7be6e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/zynqmp-sha.txt
@@ -0,0 +1,12 @@
+Xilinx ZynqMP SHA3(keccak-384) hw acceleration support.
+
+The ZynqMp PS-SHA hw accelerator is used to calculate the
+SHA3(keccak-384) hash value on the given user data.
+
+Required properties:
+- compatible:	should contain "xlnx,zynqmp-keccak-384"
+
+Example:
+	xlnx_keccak_384: sha384 {
+		compatible = "xlnx,zynqmp-keccak-384";
+	};
-- 
1.7.1

[RFC PATCH V2 2/4] firmware: xilinx: Add ZynqMP sha_hash API for SHA3 functionality

[Kalyani Akula]

Add ZynqMP firmware SHA_HASH API to compute SHA3 hash of given data.

Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
---
 drivers/firmware/xilinx/zynqmp.c     |   27 +++++++++++++++++++++++++++
 include/linux/firmware/xlnx-zynqmp.h |    2 ++
 2 files changed, 29 insertions(+), 0 deletions(-)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 9a1c72a..c51ecce 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -469,8 +469,35 @@ static int zynqmp_pm_ioctl(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2,
 				   arg1, arg2, out);
 }
 
+/**
+ * zynqmp_pm_sha_hash - Access the SHA engine to calculate the hash
+ * @address:	Address of the data/ Address of output buffer where
+ *		hash should be stored.
+ * @size:	Size of the data.
+ * @flags:
+ *	BIT(0) - for initializing csudma driver and SHA3(Here address
+ *		 and size inputs can be NULL).
+ *	BIT(1) - to call Sha3_Update API which can be called multiple
+ *		 times when data is not contiguous.
+ *	BIT(2) - to get final hash of the whole updated data.
+ *		 Hash will be overwritten at provided address with
+ *		 48 bytes.
+ *
+ * Return:	Returns status, either success or error code.
+ */
+static int zynqmp_pm_sha_hash(const u64 address, const u32 size,
+			      const u32 flags)
+{
+	u32 lower_32_bits = (u32)address;
+	u32 upper_32_bits = (u32)(address >> 32);
+
+	return zynqmp_pm_invoke_fn(PM_SECURE_SHA, upper_32_bits, lower_32_bits,
+				   size, flags, NULL);
+}
+
 static const struct zynqmp_eemi_ops eemi_ops = {
 	.get_api_version = zynqmp_pm_get_api_version,
+	.sha_hash = zynqmp_pm_sha_hash,
 	.query_data = zynqmp_pm_query_data,
 	.clock_enable = zynqmp_pm_clock_enable,
 	.clock_disable = zynqmp_pm_clock_disable,
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 3c3c28e..72ffe09 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -34,6 +34,7 @@
 
 enum pm_api_id {
 	PM_GET_API_VERSION = 1,
+	PM_SECURE_SHA = 26,
 	PM_IOCTL = 34,
 	PM_QUERY_DATA,
 	PM_CLOCK_ENABLE,
@@ -102,6 +103,7 @@ struct zynqmp_eemi_ops {
 	int (*clock_setparent)(u32 clock_id, u32 parent_id);
 	int (*clock_getparent)(u32 clock_id, u32 *parent_id);
 	int (*ioctl)(u32 node_id, u32 ioctl_id, u32 arg1, u32 arg2, u32 *out);
+	int (*sha_hash)(const u64 address, const u32 size, const u32 flags);
 };
 
 #if IS_REACHABLE(CONFIG_ARCH_ZYNQMP)
-- 
1.7.1

[RFC PATCH V2 3/4] crypto: Add Xilinx SHA3 driver

[Kalyani Akula]

This patch adds SHA3 driver support for the Xilinx
ZynqMP SoC.

Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
---
 drivers/crypto/Kconfig      |   10 ++
 drivers/crypto/Makefile     |    1 +
 drivers/crypto/zynqmp-sha.c |  305 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 316 insertions(+), 0 deletions(-)
 create mode 100644 drivers/crypto/zynqmp-sha.c

diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 5a90075..b723e23 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -667,6 +667,16 @@ config CRYPTO_DEV_ROCKCHIP
 	  This driver interfaces with the hardware crypto accelerator.
 	  Supporting cbc/ecb chainmode, and aes/des/des3_ede cipher mode.
 
+config CRYPTO_DEV_ZYNQMP_SHA3
+	tristate "Support for Xilinx ZynqMP SHA3 hw accelerator"
+	depends on ARCH_ZYNQMP || COMPILE_TEST
+	select CRYPTO_HASH
+	help
+	  Xilinx ZynqMP has SHA3 engine used for secure hash calculation.
+	  This driver interfaces with SHA3 hw engine.
+	  Select this if you want to use the ZynqMP module
+	  for SHA3 hash computation.
+
 config CRYPTO_DEV_MEDIATEK
 	tristate "MediaTek's EIP97 Cryptographic Engine driver"
 	depends on (ARM && ARCH_MEDIATEK) || COMPILE_TEST
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 8e7e225..64c29fe 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_CRYPTO_DEV_BCM_SPU) += bcm/
 obj-$(CONFIG_CRYPTO_DEV_SAFEXCEL) += inside-secure/
 obj-$(CONFIG_CRYPTO_DEV_ARTPEC6) += axis/
 obj-y += hisilicon/
+obj-$(CONFIG_CRYPTO_DEV_ZYNQMP_SHA3) += zynqmp-sha.o
diff --git a/drivers/crypto/zynqmp-sha.c b/drivers/crypto/zynqmp-sha.c
new file mode 100644
index 0000000..56e83cf
--- /dev/null
+++ b/drivers/crypto/zynqmp-sha.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cryptographic API.
+ *
+ * Support for Xilinx ZynqMP SHA3 HW Acceleration.
+ *
+ * Copyright (c) 2018 Xilinx Inc.
+ *
+ */
+#include <asm/cacheflush.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_device.h>
+#include <linux/crypto.h>
+#include <linux/cryptohash.h>
+#include <crypto/scatterwalk.h>
+#include <crypto/algapi.h>
+#include <crypto/sha.h>
+#include <crypto/hash.h>
+#include <crypto/internal/hash.h>
+#include <linux/firmware/xlnx-zynqmp.h>
+
+#define ZYNQMP_SHA3_INIT	1
+#define ZYNQMP_SHA3_UPDATE	2
+#define ZYNQMP_SHA3_FINAL	4
+
+#define ZYNQMP_SHA_QUEUE_LENGTH	1
+
+struct zynqmp_sha_dev;
+
+/*
+ * .statesize = sizeof(struct zynqmp_sha_reqctx) must be <= PAGE_SIZE / 8 as
+ *  tested by the ahash_prepare_alg() function.
+ */
+struct zynqmp_sha_reqctx {
+	struct zynqmp_sha_dev	*dd;
+	unsigned long		flags;
+};
+
+struct zynqmp_sha_ctx {
+	struct zynqmp_sha_dev	*dd;
+	unsigned long		flags;
+};
+
+struct zynqmp_sha_dev {
+	struct list_head	list;
+	struct device		*dev;
+	/* the lock protects queue and dev list*/
+	spinlock_t		lock;
+	int			err;
+
+	unsigned long		flags;
+	struct crypto_queue	queue;
+	struct ahash_request	*req;
+};
+
+struct zynqmp_sha_drv {
+	struct list_head	dev_list;
+	/* the lock protects dev list*/
+	spinlock_t		lock;
+};
+
+static struct zynqmp_sha_drv zynqmp_sha = {
+	.dev_list = LIST_HEAD_INIT(zynqmp_sha.dev_list),
+	.lock = __SPIN_LOCK_UNLOCKED(zynqmp_sha.lock),
+};
+
+static int zynqmp_sha_init(struct ahash_request *req)
+{
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+	struct zynqmp_sha_reqctx *ctx = ahash_request_ctx(req);
+	struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
+	struct zynqmp_sha_ctx *tctx = crypto_ahash_ctx(tfm);
+	struct zynqmp_sha_dev *dd = NULL;
+	struct zynqmp_sha_dev *tmp;
+	int ret;
+
+	if (!eemi_ops || !eemi_ops->sha_hash)
+		return -ENOTSUPP;
+
+	spin_lock_bh(&zynqmp_sha.lock);
+	if (!tctx->dd) {
+		list_for_each_entry(tmp, &zynqmp_sha.dev_list, list) {
+			dd = tmp;
+			break;
+		}
+		tctx->dd = dd;
+	} else {
+		dd = tctx->dd;
+	}
+	spin_unlock_bh(&zynqmp_sha.lock);
+
+	ctx->dd = dd;
+	dev_dbg(dd->dev, "init: digest size: %d\n",
+		crypto_ahash_digestsize(tfm));
+
+	ret = eemi_ops->sha_hash(0, 0, ZYNQMP_SHA3_INIT);
+
+	return ret;
+}
+
+static int zynqmp_sha_update(struct ahash_request *req)
+{
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+	struct zynqmp_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
+	struct zynqmp_sha_dev *dd = tctx->dd;
+	size_t dma_size = req->nbytes;
+	dma_addr_t dma_addr;
+	char *kbuf;
+	int ret;
+
+	if (!req->nbytes)
+		return 0;
+
+	if (!eemi_ops || !eemi_ops->sha_hash)
+		return -ENOTSUPP;
+
+	kbuf = dma_alloc_coherent(dd->dev, dma_size, &dma_addr, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	scatterwalk_map_and_copy(kbuf, req->src, 0, req->nbytes, 0);
+	 __flush_cache_user_range((unsigned long)kbuf,
+				  (unsigned long)kbuf + dma_size);
+	ret = eemi_ops->sha_hash(dma_addr, req->nbytes, ZYNQMP_SHA3_UPDATE);
+	dma_free_coherent(dd->dev, dma_size, kbuf, dma_addr);
+
+	return ret;
+}
+
+static int zynqmp_sha_final(struct ahash_request *req)
+{
+	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
+	struct zynqmp_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
+	struct zynqmp_sha_dev *dd = tctx->dd;
+	size_t dma_size = SHA384_DIGEST_SIZE;
+	dma_addr_t dma_addr;
+	char *kbuf;
+	int ret;
+
+	if (!eemi_ops || !eemi_ops->sha_hash)
+		return -ENOTSUPP;
+
+	kbuf = dma_alloc_coherent(dd->dev, dma_size, &dma_addr, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	ret = eemi_ops->sha_hash(dma_addr, dma_size, ZYNQMP_SHA3_FINAL);
+	memcpy(req->result, kbuf, SHA384_DIGEST_SIZE);
+	dma_free_coherent(dd->dev, dma_size, kbuf, dma_addr);
+
+	return ret;
+}
+
+static int zynqmp_sha_finup(struct ahash_request *req)
+{
+	zynqmp_sha_update(req);
+	zynqmp_sha_final(req);
+
+	return 0;
+}
+
+static int zynqmp_sha_digest(struct ahash_request *req)
+{
+	zynqmp_sha_init(req);
+	zynqmp_sha_update(req);
+	zynqmp_sha_final(req);
+
+	return 0;
+}
+
+static int zynqmp_sha_export(struct ahash_request *req, void *out)
+{
+	const struct zynqmp_sha_reqctx *ctx = ahash_request_ctx(req);
+
+	memcpy(out, ctx, sizeof(*ctx));
+	return 0;
+}
+
+static int zynqmp_sha_import(struct ahash_request *req, const void *in)
+{
+	struct zynqmp_sha_reqctx *ctx = ahash_request_ctx(req);
+
+	memcpy(ctx, in, sizeof(*ctx));
+	return 0;
+}
+
+static int zynqmp_sha_cra_init(struct crypto_tfm *tfm)
+{
+	crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
+				 sizeof(struct zynqmp_sha_reqctx));
+
+	return 0;
+}
+
+static struct ahash_alg sha3_alg = {
+	.init		= zynqmp_sha_init,
+	.update		= zynqmp_sha_update,
+	.final		= zynqmp_sha_final,
+	.finup		= zynqmp_sha_finup,
+	.digest		= zynqmp_sha_digest,
+	.export		= zynqmp_sha_export,
+	.import		= zynqmp_sha_import,
+	.halg = {
+		.digestsize	= SHA384_DIGEST_SIZE,
+		.statesize	= sizeof(struct sha256_state),
+		.base	= {
+			.cra_name		= "xilinx-keccak-384",
+			.cra_driver_name	= "zynqmp-keccak-384",
+			.cra_priority		= 300,
+			.cra_flags		= CRYPTO_ALG_ASYNC,
+			.cra_blocksize		= SHA384_BLOCK_SIZE,
+			.cra_ctxsize		= sizeof(struct zynqmp_sha_ctx),
+			.cra_alignmask		= 0,
+			.cra_module		= THIS_MODULE,
+			.cra_init		= zynqmp_sha_cra_init,
+		}
+	}
+};
+
+static const struct of_device_id zynqmp_sha_dt_ids[] = {
+	{ .compatible = "xlnx,zynqmp-keccak-384" },
+	{ /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, zynqmp_sha_dt_ids);
+
+static int zynqmp_sha_probe(struct platform_device *pdev)
+{
+	struct zynqmp_sha_dev *sha_dd;
+	struct device *dev = &pdev->dev;
+	int err;
+
+	sha_dd = devm_kzalloc(&pdev->dev, sizeof(*sha_dd), GFP_KERNEL);
+	if (!sha_dd)
+		return -ENOMEM;
+
+	sha_dd->dev = dev;
+	platform_set_drvdata(pdev, sha_dd);
+	INIT_LIST_HEAD(&sha_dd->list);
+	spin_lock_init(&sha_dd->lock);
+	crypto_init_queue(&sha_dd->queue, ZYNQMP_SHA_QUEUE_LENGTH);
+	spin_lock(&zynqmp_sha.lock);
+	list_add_tail(&sha_dd->list, &zynqmp_sha.dev_list);
+	spin_unlock(&zynqmp_sha.lock);
+
+	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44));
+	if (err < 0) {
+		dev_err(dev, "no usable DMA configuration");
+		goto err_algs;
+	}
+
+	err = crypto_register_ahash(&sha3_alg);
+	if (err)
+		goto err_algs;
+
+	return 0;
+
+err_algs:
+	spin_lock(&zynqmp_sha.lock);
+	list_del(&sha_dd->list);
+	spin_unlock(&zynqmp_sha.lock);
+	dev_err(dev, "initialization failed.\n");
+
+	return err;
+}
+
+static int zynqmp_sha_remove(struct platform_device *pdev)
+{
+	static struct zynqmp_sha_dev *sha_dd;
+
+	sha_dd = platform_get_drvdata(pdev);
+
+	if (!sha_dd)
+		return -ENODEV;
+
+	spin_lock(&zynqmp_sha.lock);
+	list_del(&sha_dd->list);
+	spin_unlock(&zynqmp_sha.lock);
+
+	crypto_unregister_ahash(&sha3_alg);
+
+	return 0;
+}
+
+static struct platform_driver zynqmp_sha_driver = {
+	.probe		= zynqmp_sha_probe,
+	.remove		= zynqmp_sha_remove,
+	.driver		= {
+		.name	= "zynqmp-keccak-384",
+		.of_match_table	= of_match_ptr(zynqmp_sha_dt_ids),
+	},
+};
+
+module_platform_driver(zynqmp_sha_driver);
+
+MODULE_DESCRIPTION("ZynqMP SHA3 hw acceleration support.");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Nava kishore Manne <navam@xilinx.com>");
-- 
1.7.1

Re: [RFC PATCH V2 3/4] crypto: Add Xilinx SHA3 driver

[Corentin Labbe]

On Wed, Jan 09, 2019 at 02:56:24PM +0530, Kalyani Akula wrote:
> This patch adds SHA3 driver support for the Xilinx
> ZynqMP SoC.
> 
> Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
> ---
>  drivers/crypto/Kconfig      |   10 ++
>  drivers/crypto/Makefile     |    1 +
>  drivers/crypto/zynqmp-sha.c |  305 +++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 316 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/crypto/zynqmp-sha.c

Hello

I have some comment below

> +static int zynqmp_sha_update(struct ahash_request *req)
> +{
> +	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
> +	struct zynqmp_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
> +	struct zynqmp_sha_dev *dd = tctx->dd;
> +	size_t dma_size = req->nbytes;
> +	dma_addr_t dma_addr;
> +	char *kbuf;
> +	int ret;
> +
> +	if (!req->nbytes)
> +		return 0;
> +
> +	if (!eemi_ops || !eemi_ops->sha_hash)
> +		return -ENOTSUPP;
> +
> +	kbuf = dma_alloc_coherent(dd->dev, dma_size, &dma_addr, GFP_KERNEL);
> +	if (!kbuf)
> +		return -ENOMEM;
> +
> +	scatterwalk_map_and_copy(kbuf, req->src, 0, req->nbytes, 0);
> +	 __flush_cache_user_range((unsigned long)kbuf,
> +				  (unsigned long)kbuf + dma_size);

Since kbuf is in dma coherent memory, I dont understand why do you flush cache.

> +	ret = eemi_ops->sha_hash(dma_addr, req->nbytes, ZYNQMP_SHA3_UPDATE);
> +	dma_free_coherent(dd->dev, dma_size, kbuf, dma_addr);

Since your update function does not return/write any result, I suppose that the resulat is kept in hardware, so what happen if two hash process happen in parallel ?
Furthermore, how do you have tested import/export function ?
Anyway, I am sure they are totally buggy.

> +
> +	return ret;
> +}
> +
> +static int zynqmp_sha_final(struct ahash_request *req)
> +{
> +	const struct zynqmp_eemi_ops *eemi_ops = zynqmp_pm_get_eemi_ops();
> +	struct zynqmp_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
> +	struct zynqmp_sha_dev *dd = tctx->dd;
> +	size_t dma_size = SHA384_DIGEST_SIZE;
> +	dma_addr_t dma_addr;
> +	char *kbuf;
> +	int ret;
> +
> +	if (!eemi_ops || !eemi_ops->sha_hash)
> +		return -ENOTSUPP;

You can do this check at probe time.

> +static int zynqmp_sha_finup(struct ahash_request *req)
> +{
> +	zynqmp_sha_update(req);
> +	zynqmp_sha_final(req);
> +
> +	return 0;
> +}
> +
> +static int zynqmp_sha_digest(struct ahash_request *req)
> +{
> +	zynqmp_sha_init(req);
> +	zynqmp_sha_update(req);
> +	zynqmp_sha_final(req);
> +
> +	return 0;
> +}

So you ignore the return value of zynqmp_sha_init/zynqmp_sha_update/zynqmp_sha_final().

> +static int zynqmp_sha_probe(struct platform_device *pdev)
> +{
> +	struct zynqmp_sha_dev *sha_dd;
> +	struct device *dev = &pdev->dev;
> +	int err;
> +
> +	sha_dd = devm_kzalloc(&pdev->dev, sizeof(*sha_dd), GFP_KERNEL);
> +	if (!sha_dd)
> +		return -ENOMEM;
> +
> +	sha_dd->dev = dev;
> +	platform_set_drvdata(pdev, sha_dd);
> +	INIT_LIST_HEAD(&sha_dd->list);
> +	spin_lock_init(&sha_dd->lock);
> +	crypto_init_queue(&sha_dd->queue, ZYNQMP_SHA_QUEUE_LENGTH);

As already said in my last review, why init the queue if you do not use it ?


> +	spin_lock(&zynqmp_sha.lock);
> +	list_add_tail(&sha_dd->list, &zynqmp_sha.dev_list);
> +	spin_unlock(&zynqmp_sha.lock);

Why do you maintain a device list ?
Clearly your current driver support only one hardware instance.

Regards

RE: [RFC PATCH V2 3/4] crypto: Add Xilinx SHA3 driver

[Kalyani Akula]

Hi Corentin,

Sorry for the delayed response.
Please find my responses inline.

> -----Original Message-----
> From: Corentin Labbe <clabbe.montjoie@gmail.com>
> Sent: Thursday, January 10, 2019 7:28 PM
> To: Kalyani Akula <kalyania@xilinx.com>
> Cc: herbert@gondor.apana.org.au; davem@davemloft.net; linux-
> crypto@vger.kernel.org; linux-kernel@vger.kernel.org; Kalyani Akula
> <kalyania@xilinx.com>; Sarat Chand Savitala <saratcha@xilinx.com>
> Subject: Re: [RFC PATCH V2 3/4] crypto: Add Xilinx SHA3 driver
> 
> On Wed, Jan 09, 2019 at 02:56:24PM +0530, Kalyani Akula wrote:
> > This patch adds SHA3 driver support for the Xilinx ZynqMP SoC.
> >
> > Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
> > ---
> >  drivers/crypto/Kconfig      |   10 ++
> >  drivers/crypto/Makefile     |    1 +
> >  drivers/crypto/zynqmp-sha.c |  305
> > +++++++++++++++++++++++++++++++++++++++++++
> >  3 files changed, 316 insertions(+), 0 deletions(-)  create mode
> > 100644 drivers/crypto/zynqmp-sha.c
> 
> Hello
> 
> I have some comment below
> 
> > +static int zynqmp_sha_update(struct ahash_request *req) {
> > +	const struct zynqmp_eemi_ops *eemi_ops =
> zynqmp_pm_get_eemi_ops();
> > +	struct zynqmp_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
> > +	struct zynqmp_sha_dev *dd = tctx->dd;
> > +	size_t dma_size = req->nbytes;
> > +	dma_addr_t dma_addr;
> > +	char *kbuf;
> > +	int ret;
> > +
> > +	if (!req->nbytes)
> > +		return 0;
> > +
> > +	if (!eemi_ops || !eemi_ops->sha_hash)
> > +		return -ENOTSUPP;
> > +
> > +	kbuf = dma_alloc_coherent(dd->dev, dma_size, &dma_addr,
> GFP_KERNEL);
> > +	if (!kbuf)
> > +		return -ENOMEM;
> > +
> > +	scatterwalk_map_and_copy(kbuf, req->src, 0, req->nbytes, 0);
> > +	 __flush_cache_user_range((unsigned long)kbuf,
> > +				  (unsigned long)kbuf + dma_size);
> 
> Since kbuf is in dma coherent memory, I dont understand why do you flush
> cache.
[kalyani] Agree, not required will fix in next version.
> 
> > +	ret = eemi_ops->sha_hash(dma_addr, req->nbytes,
> ZYNQMP_SHA3_UPDATE);
> > +	dma_free_coherent(dd->dev, dma_size, kbuf, dma_addr);
> 
> Since your update function does not return/write any result, I suppose that
> the resulat is kept in hardware, so what happen if two hash process happen
> in parallel ?
[kalyani] yes, the result will be stored in SHA3 engine.
Firmware don't have the support to process 2 hash requests in parallel using IPI
> Furthermore, how do you have tested import/export function ?
> Anyway, I am sure they are totally buggy.
> 
[kalyani] I will verify and fix in the next version
> > +
> > +	return ret;
> > +}
> > +
> > +static int zynqmp_sha_final(struct ahash_request *req) {
> > +	const struct zynqmp_eemi_ops *eemi_ops =
> zynqmp_pm_get_eemi_ops();
> > +	struct zynqmp_sha_ctx *tctx = crypto_tfm_ctx(req->base.tfm);
> > +	struct zynqmp_sha_dev *dd = tctx->dd;
> > +	size_t dma_size = SHA384_DIGEST_SIZE;
> > +	dma_addr_t dma_addr;
> > +	char *kbuf;
> > +	int ret;
> > +
> > +	if (!eemi_ops || !eemi_ops->sha_hash)
> > +		return -ENOTSUPP;
> 
> You can do this check at probe time.
[kalyani] Yes, will fix in next version
> 
> > +static int zynqmp_sha_finup(struct ahash_request *req) {
> > +	zynqmp_sha_update(req);
> > +	zynqmp_sha_final(req);
> > +
> > +	return 0;
> > +}
> > +
> > +static int zynqmp_sha_digest(struct ahash_request *req) {
> > +	zynqmp_sha_init(req);
> > +	zynqmp_sha_update(req);
> > +	zynqmp_sha_final(req);
> > +
> > +	return 0;
> > +}
> 
> So you ignore the return value of
> zynqmp_sha_init/zynqmp_sha_update/zynqmp_sha_final().
> 
> > +static int zynqmp_sha_probe(struct platform_device *pdev) {
> > +	struct zynqmp_sha_dev *sha_dd;
> > +	struct device *dev = &pdev->dev;
> > +	int err;
> > +
> > +	sha_dd = devm_kzalloc(&pdev->dev, sizeof(*sha_dd),
> GFP_KERNEL);
> > +	if (!sha_dd)
> > +		return -ENOMEM;
> > +
> > +	sha_dd->dev = dev;
> > +	platform_set_drvdata(pdev, sha_dd);
> > +	INIT_LIST_HEAD(&sha_dd->list);
> > +	spin_lock_init(&sha_dd->lock);
> > +	crypto_init_queue(&sha_dd->queue,
> ZYNQMP_SHA_QUEUE_LENGTH);
> 
> As already said in my last review, why init the queue if you do not use it ?
> 
> 
> > +	spin_lock(&zynqmp_sha.lock);
> > +	list_add_tail(&sha_dd->list, &zynqmp_sha.dev_list);
> > +	spin_unlock(&zynqmp_sha.lock);
> 
> Why do you maintain a device list ?
> Clearly your current driver support only one hardware instance.
[kalyani] True, driver support only one HW instance , will fix in the next version

Regards,
kalyani
> 
> Regards

[RFC PATCH V2 4/4] ARM64: zynqmp: Add Xilinix SHA-384 node.

[Kalyani Akula]

This patch adds a SHA3 DT node for Xilinx ZynqMP SoC.

Signed-off-by: Kalyani Akula <kalyani.akula@xilinx.com>
---
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index fa4fd77..a3be330 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -124,6 +124,10 @@
 			     <1 10 0xf08>;
 	};
 
+	xlnx_keccak_384: sha384 {
+		compatible = "xlnx,zynqmp-keccak-384";
+	};
+
 	amba_apu: amba-apu@0 {
 		compatible = "simple-bus";
 		#address-cells = <2>;
-- 
1.7.1