* [PATCH 2/2] crypto: arm64/aes-ctr - improve tail handling
2020-12-17 18:55 [PATCH 1/2] crypto: arm64/aes-ce - really hide slower algos when faster ones are enabled Ard Biesheuvel
@ 2020-12-17 18:55 ` Ard Biesheuvel
2021-01-02 22:08 ` Herbert Xu
2021-01-02 22:08 ` [PATCH 1/2] crypto: arm64/aes-ce - really hide slower algos when faster ones are enabled Herbert Xu
1 sibling, 1 reply; 4+ messages in thread
From: Ard Biesheuvel @ 2020-12-17 18:55 UTC (permalink / raw)
To: linux-crypto; +Cc: herbert, Ard Biesheuvel
Counter mode is a stream cipher chaining mode that is typically used
with inputs that are of arbitrarily length, and so a tail block which
is smaller than a full AES block is rule rather than exception.
The current ctr(aes) implementation for arm64 always makes a separate
call into the assembler routine to process this tail block, which is
suboptimal, given that it requires reloading of the AES round keys,
and prevents us from handling this tail block using the 5-way stride
that we use for better performance on deep pipelines.
So let's update the assembler routine so it can handle any input size,
and uses NEON permutation instructions and overlapping loads and stores
to handle the tail block. This results in a ~16% speedup for 1420 byte
blocks on cores with deep pipelines such as ThunderX2.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
---
arch/arm64/crypto/aes-glue.c | 46 +++---
arch/arm64/crypto/aes-modes.S | 165 +++++++++++++-------
2 files changed, 137 insertions(+), 74 deletions(-)
diff --git a/arch/arm64/crypto/aes-glue.c b/arch/arm64/crypto/aes-glue.c
index cafb5b96be0e..e7f116d833b9 100644
--- a/arch/arm64/crypto/aes-glue.c
+++ b/arch/arm64/crypto/aes-glue.c
@@ -24,6 +24,7 @@
#ifdef USE_V8_CRYPTO_EXTENSIONS
#define MODE "ce"
#define PRIO 300
+#define STRIDE 5
#define aes_expandkey ce_aes_expandkey
#define aes_ecb_encrypt ce_aes_ecb_encrypt
#define aes_ecb_decrypt ce_aes_ecb_decrypt
@@ -41,6 +42,7 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 Crypto Extensions");
#else
#define MODE "neon"
#define PRIO 200
+#define STRIDE 4
#define aes_ecb_encrypt neon_aes_ecb_encrypt
#define aes_ecb_decrypt neon_aes_ecb_decrypt
#define aes_cbc_encrypt neon_aes_cbc_encrypt
@@ -87,7 +89,7 @@ asmlinkage void aes_cbc_cts_decrypt(u8 out[], u8 const in[], u32 const rk[],
int rounds, int bytes, u8 const iv[]);
asmlinkage void aes_ctr_encrypt(u8 out[], u8 const in[], u32 const rk[],
- int rounds, int blocks, u8 ctr[]);
+ int rounds, int bytes, u8 ctr[], u8 finalbuf[]);
asmlinkage void aes_xts_encrypt(u8 out[], u8 const in[], u32 const rk1[],
int rounds, int bytes, u32 const rk2[], u8 iv[],
@@ -448,34 +450,36 @@ static int ctr_encrypt(struct skcipher_request *req)
struct crypto_aes_ctx *ctx = crypto_skcipher_ctx(tfm);
int err, rounds = 6 + ctx->key_length / 4;
struct skcipher_walk walk;
- int blocks;
err = skcipher_walk_virt(&walk, req, false);
- while ((blocks = (walk.nbytes / AES_BLOCK_SIZE))) {
- kernel_neon_begin();
- aes_ctr_encrypt(walk.dst.virt.addr, walk.src.virt.addr,
- ctx->key_enc, rounds, blocks, walk.iv);
- kernel_neon_end();
- err = skcipher_walk_done(&walk, walk.nbytes % AES_BLOCK_SIZE);
- }
- if (walk.nbytes) {
- u8 __aligned(8) tail[AES_BLOCK_SIZE];
+ while (walk.nbytes > 0) {
+ const u8 *src = walk.src.virt.addr;
unsigned int nbytes = walk.nbytes;
- u8 *tdst = walk.dst.virt.addr;
- u8 *tsrc = walk.src.virt.addr;
+ u8 *dst = walk.dst.virt.addr;
+ u8 buf[AES_BLOCK_SIZE];
+ unsigned int tail;
- /*
- * Tell aes_ctr_encrypt() to process a tail block.
- */
- blocks = -1;
+ if (unlikely(nbytes < AES_BLOCK_SIZE))
+ src = memcpy(buf, src, nbytes);
+ else if (nbytes < walk.total)
+ nbytes &= ~(AES_BLOCK_SIZE - 1);
kernel_neon_begin();
- aes_ctr_encrypt(tail, NULL, ctx->key_enc, rounds,
- blocks, walk.iv);
+ aes_ctr_encrypt(dst, src, ctx->key_enc, rounds, nbytes,
+ walk.iv, buf);
kernel_neon_end();
- crypto_xor_cpy(tdst, tsrc, tail, nbytes);
- err = skcipher_walk_done(&walk, 0);
+
+ tail = nbytes % (STRIDE * AES_BLOCK_SIZE);
+ if (tail > 0 && tail < AES_BLOCK_SIZE)
+ /*
+ * The final partial block could not be returned using
+ * an overlapping store, so it was passed via buf[]
+ * instead.
+ */
+ memcpy(dst + nbytes - tail, buf, tail);
+
+ err = skcipher_walk_done(&walk, walk.nbytes - nbytes);
}
return err;
diff --git a/arch/arm64/crypto/aes-modes.S b/arch/arm64/crypto/aes-modes.S
index cf618d8f6cec..3d1f97799899 100644
--- a/arch/arm64/crypto/aes-modes.S
+++ b/arch/arm64/crypto/aes-modes.S
@@ -321,42 +321,76 @@ AES_FUNC_END(aes_cbc_cts_decrypt)
/*
* aes_ctr_encrypt(u8 out[], u8 const in[], u8 const rk[], int rounds,
- * int blocks, u8 ctr[])
+ * int bytes, u8 ctr[], u8 finalbuf[])
*/
AES_FUNC_START(aes_ctr_encrypt)
stp x29, x30, [sp, #-16]!
mov x29, sp
- enc_prepare w3, x2, x6
+ enc_prepare w3, x2, x12
ld1 {vctr.16b}, [x5]
- umov x6, vctr.d[1] /* keep swabbed ctr in reg */
- rev x6, x6
- cmn w6, w4 /* 32 bit overflow? */
- bcs .Lctrloop
+ umov x12, vctr.d[1] /* keep swabbed ctr in reg */
+ rev x12, x12
+
.LctrloopNx:
- subs w4, w4, #MAX_STRIDE
- bmi .Lctr1x
- add w7, w6, #1
+ add w7, w4, #15
+ sub w4, w4, #MAX_STRIDE << 4
+ lsr w7, w7, #4
+ mov w8, #MAX_STRIDE
+ cmp w7, w8
+ csel w7, w7, w8, lt
+ adds x12, x12, x7
+
mov v0.16b, vctr.16b
- add w8, w6, #2
mov v1.16b, vctr.16b
- add w9, w6, #3
mov v2.16b, vctr.16b
- add w9, w6, #3
- rev w7, w7
mov v3.16b, vctr.16b
- rev w8, w8
ST5( mov v4.16b, vctr.16b )
- mov v1.s[3], w7
- rev w9, w9
-ST5( add w10, w6, #4 )
- mov v2.s[3], w8
-ST5( rev w10, w10 )
- mov v3.s[3], w9
-ST5( mov v4.s[3], w10 )
- ld1 {v5.16b-v7.16b}, [x1], #48 /* get 3 input blocks */
+ bcs 0f
+
+ .subsection 1
+ /* apply carry to outgoing counter */
+0: umov x8, vctr.d[0]
+ rev x8, x8
+ add x8, x8, #1
+ rev x8, x8
+ ins vctr.d[0], x8
+
+ /* apply carry to N counter blocks for N := x12 */
+ adr x16, 1f
+ sub x16, x16, x12, lsl #3
+ br x16
+ hint 34 // bti c
+ mov v0.d[0], vctr.d[0]
+ hint 34 // bti c
+ mov v1.d[0], vctr.d[0]
+ hint 34 // bti c
+ mov v2.d[0], vctr.d[0]
+ hint 34 // bti c
+ mov v3.d[0], vctr.d[0]
+ST5( hint 34 )
+ST5( mov v4.d[0], vctr.d[0] )
+1: b 2f
+ .previous
+
+2: rev x7, x12
+ ins vctr.d[1], x7
+ sub x7, x12, #MAX_STRIDE - 1
+ sub x8, x12, #MAX_STRIDE - 2
+ sub x9, x12, #MAX_STRIDE - 3
+ rev x7, x7
+ rev x8, x8
+ mov v1.d[1], x7
+ rev x9, x9
+ST5( sub x10, x12, #MAX_STRIDE - 4 )
+ mov v2.d[1], x8
+ST5( rev x10, x10 )
+ mov v3.d[1], x9
+ST5( mov v4.d[1], x10 )
+ tbnz w4, #31, .Lctrtail
+ ld1 {v5.16b-v7.16b}, [x1], #48
ST4( bl aes_encrypt_block4x )
ST5( bl aes_encrypt_block5x )
eor v0.16b, v5.16b, v0.16b
@@ -368,47 +402,72 @@ ST5( ld1 {v5.16b-v6.16b}, [x1], #32 )
ST5( eor v4.16b, v6.16b, v4.16b )
st1 {v0.16b-v3.16b}, [x0], #64
ST5( st1 {v4.16b}, [x0], #16 )
- add x6, x6, #MAX_STRIDE
- rev x7, x6
- ins vctr.d[1], x7
cbz w4, .Lctrout
b .LctrloopNx
-.Lctr1x:
- adds w4, w4, #MAX_STRIDE
- beq .Lctrout
-.Lctrloop:
- mov v0.16b, vctr.16b
- encrypt_block v0, w3, x2, x8, w7
-
- adds x6, x6, #1 /* increment BE ctr */
- rev x7, x6
- ins vctr.d[1], x7
- bcs .Lctrcarry /* overflow? */
-
-.Lctrcarrydone:
- subs w4, w4, #1
- bmi .Lctrtailblock /* blocks <0 means tail block */
- ld1 {v3.16b}, [x1], #16
- eor v3.16b, v0.16b, v3.16b
- st1 {v3.16b}, [x0], #16
- bne .Lctrloop
.Lctrout:
st1 {vctr.16b}, [x5] /* return next CTR value */
ldp x29, x30, [sp], #16
ret
-.Lctrtailblock:
- st1 {v0.16b}, [x0]
+.Lctrtail:
+ /* XOR up to MAX_STRIDE * 16 - 1 bytes of in/output with v0 ... v3/v4 */
+ mov x16, #16
+ ands x13, x4, #0xf
+ csel x13, x13, x16, ne
+
+ST5( cmp w4, #64 - (MAX_STRIDE << 4) )
+ST5( csel x14, x16, xzr, gt )
+ cmp w4, #48 - (MAX_STRIDE << 4)
+ csel x15, x16, xzr, gt
+ cmp w4, #32 - (MAX_STRIDE << 4)
+ csel x16, x16, xzr, gt
+ cmp w4, #16 - (MAX_STRIDE << 4)
+ ble .Lctrtail1x
+
+ adr_l x12, .Lcts_permute_table
+ add x12, x12, x13
+
+ST5( ld1 {v5.16b}, [x1], x14 )
+ ld1 {v6.16b}, [x1], x15
+ ld1 {v7.16b}, [x1], x16
+
+ST4( bl aes_encrypt_block4x )
+ST5( bl aes_encrypt_block5x )
+
+ ld1 {v8.16b}, [x1], x13
+ ld1 {v9.16b}, [x1]
+ ld1 {v10.16b}, [x12]
+
+ST4( eor v6.16b, v6.16b, v0.16b )
+ST4( eor v7.16b, v7.16b, v1.16b )
+ST4( tbl v3.16b, {v3.16b}, v10.16b )
+ST4( eor v8.16b, v8.16b, v2.16b )
+ST4( eor v9.16b, v9.16b, v3.16b )
+
+ST5( eor v5.16b, v5.16b, v0.16b )
+ST5( eor v6.16b, v6.16b, v1.16b )
+ST5( tbl v4.16b, {v4.16b}, v10.16b )
+ST5( eor v7.16b, v7.16b, v2.16b )
+ST5( eor v8.16b, v8.16b, v3.16b )
+ST5( eor v9.16b, v9.16b, v4.16b )
+
+ST5( st1 {v5.16b}, [x0], x14 )
+ st1 {v6.16b}, [x0], x15
+ st1 {v7.16b}, [x0], x16
+ add x13, x13, x0
+ st1 {v9.16b}, [x13] // overlapping stores
+ st1 {v8.16b}, [x0]
b .Lctrout
-.Lctrcarry:
- umov x7, vctr.d[0] /* load upper word of ctr */
- rev x7, x7 /* ... to handle the carry */
- add x7, x7, #1
- rev x7, x7
- ins vctr.d[0], x7
- b .Lctrcarrydone
+.Lctrtail1x:
+ csel x0, x0, x6, eq // use finalbuf if less than a full block
+ ld1 {v5.16b}, [x1]
+ST5( mov v3.16b, v4.16b )
+ encrypt_block v3, w3, x2, x8, w7
+ eor v5.16b, v5.16b, v3.16b
+ st1 {v5.16b}, [x0]
+ b .Lctrout
AES_FUNC_END(aes_ctr_encrypt)
--
2.17.1
^ permalink raw reply related [flat|nested] 4+ messages in thread